brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 500 deletions

diff --git a/target/linux/brcm2708/patches-4.19/950-0425-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch b/target/linux/brcm2708/patches-4.19/950-0425-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch
deleted file mode 100644
index 97d69c695b..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0425-ASoC-decommissioning-driver-for-3Dlab-Nano-soundcard.patch
+++ /dev/null
@@ -1,500 +0,0 @@
-From 3150326498ba9388b85e5af2c8fcfeafc46eeaad Mon Sep 17 00:00:00 2001
-From: GT <dev@3d-lab-av.com>
-Date: Sat, 6 Apr 2019 21:16:39 +0100
-Subject: [PATCH] ASoC: decommissioning driver for 3Dlab Nano soundcard
-
----
- .../overlays/3dlab-nano-player-overlay.dts    |  32 --
- arch/arm/boot/dts/overlays/Makefile           |   1 -
- arch/arm/boot/dts/overlays/README             |   6 -
- sound/soc/bcm/3dlab-nano-player.c             | 370 ------------------
- sound/soc/bcm/Kconfig                         |   6 -
- sound/soc/bcm/Makefile                        |   6 +-
- 8 files changed, 2 insertions(+), 421 deletions(-)
- delete mode 100644 arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts
- delete mode 100644 sound/soc/bcm/3dlab-nano-player.c
-
---- a/arch/arm/boot/dts/overlays/3dlab-nano-player-overlay.dts
-+++ /dev/null
-@@ -1,32 +0,0 @@
--// Definitions for 3Dlab Nano Player
--/dts-v1/;
--/plugin/;
--
--/ {
--	compatible = "brcm,bcm2708";
--
--	fragment@0 {
--		target = <&i2s>;
--		__overlay__ {
--			status = "okay";
--		};
--	};
--
--	fragment@1 {
--		target = <&i2c>;
--		__overlay__ {
--			#address-cells = <1>;
--			#size-cells = <0>;
--			status = "okay";
--
--			nano-player@41 {
--				compatible = "3dlab,nano-player";
--				reg = <0x41>;
--				i2s-controller = <&i2s>;
--				status = "okay";
--			};
--		};
--	};
--};
--
--// EOF
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -1,7 +1,6 @@
- # Overlays for the Raspberry Pi platform
- 
- dtbo-$(CONFIG_ARCH_BCM2835) += \
--	3dlab-nano-player.dtbo \
- 	adau1977-adc.dtbo \
- 	adau7002-simple.dtbo \
- 	ads1015.dtbo \
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -205,12 +205,6 @@ Params:
-         and the other i2c baudrate parameters.
- 
- 
--Name:   3dlab-nano-player
--Info:   Configures the 3Dlab Nano Player
--Load:   dtoverlay=3dlab-nano-player
--Params: <None>
--
--
- Name:   adau1977-adc
- Info:   Overlay for activation of ADAU1977 ADC codec over I2C for control
-         and I2S for data.
---- a/sound/soc/bcm/3dlab-nano-player.c
-+++ /dev/null
-@@ -1,370 +0,0 @@
--/*
-- * 3Dlab Nano Player ALSA SoC Audio driver.
-- *
-- * Copyright (C) 2018 3Dlab.
-- *
-- * Author: GT <dev@3d-lab-av.com>
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License
-- * version 2 as published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful, but
-- * WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-- * General Public License for more details.
-- */
--
--#include <linux/module.h>
--#include <linux/i2c.h>
--#include <sound/soc.h>
--#include <sound/pcm.h>
--#include <sound/pcm_params.h>
--#include <sound/control.h>
--
--#define NANO_ID		0x00
--#define NANO_VER	0x01
--#define NANO_CFG	0x02
--#define NANO_STATUS	0x03
--#define NANO_SPI_ADDR	0x04
--#define NANO_SPI_DATA	0x05
--
--#define NANO_ID_VAL	0x3D
--#define NANO_CFG_OFF	0x00
--#define NANO_CFG_MULT1	0
--#define NANO_CFG_MULT2	1
--#define NANO_CFG_MULT4	2
--#define NANO_CFG_MULT8	3
--#define NANO_CFG_MULT16	4
--#define NANO_CFG_CLK22	0
--#define NANO_CFG_CLK24	BIT(3)
--#define NANO_CFG_DSD	BIT(4)
--#define NANO_CFG_ENA	BIT(5)
--#define NANO_CFG_BLINK	BIT(6)
--#define NANO_STATUS_P1  BIT(0)
--#define NANO_STATUS_P2  BIT(1)
--#define NANO_STATUS_FLG BIT(2)
--#define NANO_STATUS_CLK BIT(3)
--#define NANO_SPI_READ	0
--#define NANO_SPI_WRITE	BIT(5)
--
--#define NANO_DAC_CTRL1	0x00
--#define NANO_DAC_CTRL2	0x01
--#define NANO_DAC_CTRL3	0x02
--#define NANO_DAC_LATT	0x03
--#define NANO_DAC_RATT	0x04
--
--#define NANO_CTRL2_VAL	0x22
--
--static int nano_player_spi_write(struct regmap *map,
--				 unsigned int reg, unsigned int val)
--{
--	/* indirect register access */
--	regmap_write(map, NANO_SPI_DATA, val);
--	regmap_write(map, NANO_SPI_ADDR, reg | NANO_SPI_WRITE);
--	return 0;
--}
--
--static int nano_player_ctrl_info(struct snd_kcontrol *kcontrol,
--				 struct snd_ctl_elem_info *uinfo)
--{
--	/* describe control element */
--	if (strstr(kcontrol->id.name, "Volume")) {
--		uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
--		uinfo->count = 1;
--		uinfo->value.integer.min = 0;
--		uinfo->value.integer.max = 100;
--	} else {
--		uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
--		uinfo->count = 1;
--		uinfo->value.integer.min = 0;
--		uinfo->value.integer.max = 1;
--	}
--
--	return 0;
--}
--
--static int nano_player_ctrl_put(struct snd_kcontrol *kcontrol,
--				struct snd_ctl_elem_value *ucontrol)
--{
--	/* program control value to hardware */
--	struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
--	struct regmap *regmap = snd_soc_card_get_drvdata(card);
--
--	if (strstr(kcontrol->id.name, "Volume")) {
--		unsigned int vol = ucontrol->value.integer.value[0];
--		unsigned int att = 255 - (2 * (100 - vol));
--
--		nano_player_spi_write(regmap, NANO_DAC_LATT, att);
--		nano_player_spi_write(regmap, NANO_DAC_RATT, att);
--		kcontrol->private_value = vol;
--	} else {
--		unsigned int mute = ucontrol->value.integer.value[0];
--		unsigned int reg = NANO_CTRL2_VAL | mute;
--
--		nano_player_spi_write(regmap, NANO_DAC_CTRL2, reg);
--		kcontrol->private_value = mute;
--	}
--	return 0;
--}
--
--static int nano_player_ctrl_get(struct snd_kcontrol *kcontrol,
--				struct snd_ctl_elem_value *ucontrol)
--{
--	/* return last programmed value */
--	ucontrol->value.integer.value[0] = kcontrol->private_value;
--	return 0;
--}
--
--#define SOC_NANO_PLAYER_CTRL(xname) \
--{	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
--	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE, \
--	.info = nano_player_ctrl_info, \
--	.put = nano_player_ctrl_put, \
--	.get = nano_player_ctrl_get }
--
--static const struct snd_kcontrol_new nano_player_controls[] = {
--	SOC_NANO_PLAYER_CTRL("Master Playback Volume"),
--	SOC_NANO_PLAYER_CTRL("Master Playback Switch"),
--};
--
--static const unsigned int nano_player_rates[] = {
--	44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000,
--	705600, 768000 /* only possible with fast clocks */
--};
--
--static struct snd_pcm_hw_constraint_list nano_player_constraint_rates = {
--	.list	= nano_player_rates,
--	.count	= ARRAY_SIZE(nano_player_rates),
--};
--
--static int nano_player_init(struct snd_soc_pcm_runtime *rtd)
--{
--	struct snd_soc_card *card = rtd->card;
--	struct regmap *regmap = snd_soc_card_get_drvdata(card);
--	struct snd_soc_pcm_stream *cpu = &rtd->cpu_dai->driver->playback;
--	struct snd_soc_pcm_stream *codec = &rtd->codec_dai->driver->playback;
--	unsigned int sample_bits = 32;
--	unsigned int val;
--
--	/* configure cpu dai */
--	cpu->formats |= SNDRV_PCM_FMTBIT_DSD_U32_LE;
--	cpu->rate_max = 768000;
--
--	/* configure dummy codec dai */
--	codec->rate_min = 44100;
--	codec->rates = SNDRV_PCM_RATE_KNOT;
--	codec->formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_DSD_U32_LE;
--
--	/* configure max supported rate */
--	regmap_read(regmap, NANO_STATUS, &val);
--	if (val & NANO_STATUS_CLK) {
--		dev_notice(card->dev, "Board with fast clocks installed\n");
--		codec->rate_max = 768000;
--	} else {
--		dev_notice(card->dev, "Board with normal clocks installed\n");
--		codec->rate_max = 384000;
--	}
--
--	/* frame length enforced by hardware */
--	return snd_soc_dai_set_bclk_ratio(rtd->cpu_dai, sample_bits * 2);
--}
--
--static int nano_player_startup(struct snd_pcm_substream *substream)
--{
--	return snd_pcm_hw_constraint_list(substream->runtime, 0,
--					  SNDRV_PCM_HW_PARAM_RATE,
--					  &nano_player_constraint_rates);
--}
--
--static int nano_player_hw_params(struct snd_pcm_substream *substream,
--				 struct snd_pcm_hw_params *params)
--{
--	struct snd_soc_pcm_runtime *rtd = substream->private_data;
--	struct snd_soc_card *card = rtd->card;
--	struct regmap *regmap = snd_soc_card_get_drvdata(card);
--	unsigned int config = NANO_CFG_ENA;
--	struct snd_mask *fmt;
--
--	/* configure PCM or DSD */
--	fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
--	if (snd_mask_test(fmt, SNDRV_PCM_FORMAT_DSD_U32_LE)) {
--		/* embed DSD in PCM data */
--		snd_mask_none(fmt);
--		snd_mask_set(fmt, SNDRV_PCM_FORMAT_S32_LE);
--		/* enable DSD mode */
--		config |= NANO_CFG_DSD;
--	}
--
--	/* configure clocks */
--	switch (params_rate(params)) {
--	case 44100:
--		config |= NANO_CFG_MULT1 | NANO_CFG_CLK22;
--		break;
--	case 88200:
--		config |= NANO_CFG_MULT2 | NANO_CFG_CLK22;
--		break;
--	case 176400:
--		config |= NANO_CFG_MULT4 | NANO_CFG_CLK22;
--		break;
--	case 352800:
--		config |= NANO_CFG_MULT8 | NANO_CFG_CLK22;
--		break;
--	case 705600:
--		config |= NANO_CFG_MULT16 | NANO_CFG_CLK22;
--		break;
--	case 48000:
--		config |= NANO_CFG_MULT1 | NANO_CFG_CLK24;
--		break;
--	case 96000:
--		config |= NANO_CFG_MULT2 | NANO_CFG_CLK24;
--		break;
--	case 192000:
--		config |= NANO_CFG_MULT4 | NANO_CFG_CLK24;
--		break;
--	case 384000:
--		config |= NANO_CFG_MULT8 | NANO_CFG_CLK24;
--		break;
--	case 768000:
--		config |= NANO_CFG_MULT16 | NANO_CFG_CLK24;
--		break;
--	default:
--		return -EINVAL;
--	}
--
--	dev_dbg(card->dev, "Send CFG register 0x%02X\n", config);
--	return regmap_write(regmap, NANO_CFG, config);
--}
--
--static struct snd_soc_ops nano_player_ops = {
--	.startup	= nano_player_startup,
--	.hw_params	= nano_player_hw_params,
--};
--
--static struct snd_soc_dai_link nano_player_link = {
--	.name		= "3Dlab Nano Player",
--	.stream_name	= "3Dlab Nano Player HiFi",
--	.platform_name	= "bcm2708-i2s.0",
--	.cpu_dai_name	= "bcm2708-i2s.0",
--	.codec_name	= "snd-soc-dummy",
--	.codec_dai_name	= "snd-soc-dummy-dai",
--	.dai_fmt	= SND_SOC_DAIFMT_I2S |
--			  SND_SOC_DAIFMT_CONT |
--			  SND_SOC_DAIFMT_NB_NF |
--			  SND_SOC_DAIFMT_CBM_CFM,
--	.init		= nano_player_init,
--	.ops		= &nano_player_ops,
--};
--
--static const struct regmap_config nano_player_regmap = {
--	.reg_bits	= 8,
--	.val_bits	= 8,
--	.max_register	= 128,
--	.cache_type	= REGCACHE_RBTREE,
--};
--
--static int nano_player_card_probe(struct snd_soc_card *card)
--{
--	struct regmap *regmap = snd_soc_card_get_drvdata(card);
--	unsigned int val;
--
--	/* check hardware integrity */
--	regmap_read(regmap, NANO_ID, &val);
--	if (val != NANO_ID_VAL) {
--		dev_err(card->dev, "Invalid ID register 0x%02X\n", val);
--		return -ENODEV;
--	}
--
--	/* report version to the user */
--	regmap_read(regmap, NANO_VER, &val);
--	dev_notice(card->dev, "Started 3Dlab Nano Player driver (v%d)\n", val);
--
--	/* enable internal audio bus and blink status LED */
--	return regmap_write(regmap, NANO_CFG, NANO_CFG_ENA | NANO_CFG_BLINK);
--}
--
--static int nano_player_card_remove(struct snd_soc_card *card)
--{
--	/* disable internal audio bus */
--	struct regmap *regmap = snd_soc_card_get_drvdata(card);
--
--	return regmap_write(regmap, NANO_CFG, NANO_CFG_OFF);
--}
--
--static struct snd_soc_card nano_player_card = {
--	.name		= "3Dlab_Nano_Player",
--	.owner		= THIS_MODULE,
--	.dai_link	= &nano_player_link,
--	.num_links	= 1,
--	.controls	= nano_player_controls,
--	.num_controls	= ARRAY_SIZE(nano_player_controls),
--	.probe		= nano_player_card_probe,
--	.remove		= nano_player_card_remove,
--};
--
--static int nano_player_i2c_probe(struct i2c_client *i2c,
--				 const struct i2c_device_id *id)
--{
--	struct regmap *regmap;
--	int ret;
--
--	regmap = devm_regmap_init_i2c(i2c, &nano_player_regmap);
--	if (IS_ERR(regmap)) {
--		ret = PTR_ERR(regmap);
--		dev_err(&i2c->dev, "Failed to init regmap %d\n", ret);
--		return ret;
--	}
--
--	if (i2c->dev.of_node) {
--		struct snd_soc_dai_link *dai = &nano_player_link;
--		struct device_node *node;
--
--		/* cpu handle configured by device tree */
--		node = of_parse_phandle(i2c->dev.of_node, "i2s-controller", 0);
--		if (node) {
--			dai->platform_name = NULL;
--			dai->platform_of_node = node;
--			dai->cpu_dai_name = NULL;
--			dai->cpu_of_node = node;
--		}
--	}
--
--	nano_player_card.dev = &i2c->dev;
--	snd_soc_card_set_drvdata(&nano_player_card, regmap);
--	ret = devm_snd_soc_register_card(&i2c->dev, &nano_player_card);
--
--	if (ret && ret != -EPROBE_DEFER)
--		dev_err(&i2c->dev, "Failed to register card %d\n", ret);
--
--	return ret;
--}
--
--static const struct of_device_id nano_player_of_match[] = {
--	{ .compatible = "3dlab,nano-player", },
--	{ }
--};
--MODULE_DEVICE_TABLE(of, nano_player_of_match);
--
--static const struct i2c_device_id nano_player_i2c_id[] = {
--	{ "nano-player", 0 },
--	{ }
--};
--MODULE_DEVICE_TABLE(i2c, nano_player_i2c_id);
--
--static struct i2c_driver nano_player_i2c_driver = {
--	.probe		= nano_player_i2c_probe,
--	.id_table	= nano_player_i2c_id,
--	.driver		= {
--		.name		= "nano-player",
--		.owner		= THIS_MODULE,
--		.of_match_table	= nano_player_of_match,
--	},
--};
--
--module_i2c_driver(nano_player_i2c_driver);
--
--MODULE_DESCRIPTION("ASoC 3Dlab Nano Player driver");
--MODULE_AUTHOR("GT <dev@3d-lab-av.com>");
--MODULE_LICENSE("GPL v2");
--
--/* EOF */
---- a/sound/soc/bcm/Kconfig
-+++ b/sound/soc/bcm/Kconfig
-@@ -17,12 +17,6 @@ config SND_SOC_CYGNUS
- 
- 	  If you don't know what to do here, say N.
- 
--config SND_BCM2708_SOC_3DLAB_NANO_PLAYER
--	tristate "Support for 3Dlab Nano Player"
--	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
--	help
--	  Say Y or M if you want to add support for 3Dlab Nano Player.
--
- config SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD
- 	tristate "Support for Google voiceHAT soundcard"
- 	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
---- a/sound/soc/bcm/Makefile
-+++ b/sound/soc/bcm/Makefile
-@@ -12,7 +12,6 @@ obj-$(CONFIG_SND_SOC_CYGNUS) += snd-soc-
- snd-soc-googlevoicehat-codec-objs := googlevoicehat-codec.o
- 
- # BCM2708 Machine Support
--snd-soc-3dlab-nano-player-objs := 3dlab-nano-player.o
- snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o
- snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o
- snd-soc-justboom-dac-objs := justboom-dac.o
-@@ -20,7 +19,7 @@ snd-soc-rpi-cirrus-objs := rpi-cirrus.o
- snd-soc-rpi-proto-objs := rpi-proto.o
- snd-soc-iqaudio-codec-objs := iqaudio-codec.o
- snd-soc-iqaudio-dac-objs := iqaudio-dac.o
-- snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o
-+snd-soc-i-sabre-q2m-objs := i-sabre-q2m.o
- snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
- snd-soc-audioinjector-octo-soundcard-objs := audioinjector-octo-soundcard.o
- snd-soc-audiosense-pi-objs := audiosense-pi.o
-@@ -36,7 +35,6 @@ snd-soc-fe-pi-audio-objs := fe-pi-audio.
- snd-soc-rpi-simple-soundcard-objs := rpi-simple-soundcard.o
- snd-soc-rpi-wm8804-soundcard-objs := rpi-wm8804-soundcard.o
- 
--obj-$(CONFIG_SND_BCM2708_SOC_3DLAB_NANO_PLAYER) += snd-soc-3dlab-nano-player.o
- obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD)  += snd-soc-googlevoicehat-codec.o
- obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o
- obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o
-@@ -45,7 +43,7 @@ obj-$(CONFIG_SND_BCM2708_SOC_RPI_CIRRUS)
- obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
- obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_CODEC) += snd-soc-iqaudio-codec.o
- obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
-- obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o
-+obj-$(CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M) += snd-soc-i-sabre-q2m.o
- obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
- obj-$(CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD) += snd-soc-audioinjector-octo-soundcard.o
- obj-$(CONFIG_SND_AUDIOSENSE_PI) += snd-soc-audiosense-pi.o