bcm63xx: reorganize board patches

This renames board patches to make finding devices easier
and reorders them based on their board.

The devices are grouped based on the board/cpu_id. New device
patches should be numbered based on their group.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 97 insertions, 0 deletions

diff --git a/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch b/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch
new file mode 100644
index 0000000000..99a026f9d5
--- /dev/null
+++ b/target/linux/bcm63xx/patches-5.4/525-board_bcm6328-comtrend-ar-5387un.patch
@@ -0,0 +1,97 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -349,6 +349,78 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct sprom_fixup __initdata ar5387un_fixups[] = {
++	{ .offset = 2, .value = 0x05bb },
++	{ .offset = 65, .value = 0x1204 },
++	{ .offset = 78, .value = 0x0303 },
++	{ .offset = 79, .value = 0x0202 },
++	{ .offset = 80, .value = 0xff02 },
++	{ .offset = 87, .value = 0x0315 },
++	{ .offset = 88, .value = 0x0315 },
++	{ .offset = 96, .value = 0x2048 },
++	{ .offset = 97, .value = 0xff11 },
++	{ .offset = 98, .value = 0x1567 },
++	{ .offset = 99, .value = 0xfb24 },
++	{ .offset = 100, .value = 0x3e3c },
++	{ .offset = 101, .value = 0x4038 },
++	{ .offset = 102, .value = 0xfe7f },
++	{ .offset = 103, .value = 0x1279 },
++	{ .offset = 112, .value = 0x2048 },
++	{ .offset = 113, .value = 0xff03 },
++	{ .offset = 114, .value = 0x154c },
++	{ .offset = 115, .value = 0xfb27 },
++	{ .offset = 116, .value = 0x3e3c },
++	{ .offset = 117, .value = 0x4038 },
++	{ .offset = 118, .value = 0xfe87 },
++	{ .offset = 119, .value = 0x1233 },
++	{ .offset = 203, .value = 0x2226 },
++};
++
++static struct board_info __initdata board_AR5387un = {
++	.name = "96328A-1441N1",
++	.expected_cpu_id = 0x6328,
++
++	.has_pci = 1,
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports = 1,
++
++	.has_enetsw = 1,
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used = 1,
++				.phy_id = 1,
++				.name = "Port 1",
++			},
++			[1] = {
++				.used = 1,
++				.phy_id = 2,
++				.name = "Port 2",
++			},
++			[2] = {
++				.used = 1,
++				.phy_id = 3,
++				.name = "Port 3",
++			},
++			[3] = {
++				.used = 1,
++				.phy_id = 4,
++				.name = "Port 4",
++			},
++		},
++	},
++
++	.use_fallback_sprom = 1,
++	.fallback_sprom = {
++		.type = SPROM_BCM43225,
++		.pci_bus = 1,
++		.pci_dev = 0,
++		.board_fixups = ar5387un_fixups,
++		.num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
++	},
++};
++
+ static struct board_info __initdata board_963281TAN = {
+ 	.name = "963281TAN",
+ 	.expected_cpu_id = 0x6328,
+@@ -822,6 +894,7 @@ static const struct board_info __initcon
+ #endif /* CONFIG_BCM63XX_CPU_6318 */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_AR5387un,
+ 	&board_963281TAN,
+ 	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+@@ -867,6 +940,7 @@ static struct of_device_id const bcm963x
+ 	{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
+ 	{ .compatible = "brcm,bcm963281tan", .data = &board_963281TAN, },
+ 	{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
++	{ .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
+ 	{ .compatible = "d-link,dsl-274xb-f1", .data = &board_dsl_274xb_f1, },
+ #endif /* CONFIG_BCM63XX_CPU_6328 */
+ #ifdef CONFIG_BCM63XX_CPU_6338