brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 175 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/image/lzma-loader/src/loader.c b/target/linux/bcm63xx/image/lzma-loader/src/loader.c
new file mode 100644
index 0000000000..0848ce601f
--- /dev/null
+++ b/target/linux/bcm63xx/image/lzma-loader/src/loader.c
@@ -0,0 +1,175 @@
+/*
+ * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Some parts of this code was based on the OpenWrt specific lzma-loader
+ * for the BCM47xx and ADM5120 based boards:
+ *	Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
+ *	Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
+ *	Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * The image_header structure has been taken from the U-Boot project.
+ *	(C) Copyright 2008 Semihalf
+ *	(C) Copyright 2000-2005
+ *	Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <stddef.h>
+#include <stdint.h>
+
+#include "config.h"
+#include "cache.h"
+#include "printf.h"
+#include "LzmaDecode.h"
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#undef LZMA_DEBUG
+
+#ifdef LZMA_DEBUG
+#  define DBG(f, a...)	printf(f, ## a)
+#else
+#  define DBG(f, a...)	do {} while (0)
+#endif
+
+/* beyond the image end, size not known in advance */
+extern unsigned char workspace[];
+
+
+extern void board_init(void);
+
+static CLzmaDecoderState lzma_state;
+static unsigned char *lzma_data;
+static unsigned long lzma_datasize;
+static unsigned long lzma_outsize;
+static unsigned long kernel_la;
+
+static void halt(void)
+{
+	printf("\nSystem halted!\n");
+	for(;;);
+}
+
+static __inline__ unsigned char lzma_get_byte(void)
+{
+	unsigned char c;
+
+	lzma_datasize--;
+	c = *lzma_data++;
+
+	return c;
+}
+
+static int lzma_init_props(void)
+{
+	unsigned char props[LZMA_PROPERTIES_SIZE];
+	int res;
+	int i;
+
+	/* read lzma properties */
+	for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
+		props[i] = lzma_get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	lzma_outsize = ((SizeT) lzma_get_byte()) +
+		       ((SizeT) lzma_get_byte() << 8) +
+		       ((SizeT) lzma_get_byte() << 16) +
+		       ((SizeT) lzma_get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++)
+		lzma_get_byte();
+
+	res = LzmaDecodeProperties(&lzma_state.Properties, props,
+					LZMA_PROPERTIES_SIZE);
+	return res;
+}
+
+static int lzma_decompress(unsigned char *outStream)
+{
+	SizeT ip, op;
+	int ret;
+
+	lzma_state.Probs = (CProb *) workspace;
+
+	ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
+			 lzma_outsize, &op);
+
+	if (ret != LZMA_RESULT_OK) {
+		int i;
+
+		DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
+		    ret, lzma_data + ip, lzma_outsize, ip, op);
+
+		for (i = 0; i < 16; i++)
+			DBG("%02x ", lzma_data[ip + i]);
+
+		DBG("\n");
+	}
+
+	return ret;
+}
+
+static void lzma_init_data(void)
+{
+	extern unsigned char _lzma_data_start[];
+	extern unsigned char _lzma_data_end[];
+
+	kernel_la = LOADADDR;
+	lzma_data = _lzma_data_start;
+	lzma_datasize = _lzma_data_end - _lzma_data_start;
+}
+
+void loader_main(unsigned long reg_a0, unsigned long reg_a1,
+		 unsigned long reg_a2, unsigned long reg_a3)
+{
+	void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
+			      unsigned long);
+	int res;
+
+	board_init();
+
+	printf("\n\nOpenWrt kernel loader for BCM63XX\n");
+	printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
+	printf("Copyright (C) 2014 Jonas Gorski <jogo@openwrt.org>\n");
+
+	lzma_init_data();
+
+	res = lzma_init_props();
+	if (res != LZMA_RESULT_OK) {
+		printf("Incorrect LZMA stream properties!\n");
+		halt();
+	}
+
+	printf("Decompressing kernel... ");
+
+	res = lzma_decompress((unsigned char *) kernel_la);
+	if (res != LZMA_RESULT_OK) {
+		printf("failed, ");
+		switch (res) {
+		case LZMA_RESULT_DATA_ERROR:
+			printf("data error!\n");
+			break;
+		default:
+			printf("unknown error %d!\n", res);
+		}
+		halt();
+	} else {
+		printf("done!\n");
+	}
+
+	flush_cache(kernel_la, lzma_outsize);
+
+	printf("Starting kernel at %08x...\n\n", kernel_la);
+
+	kernel_entry = (void *) kernel_la;
+	kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
+}