diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2021-03-17 18:35:34 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-03-21 22:45:20 +0100 |
| commit | b3ca1f30efd7bb96a22f72b766d302e552265276 (patch) | |
| tree | c0f6085f2486e9433a86a25bea5dd429a506db73 /target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts | |
| parent | fdbdbe8eaaa6aa3acacdcb3ae1308b2a2055fc39 (diff) | |
| download | upstream-b3ca1f30efd7bb96a22f72b766d302e552265276.tar.gz upstream-b3ca1f30efd7bb96a22f72b766d302e552265276.tar.bz2 upstream-b3ca1f30efd7bb96a22f72b766d302e552265276.zip | |
ramips: add support for ELECOM WRC-1750GST2
ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.
Specification:
- SoC : MediaTek MT7621A
- RAM : DDR3 256 MiB (NT5CC128M16JR-EK)
- Flash : SPI-NOR 32 MiB (MX25L25645GMI-08G)
- WLAN : 2.4/5 GHz 3T3R (2x MediaTek MT7615)
- Ethernet : 10/100/1000 Mbps x5
- Switch : MediaTek MT7530 (SoC)
- LEDs/Keys : 4x/6x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J4: 3.3V, GND, TX, RX, from ethernet port side
- 57600n8
- Power : 12 VDC, 1.5 A
Flash instruction using factory image:
1. Boot WRC-1750GST2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing
MAC addresses:
LAN : 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex))
WAN : 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex))
2.4GHz : 04:AB:18:xx:xx:25 (Factory, 0x4 (hex))
5GHz : 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex))
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/bmips/dts/bcm6358-huawei-hg556a-b.dts')
0 files changed, 0 insertions, 0 deletions