aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-08 21:58:55 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-14 14:10:51 +0100
commit7d7aa2fd924c27829ec25f825481554dd81bce97 (patch)
tree658b87b89331670266163e522ea5fb52535633cb /target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch
parente7bfda2c243e66a75ff966ba04c28b1590b5d24c (diff)
downloadupstream-7d7aa2fd924c27829ec25f825481554dd81bce97.tar.gz
upstream-7d7aa2fd924c27829ec25f825481554dd81bce97.tar.bz2
upstream-7d7aa2fd924c27829ec25f825481554dd81bce97.zip
brcm2708: rename target to bcm27xx
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
Diffstat (limited to 'target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch')
-rw-r--r--target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch163
1 files changed, 0 insertions, 163 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch b/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch
deleted file mode 100644
index 82e126e8ff..0000000000
--- a/target/linux/brcm2708/patches-4.19/950-0713-ARM-dts-bcm283x-Enable-HDMI-at-board-level.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From a3cbeaaee57b7bda4e921bb2cff649fb56c0292d Mon Sep 17 00:00:00 2001
-From: Stefan Wahren <wahrenst@gmx.net>
-Date: Tue, 17 Sep 2019 19:31:19 +0200
-Subject: [PATCH] ARM: dts: bcm283x: Enable HDMI at board level
-
-commit 60c833d5664e1b3f71c4471233469790adf505ca upstream.
-
-There might be headless setups of the Compute Module without HDMI,
-so better enable HDMI at board level. Btw this allows moving HDMI
-base definition into upcoming bcm2835-common.dtsi.
-
-Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
-Reviewed-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-a.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-b.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 ++
- arch/arm/boot/dts/bcm2835-rpi.dtsi | 5 -----
- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 ++
- arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 ++
- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 ++
- 12 files changed, 22 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
-@@ -100,6 +100,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2835-rpi-a.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
-@@ -95,6 +95,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-@@ -102,6 +102,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-@@ -95,6 +95,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-@@ -90,6 +90,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
-@@ -79,6 +79,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &sdhost {
---- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
-@@ -113,6 +113,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &sdhci {
---- a/arch/arm/boot/dts/bcm2835-rpi-zero.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
-@@ -103,6 +103,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &sdhost {
---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-@@ -92,11 +92,6 @@
- power-domains = <&power RPI_POWER_DOMAIN_V3D>;
- };
-
--&hdmi {
-- power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-- status = "okay";
--};
--
- &vec {
- power-domains = <&power RPI_POWER_DOMAIN_VEC>;
- status = "okay";
---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-@@ -40,6 +40,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
-@@ -54,6 +54,8 @@
-
- &hdmi {
- hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- &pwm {
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-@@ -56,6 +56,8 @@
-
- &hdmi {
- hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
-+ power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
-+ status = "okay";
- };
-
- /* uart0 communicates with the BT module */