diff options
author | 张鹏 <sd20@qxwlan.com> | 2020-10-14 15:47:35 +0800 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-10-17 20:17:59 +0200 |
commit | 27a7d071c0e0576eddeb641d1f68abe1b6205aee (patch) | |
tree | 8feb827e45947f8c09709242f54f03529171b45c /target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338gw.dts | |
parent | 4a0688ed71532a3dd68907f5603177d970e4ec03 (diff) | |
download | upstream-27a7d071c0e0576eddeb641d1f68abe1b6205aee.tar.gz upstream-27a7d071c0e0576eddeb641d1f68abe1b6205aee.tar.bz2 upstream-27a7d071c0e0576eddeb641d1f68abe1b6205aee.zip |
ath79: add support for Qxwlan E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344 + QCA9334.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4G GHz (AR9344)
- 2x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction:
1.Using tftp mode with UART connection and original LEDE image
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin"
to "firmware.bin" and place it in tftp server directory.
- Connect PC with one of LAN ports, power up the router and press
key "Enter" to access U-Boot CLI.
- Use the following commands to update the device to LEDE:
run lfw
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
2.Using httpd mode with Web UI connection and original LEDE image
- Configure PC with static IP 192.168.1.xxx(2-255) and tftp server.
- Connect PC with one of LAN ports,press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
leds flashing.
- Open your browser and enter 192.168.1.1,You will see the upgrade
interface, select "openwrt-ar71xx-generic-xxx-squashfs-
sysupgrade.bin" and click the upgrade button.
- After that the device will reboot and boot to LEDE.
- Wait until all LEDs stops flashing and use the router.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
[cut out of bigger patch, keep swconfig]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/bcm63xx/dts/bcm6338-brcm-bcm96338gw.dts')
0 files changed, 0 insertions, 0 deletions