brcm2708: remove linux 4.14 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 72 deletions

diff --git a/target/linux/brcm2708/patches-4.14/950-0324-ov5647-Add-support-for-non-continuous-clock-mode.patch b/target/linux/brcm2708/patches-4.14/950-0324-ov5647-Add-support-for-non-continuous-clock-mode.patch
deleted file mode 100644
index 62de988cb5..0000000000
--- a/target/linux/brcm2708/patches-4.14/950-0324-ov5647-Add-support-for-non-continuous-clock-mode.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From f4d559078cab81209b721a83ffd87a40a6fb52c4 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Fri, 23 Jun 2017 17:58:55 +0100
-Subject: [PATCH 324/454] ov5647: Add support for non-continuous clock mode
-
-The driver was only supporting continuous clock mode
-although this was not stated anywhere.
-Non-continuous clock saves a small amount of power and
-on some SoCs is easier to interface with.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
----
- drivers/media/i2c/ov5647.c | 13 ++++++++++---
- 1 file changed, 10 insertions(+), 3 deletions(-)
-
---- a/drivers/media/i2c/ov5647.c
-+++ b/drivers/media/i2c/ov5647.c
-@@ -86,6 +86,7 @@ struct ov5647 {
- 	int				power_count;
- 	struct clk			*xclk;
- 	struct gpio_desc		*pwdn;
-+	unsigned int			flags;
- };
- 
- static inline struct ov5647 *to_state(struct v4l2_subdev *sd)
-@@ -302,6 +303,7 @@ static int __sensor_init(struct v4l2_sub
- 	int ret;
- 	u8 resetval, rdval;
- 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-+	struct ov5647 *ov5647 = to_state(sd);
- 
- 	ret = ov5647_read(sd, 0x0100, &rdval);
- 	if (ret < 0)
-@@ -329,7 +331,9 @@ static int __sensor_init(struct v4l2_sub
- 			return ret;
- 	}
- 
--	return ov5647_write(sd, 0x4800, 0x04);
-+	return ov5647_write(sd, 0x4800,
-+		    (ov5647->flags & V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK) ?
-+					0x34 : 0x04);
- }
- 
- static int ov5647_sensor_power(struct v4l2_subdev *sd, int on)
-@@ -547,7 +551,7 @@ static const struct v4l2_subdev_internal
- 	.open = ov5647_open,
- };
- 
--static int ov5647_parse_dt(struct device_node *np)
-+static int ov5647_parse_dt(struct device_node *np, struct ov5647 *sensor)
- {
- 	struct v4l2_fwnode_endpoint bus_cfg;
- 	struct device_node *ep;
-@@ -560,6 +564,9 @@ static int ov5647_parse_dt(struct device
- 
- 	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
- 
-+	if (!ret)
-+		sensor->flags = bus_cfg.bus.mipi_csi2.flags;
-+
- 	of_node_put(ep);
- 	return ret;
- }
-@@ -579,7 +586,7 @@ static int ov5647_probe(struct i2c_clien
- 		return -ENOMEM;
- 
- 	if (IS_ENABLED(CONFIG_OF) && np) {
--		ret = ov5647_parse_dt(np);
-+		ret = ov5647_parse_dt(np, sensor);
- 		if (ret) {
- 			dev_err(dev, "DT parsing error: %d\n", ret);
- 			return ret;