brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 185 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts b/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts
new file mode 100644
index 0000000000..0354d8eddd
--- /dev/null
+++ b/target/linux/bcm63xx/dts/bcm6368-netgear-dgnd3700-v1.dts
@@ -0,0 +1,185 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear DGND3700v1/DGND3800B";
+	compatible = "netgear,dgnd3700-v1", "brcm,bcm6368";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		wlan {
+			label = "wlan";
+			gpios = <&pinctrl 10 1>;
+			linux,code = <KEY_WLAN>;
+			debounce-interval = <60>;
+		};
+
+		reset {
+			label = "reset";
+			gpios = <&pinctrl 12 1>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 35 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		dsl_green {
+			label = "DGND3700v1_3800B:green:dsl";
+			gpios = <&pinctrl 2 1>;
+		};
+		inet_red {
+			label = "DGND3700v1_3800B:red:inet";
+			gpios = <&pinctrl 4 1>;
+		};
+		inet_green {
+			label = "DGND3700v1_3800B:green:inet";
+			gpios = <&pinctrl 5 1>;
+		};
+		wps_green {
+			label = "DGND3700v1_3800B:green:wps";
+			gpios = <&pinctrl 11 1>;
+		};
+		usbfront_green {
+			label = "DGND3700v1_3800B:green:usb-front";
+			gpios = <&pinctrl 13 1>;
+		};
+		usbback_green {
+			label = "DGND3700v1_3800B:green:usb-back";
+			gpios = <&pinctrl 14 1>;
+		};
+		power_red {
+			label = "DGND3700v1_3800B:red:power";
+			gpios = <&pinctrl 22 1>;
+		};
+		lan_green {
+			label = "DGND3700v1_3800B:green:lan";
+			gpios = <&pinctrl 23 1>;
+		};
+		power_green {
+			label = "DGND3700v1_3800B:green:power";
+			gpios = <&pinctrl 24 1>;
+			default-state = "on";
+		};
+		wifi2g_green {
+			label = "DGND3700v1_3800B:green:wifi2g";
+			gpios = <&pinctrl 26 1>;
+		};
+		wifi5g_blue {
+			label = "DGND3700v1_3800B:blue:wifi5g";
+			gpios = <&pinctrl 27 1>;
+		};
+	};
+};
+
+&pflash {
+	status = "ok";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cfe@0 {
+			label = "CFE";
+			reg = <0x000000 0x020000>;
+			read-only;
+		};
+
+		linux@20000 {
+			label = "linux";
+			reg = <0x020000 0x1e20000>;
+			compatible = "brcm,bcm963xx-imagetag";
+		};
+
+		board_data@1e40000 {
+			label = "board_data";
+			reg = <0x1e40000 0x1a0000>;
+			read-only;
+		};
+
+		nvram@1fe0000 {
+			label = "nvram";
+			reg = <0x1fe0000 0x20000>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pci>;
+};
+
+&lsspi {
+	switch@1 {
+		compatible = "brcm,bcm53115";
+		reg = <1>;
+		spi-max-frequency = <781000>;
+
+		lede,alias = "eth0";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			wan@0 {
+				reg = <0>;
+				label = "wan";
+			};
+
+			lan@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			lan@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			lan@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			lan@4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			cpu@8 {
+				reg = <8>;
+				label = "cpu";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};