brcm2708: move wifi calibration EEPROMs out of base-files

Ship EEPROM blobs for specific supported board only and don't have them
lurking around in our source tree but rather download them from
@github/RPi-Distro/firmware-nonfree upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

1 files changed, 0 insertions, 66 deletions

diff --git a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt b/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt
deleted file mode 100644
index ea4f648a18..0000000000
--- a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-# NVRAM file for BCM943430WLPTH
-# 2.4 GHz, 20 MHz BW mode
-
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0727
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0727
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-boardflags3=0x08000000
-xtalfreq=37400
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=84
-txpwrbckof=6
-cckbw202gpo=0
-legofdmbw202gpo=0x66111111
-mcsbw202gpo=0x77711111
-propbw202gpo=0xdd
-
-# OFDM IIR :
-ofdmdigfilttype=18
-ofdmdigfilttypebe=18
-# PAPD mode:
-papdmode=1
-papdvalidtest=1
-pacalidx2g=42
-papdepsoffset=-22
-papdendidx=58
-
-# LTECX flags
-ltecxmux=0
-ltecxpadnum=0x0102
-ltecxfnsel=0x44
-ltecxgcigpio=0x01
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
-muxenab=0x1
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-
-#VCO freq 326.4MHz
-spurconfig=0x3 
-
-edonthd20l=-75
-edoffthd20ul=-80