diff options
| author | Roman Kuzmitskii <damex.pp@icloud.com> | 2020-10-04 05:43:41 +0000 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-12-22 19:11:50 +0100 |
| commit | 491ae3357e10be46ff6342cad5d2f820bf2cd9f9 (patch) | |
| tree | 70c69948d42bd961857bd5da4261612b7ace2dae /target/linux/bcm63xx/patches-5.4/391-MIPS-BCM63XX-do-not-register-uart.patch | |
| parent | 817bf0204569ca28121576c13f48186ed7b7c2ae (diff) | |
| download | upstream-491ae3357e10be46ff6342cad5d2f820bf2cd9f9.tar.gz upstream-491ae3357e10be46ff6342cad5d2f820bf2cd9f9.tar.bz2 upstream-491ae3357e10be46ff6342cad5d2f820bf2cd9f9.zip | |
ath79: add support for Ubiquiti airCube AC
The Ubiquiti Network airCube AC is a cube shaped device supporting
2.4 GHz and 5 GHz with internal 2x2 MIMO antennas.
It can be powered with either one of:
- 24v power supply with 3.0mm x 1.0mm barrel plug
- 24v passive PoE on first LAN port
There are four 10/100/1000 Mbps ports (1 * WAN + 3 * LAN).
First LAN port have optional PoE passthrough to the WAN port.
SoC: Qualcomm / Atheros AR9342
RAM: 64 MB DDR2
Flash: 16 MB SPI NOR
Ethernet: 4x 10/100/1000 Mbps (1 WAN + 3 LAN)
LEDS: 1x via a SPI controller (not yet supported)
Buttons: 1x Reset
Serial: 1x (only RX and TX); 115200 baud, 8N1
Missing features:
- LED control is not supported
Physical to internal switch port mapping:
- physical port #1 (poe in) = switchport 2
- physical port #2 = switchport 3
- physical port #3 = switchport 5
- physical port #4 (wan/poe out) = switchport 4
Factory update is tested and is the same as for Ubiquiti AirCube ISP
hence the shared configuration between that devices.
Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
Diffstat (limited to 'target/linux/bcm63xx/patches-5.4/391-MIPS-BCM63XX-do-not-register-uart.patch')
0 files changed, 0 insertions, 0 deletions