diff options
| author | David Bauer <mail@david-bauer.net> | 2019-01-01 19:17:23 +0100 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-01-05 21:55:22 +0100 |
| commit | c8115167f946be85f812f3c94d6294b67ac8944c (patch) | |
| tree | 5eecd280d999a0081af4bd015f980a933147db26 /target/linux/brcm63xx/patches-4.9/321-irqchip-add-support-for-bcm6345-style-external-inter.patch | |
| parent | 8d68be8057d6c689025cc236d20b96b77a6ccf30 (diff) | |
| download | upstream-c8115167f946be85f812f3c94d6294b67ac8944c.tar.gz upstream-c8115167f946be85f812f3c94d6294b67ac8944c.tar.bz2 upstream-c8115167f946be85f812f3c94d6294b67ac8944c.zip | |
ath79: add support for devolo WiFi pro 1200i
Hardware
--------
CPU: Qualcomm Atheros QCA9558
RAM: 128M DDR2
FLASH: 16MiB
ETH: 1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN: 1x Reset
LED: 1x LED blue
1x LED red
BEEP: 1x GPIO attached piezo beeper
UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad)
Header is located next to reset-button
Installation
------------
Make sure you set a password for the root user as prompted on first
setup!
1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.
2. Install OpenWRT with
> sysupgrade -n -F /tmp/<openwrt-image-name>
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/brcm63xx/patches-4.9/321-irqchip-add-support-for-bcm6345-style-external-inter.patch')
0 files changed, 0 insertions, 0 deletions