brcm63xx: rename target to bcm63xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 250 deletions

diff --git a/target/linux/brcm63xx/dts/bcm63268.dtsi b/target/linux/brcm63xx/dts/bcm63268.dtsi
deleted file mode 100644
index 1b4b3e6178..0000000000
--- a/target/linux/brcm63xx/dts/bcm63268.dtsi
+++ /dev/null
@@ -1,250 +0,0 @@
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "brcm,bcm63268";
-
-	aliases {
-		pinctrl = &pinctrl;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		spi0 = &lsspi;
-		spi1 = &hsspi;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "brcm,bmips4350", "mips,mips4Kc";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "brcm,bmips4350", "mips,mips4Kc";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
-	cpu_intc: interrupt-controller {
-		#address-cells = <0>;
-		compatible = "mti,cpu-interrupt-controller";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-	};
-
-	memory { device_type = "memory"; reg = <0 0>; };
-
-	ubus@10000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-		interrupt-parent = <&periph_intc>;
-
-		ext_intc: interrupt-controller@10000018 {
-			compatible = "brcm,bcm6345-ext-intc";
-			reg = <0x10000018 0x4>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			interrupts = <44>, <45>, <46>, <47>;
-		};
-
-		periph_intc: interrupt-controller@10000020 {
-			compatible = "brcm,bcm6345-l1-intc";
-			reg = <0x10000020 0x20>,
-			      <0x10000040 0x20>;
-
-			interrupt-controller;
-			#interrupt-cells = <1>;
-
-			interrupt-parent = <&cpu_intc>;
-			interrupts = <2>, <3>;
-		};
-
-		pinctrl: pin-controller@100000c0 {
-			compatible = "brcm,bcm63268-pinctrl";
-			reg = <0x100000c0 0x8>,
-			      <0x100000c8 0x8>,
-			      <0x100000d0 0x4>,
-			      <0x100000d8 0x4>,
-			      <0x100000dc 0x4>,
-			      <0x100000f8 0x4>;
-			reg-names = "dirout", "dat", "led", "mode",
-				    "ctrl", "basemode";
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-parent = <&periph_intc>;
-			interrupts = <0 0>, <1 0>, <2 0>, <3 0>;
-			interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35";
-
-			pinctrl_serial_led: serial_led {
-				pinctrl_serial_led_clk: serial_led_clk {
-					function = "serial_led_clk";
-					pins = "gpio0";
-				};
-
-				pinctrl_serial_led_data: serial_led_data {
-					function = "serial_led_data";
-					pins = "gpio1";
-				};
-			};
-
-			pinctrl_hsspi_cs4: hsspi_cs4 {
-				function = "hsspi_cs4";
-				pins = "gpio16";
-			};
-
-			pinctrl_hsspi_cs5: hsspi_cs5 {
-				function = "hsspi_cs5";
-				pins = "gpio17";
-			};
-
-			pinctrl_hsspi_cs6: hsspi_cs6 {
-				function = "hsspi_cs6";
-				pins = "gpio8";
-			};
-
-			pinctrl_hsspi_cs7: hsspi_cs7 {
-				function = "hsspi_cs7";
-				pins = "gpio9";
-			};
-
-			pinctrl_adsl_spi: adsl_spi {
-				pinctrl_adsl_spi_miso: adsl_spi_miso {
-					function = "adsl_spi_miso";
-					pins = "gpio18";
-				};
-
-				pinctrl_adsl_spi_mosi: adsl_spi_mosi {
-					function = "adsl_spi_mosi";
-					pins = "gpio19";
-				};
-			};
-
-			pinctrl_vreq_clk: vreq_clk {
-				function = "vreq_clk";
-				pins = "gpio22";
-			};
-
-			pinctrl_pcie_clkreq_b: pcie_clkreq_b {
-				function = "pcie_clkreq_b";
-				pins = "gpio23";
-			};
-
-			pinctrl_robosw_led_clk: robosw_led_clk {
-				function = "robosw_led_clk";
-				pins = "gpio30";
-			};
-
-			pinctrl_robosw_led_data: robosw_led_data {
-				function = "robosw_led_data";
-				pins = "gpio31";
-			};
-
-			pinctrl_nand: nand {
-				function = "nand";
-				group = "nand_grp";
-			};
-
-			pinctrl_gpio35_alt: gpio35_alt {
-				function = "gpio35_alt";
-				pin = "gpio35";
-			};
-
-			pinctrl_dectpd: dectpd {
-				function = "dectpd";
-				group = "dectpd_grp";
-			};
-
-			pinctrl_vdsl_phy_override_0: vdsl_phy_override_0 {
-				function = "vdsl_phy_override_0";
-				group = "vdsl_phy_override_0_grp";
-			};
-
-			pinctrl_vdsl_phy_override_1: vdsl_phy_override_1 {
-				function = "vdsl_phy_override_1";
-				group = "vdsl_phy_override_1_grp";
-			};
-
-			pinctrl_vdsl_phy_override_2: vdsl_phy_override_2 {
-				function = "vdsl_phy_override_2";
-				group = "vdsl_phy_override_2_grp";
-			};
-
-			pinctrl_vdsl_phy_override_3: vdsl_phy_override_3 {
-				function = "vdsl_phy_override_3";
-				group = "vdsl_phy_override_3_grp";
-			};
-
-			pinctrl_dsl_gpio8: dsl_gpio8 {
-				function = "dsl_gpio8";
-				group = "dsl_gpio8";
-			};
-
-			pinctrl_dsl_gpio9: dsl_gpio9 {
-				function = "dsl_gpio9";
-				group = "dsl_gpio9";
-			};
-		};
-
-		uart0: serial@10000180 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x10000180 0x18>;
-
-			interrupt-parent = <&periph_intc>;
-			interrupts = <5>;
-
-			/* clocks = <&periph_clk>; */
-			/* clock-names = "refclk"; */
-
-			status = "disabled";
-		};
-
-		uart1: serial@100001a0 {
-			compatible = "brcm,bcm6345-uart";
-			reg = <0x100001a0 0x18>;
-
-			interrupt-parent = <&periph_intc>;
-			interrupts = <34>;
-
-			/* clocks = <&periph_clk>; */
-			/* clock-names = "refclk"; */
-
-			status = "disabled";
-		};
-
-		lsspi: spi@10000800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6358-spi";
-			reg = <0x10000800 0x70c>;
-			interrupts = <80>;
-			/* clocks = <&clkctl 15>; */
-		};
-
-		hsspi: spi@10001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6328-hsspi";
-			reg = <0x10001000 0x600>;
-			interrupts = <6>;
-			/* clocks = <&clkctl 16>; */
-		};
-
-		leds: led-controller@10001900 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "brcm,bcm6328-leds";
-			reg = <0x10001900 0x24>;
-			status = "disabled";
-		};
-	};
-};