diff options
author | Stijn Tintel <stijn@linux-ipv6.be> | 2018-11-10 13:03:18 +0200 |
---|---|---|
committer | Stijn Tintel <stijn@linux-ipv6.be> | 2018-12-18 23:19:21 +0200 |
commit | f5919b65d4c671fd5083838c7a445f319f9a13c8 (patch) | |
tree | 2c791d2a5dea5bbbb0b85f86f74afce2647c0726 /target/linux/brcm2708/patches-4.14/950-0288-config-Add-CONFIG_BATTERY_GAUGE_LTC2941-m.patch | |
parent | 822b4c3b250a254e74407056ccfd5c6aa38da162 (diff) | |
download | upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.gz upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.tar.bz2 upstream-f5919b65d4c671fd5083838c7a445f319f9a13c8.zip |
brcm2708: add kernel 4.14 support
Patch generation process:
- rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable
- git format-patch v4.14.89
Patches skipped during rebase:
- lan78xx: Read MAC address from DT if present
- lan78xx: Enable LEDs and auto-negotiation
- Revert "softirq: Let ksoftirqd do its job"
- sc16is7xx: Fix for multi-channel stall
- lan78xx: Ignore DT MAC address if already valid
- lan78xx: Simple patch to prevent some crashes
- tcp_write_queue_purge clears all the SKBs in the write queue
- Revert "lan78xx: Simple patch to prevent some crashes"
- lan78xx: Connect phy early
- Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro
- Revert "Revert "softirq: Let ksoftirqd do its job""
- ASoC: cs4265: SOC_SINGLE register value error fix
- Revert "ASoC: cs4265: SOC_SINGLE register value error fix"
- Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"
- Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends""
Patches dropped after rebase:
- net: Add non-mainline source for rtl8192cu wlan
- net: Fix rtl8192cu build errors on other platforms
- brcm: adds support for BCM43341 wifi
- brcmfmac: Mute expected startup 'errors'
- ARM64: Fix build break for RTL8187/RTL8192CU wifi
- ARM64: Enable RTL8187/RTL8192CU wifi in build config
- This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator
- brcmfmac: add CLM download support
- brcmfmac: request_firmware_direct is quieter
- Sets the BCDC priority to constant 0
- brcmfmac: Disable ARP offloading when promiscuous
- brcmfmac: Avoid possible out-of-bounds read
- brcmfmac: Delete redundant length check
- net: rtl8192cu: Normalize indentation
- net: rtl8192cu: Fix implicit fallthrough warnings
- Revert "Sets the BCDC priority to constant 0"
- media: cxd2880: Bump to match 4.18.y version
- media: cxd2880-spi: Bump to match 4.18.y version
- Revert "mm: alloc_contig: re-allow CMA to compact FS pages"
- Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages""
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch
- 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch
Make I2C built-in instead of modular as in upstream defconfig; also the
easiest way to get MFD_ARIZONA enabled, which is required by
kmod-sound-soc-rpi-cirrus.
Add missing compatible strings from
4.9/960-add-rasbperrypi-compatible.patch, using upstream names for
compute modules.
Add extra patch to enable the LEDs on lan78xx.
Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y)
Runtime-tested: bcm2708, bcm2710
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.14/950-0288-config-Add-CONFIG_BATTERY_GAUGE_LTC2941-m.patch')
-rw-r--r-- | target/linux/brcm2708/patches-4.14/950-0288-config-Add-CONFIG_BATTERY_GAUGE_LTC2941-m.patch | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/target/linux/brcm2708/patches-4.14/950-0288-config-Add-CONFIG_BATTERY_GAUGE_LTC2941-m.patch b/target/linux/brcm2708/patches-4.14/950-0288-config-Add-CONFIG_BATTERY_GAUGE_LTC2941-m.patch new file mode 100644 index 0000000000..b727c5eb62 --- /dev/null +++ b/target/linux/brcm2708/patches-4.14/950-0288-config-Add-CONFIG_BATTERY_GAUGE_LTC2941-m.patch @@ -0,0 +1,35 @@ +From 83516a5d962a3bb2053334a10060126dfebb5be3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell <phil@raspberrypi.org> +Date: Mon, 30 Apr 2018 15:57:00 +0100 +Subject: [PATCH 288/454] config: Add CONFIG_BATTERY_GAUGE_LTC2941=m + +Support the LTC294x range of I2C-connected battery monitors. + +See: https://github.com/raspberrypi/linux/issues/2537 + +Signed-off-by: Phil Elwell <phil@raspberrypi.org> +--- + arch/arm/configs/bcm2709_defconfig | 1 + + arch/arm/configs/bcmrpi_defconfig | 1 + + 2 files changed, 2 insertions(+) + +--- a/arch/arm/configs/bcm2709_defconfig ++++ b/arch/arm/configs/bcm2709_defconfig +@@ -648,6 +648,7 @@ CONFIG_W1_SLAVE_DS28E04=m + CONFIG_POWER_RESET=y + CONFIG_POWER_RESET_GPIO=y + CONFIG_BATTERY_DS2760=m ++CONFIG_BATTERY_GAUGE_LTC2941=m + CONFIG_HWMON=m + CONFIG_SENSORS_DS1621=m + CONFIG_SENSORS_JC42=m +--- a/arch/arm/configs/bcmrpi_defconfig ++++ b/arch/arm/configs/bcmrpi_defconfig +@@ -641,6 +641,7 @@ CONFIG_W1_SLAVE_DS28E04=m + CONFIG_POWER_RESET=y + CONFIG_POWER_RESET_GPIO=y + CONFIG_BATTERY_DS2760=m ++CONFIG_BATTERY_GAUGE_LTC2941=m + CONFIG_HWMON=m + CONFIG_SENSORS_DS1621=m + CONFIG_SENSORS_JC42=m |