kernel: bring ssb in sync with upstream (as of current wireless-testing)

SVN-Revision: 21269

1 files changed, 530 insertions, 0 deletions

diff --git a/target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch
new file mode 100644
index 0000000000..ce2c487bff
--- /dev/null
+++ b/target/linux/generic-2.6/patches-2.6.34/975-ssb_update.patch
@@ -0,0 +1,530 @@
+--- a/drivers/ssb/driver_chipcommon.c
++++ b/drivers/ssb/driver_chipcommon.c
+@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip
+ {
+ 	if (!cc->dev)
+ 		return; /* We don't have a ChipCommon */
++	if (cc->dev->id.revision >= 11)
++		cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT);
+ 	ssb_pmu_init(cc);
+ 	chipco_powercontrol_init(cc);
+ 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
+@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c
+ {
+ 	return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value);
+ }
++EXPORT_SYMBOL(ssb_chipco_gpio_control);
+ 
+ u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value)
+ {
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -834,6 +834,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+ 	if (!err) {
+ 		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
+ 			   "PCI device %s\n", dev_name(&host_pci->dev));
++	} else {
++		ssb_printk(KERN_ERR PFX "Failed to register PCI version"
++			   " of SSB with error %d\n", err);
+ 	}
+ 
+ 	return err;
+--- a/drivers/ssb/pci.c
++++ b/drivers/ssb/pci.c
+@@ -168,7 +168,7 @@ err_pci:
+ }
+ 
+ /* Get the word-offset for a SSB_SPROM_XXX define. */
+-#define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
++#define SPOFF(offset)	((offset) / sizeof(u16))
+ /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
+ #define SPEX16(_outvar, _offset, _mask, _shift)	\
+ 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
+@@ -254,7 +254,7 @@ static int sprom_do_read(struct ssb_bus 
+ 	int i;
+ 
+ 	for (i = 0; i < bus->sprom_size; i++)
+-		sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
++		sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2));
+ 
+ 	return 0;
+ }
+@@ -285,7 +285,7 @@ static int sprom_do_write(struct ssb_bus
+ 			ssb_printk("75%%");
+ 		else if (i % 2)
+ 			ssb_printk(".");
+-		writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2));
++		writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2));
+ 		mmiowb();
+ 		msleep(20);
+ 	}
+@@ -621,6 +621,14 @@ static int ssb_pci_sprom_get(struct ssb_
+ 	int err = -ENOMEM;
+ 	u16 *buf;
+ 
++	if (!ssb_is_sprom_available(bus)) {
++		ssb_printk(KERN_ERR PFX "No SPROM available!\n");
++		return -ENODEV;
++	}
++
++	bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ?
++		SSB_SPROM_BASE1 : SSB_SPROM_BASE31;
++
+ 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
+ 	if (!buf)
+ 		goto out;
+--- a/drivers/ssb/sprom.c
++++ b/drivers/ssb/sprom.c
+@@ -176,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback
+ {
+ 	return fallback_sprom;
+ }
++
++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */
++bool ssb_is_sprom_available(struct ssb_bus *bus)
++{
++	/* status register only exists on chipcomon rev >= 11 and we need check
++	   for >= 31 only */
++	/* this routine differs from specs as we do not access SPROM directly
++	   on PCMCIA */
++	if (bus->bustype == SSB_BUSTYPE_PCI &&
++	    bus->chipco.dev->id.revision >= 31)
++		return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
++
++	return true;
++}
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -305,6 +305,7 @@ struct ssb_bus {
+ 	/* ID information about the Chip. */
+ 	u16 chip_id;
+ 	u16 chip_rev;
++	u16 sprom_offset;
+ 	u16 sprom_size;		/* number of words in sprom */
+ 	u8 chip_package;
+ 
+@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru
+ 
+ extern void ssb_bus_unregister(struct ssb_bus *bus);
+ 
++/* Does the device have an SPROM? */
++extern bool ssb_is_sprom_available(struct ssb_bus *bus);
++
+ /* Set a fallback SPROM.
+  * See kdoc at the function definition for complete documentation. */
+ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom);
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -53,6 +53,7 @@
+ #define  SSB_CHIPCO_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+ #define  SSB_CHIPCO_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+ #define  SSB_CHIPCO_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
++#define  SSB_CHIPCO_CAP_SPROM		0x40000000	/* SPROM present */
+ #define SSB_CHIPCO_CORECTL		0x0008
+ #define  SSB_CHIPCO_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+ #define	 SSB_CHIPCO_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+@@ -385,6 +386,7 @@
+ 
+ 
+ /** Chip specific Chip-Status register contents. */
++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS	0x00000040 /* SPROM present */
+ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL	0x00000003
+ #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL		0 /* OTP is powered up, use def. CIS, no SPROM */
+ #define SSB_CHIPCO_CHST_4325_SPROM_SEL		1 /* OTP is powered up, SPROM is present */
+@@ -398,6 +400,18 @@
+ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT	4
+ #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 		0x00000200 /* 1 for 2b, 0 for to 2a */
+ 
++/** Macros to determine SPROM presence based on Chip-Status register. */
++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \
++	((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL)
++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \
++	(status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS)
++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \
++	(((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \
++	 ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \
++		SSB_CHIPCO_CHST_4325_OTP_SEL))
++
+ 
+ 
+ /** Clockcontrol masks and values **/
+@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu {
+ struct ssb_chipcommon {
+ 	struct ssb_device *dev;
+ 	u32 capabilities;
++	u32 status;
+ 	/* Fast Powerup Delay constant */
+ 	u16 fast_pwrup_delay;
+ 	struct ssb_chipcommon_pmu pmu;
+--- a/include/linux/ssb/ssb_regs.h
++++ b/include/linux/ssb/ssb_regs.h
+@@ -170,26 +170,27 @@
+ #define SSB_SPROMSIZE_WORDS_R4		220
+ #define SSB_SPROMSIZE_BYTES_R123	(SSB_SPROMSIZE_WORDS_R123 * sizeof(u16))
+ #define SSB_SPROMSIZE_BYTES_R4		(SSB_SPROMSIZE_WORDS_R4 * sizeof(u16))
+-#define SSB_SPROM_BASE			0x1000
+-#define SSB_SPROM_REVISION		0x107E
++#define SSB_SPROM_BASE1			0x1000
++#define SSB_SPROM_BASE31		0x0800
++#define SSB_SPROM_REVISION		0x007E
+ #define  SSB_SPROM_REVISION_REV		0x00FF	/* SPROM Revision number */
+ #define  SSB_SPROM_REVISION_CRC		0xFF00	/* SPROM CRC8 value */
+ #define  SSB_SPROM_REVISION_CRC_SHIFT	8
+ 
+ /* SPROM Revision 1 */
+-#define SSB_SPROM1_SPID			0x1004	/* Subsystem Product ID for PCI */
+-#define SSB_SPROM1_SVID			0x1006	/* Subsystem Vendor ID for PCI */
+-#define SSB_SPROM1_PID			0x1008	/* Product ID for PCI */
+-#define SSB_SPROM1_IL0MAC		0x1048	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM1_ET0MAC		0x104E	/* 6 bytes MAC address for Ethernet */
+-#define SSB_SPROM1_ET1MAC		0x1054	/* 6 bytes MAC address for 802.11a */
+-#define SSB_SPROM1_ETHPHY		0x105A	/* Ethernet PHY settings */
++#define SSB_SPROM1_SPID			0x0004	/* Subsystem Product ID for PCI */
++#define SSB_SPROM1_SVID			0x0006	/* Subsystem Vendor ID for PCI */
++#define SSB_SPROM1_PID			0x0008	/* Product ID for PCI */
++#define SSB_SPROM1_IL0MAC		0x0048	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM1_ET0MAC		0x004E	/* 6 bytes MAC address for Ethernet */
++#define SSB_SPROM1_ET1MAC		0x0054	/* 6 bytes MAC address for 802.11a */
++#define SSB_SPROM1_ETHPHY		0x005A	/* Ethernet PHY settings */
+ #define  SSB_SPROM1_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM1_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM1_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM1_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM1_BINF			0x105C	/* Board info */
++#define SSB_SPROM1_BINF			0x005C	/* Board info */
+ #define  SSB_SPROM1_BINF_BREV		0x00FF	/* Board Revision */
+ #define  SSB_SPROM1_BINF_CCODE		0x0F00	/* Country Code */
+ #define  SSB_SPROM1_BINF_CCODE_SHIFT	8
+@@ -197,63 +198,63 @@
+ #define  SSB_SPROM1_BINF_ANTBG_SHIFT	12
+ #define  SSB_SPROM1_BINF_ANTA		0xC000	/* Available A-PHY antennas */
+ #define  SSB_SPROM1_BINF_ANTA_SHIFT	14
+-#define SSB_SPROM1_PA0B0		0x105E
+-#define SSB_SPROM1_PA0B1		0x1060
+-#define SSB_SPROM1_PA0B2		0x1062
+-#define SSB_SPROM1_GPIOA		0x1064	/* General Purpose IO pins 0 and 1 */
++#define SSB_SPROM1_PA0B0		0x005E
++#define SSB_SPROM1_PA0B1		0x0060
++#define SSB_SPROM1_PA0B2		0x0062
++#define SSB_SPROM1_GPIOA		0x0064	/* General Purpose IO pins 0 and 1 */
+ #define  SSB_SPROM1_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM1_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM1_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM1_GPIOB		0x1066	/* General Purpuse IO pins 2 and 3 */
++#define SSB_SPROM1_GPIOB		0x0066	/* General Purpuse IO pins 2 and 3 */
+ #define  SSB_SPROM1_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM1_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM1_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM1_MAXPWR		0x1068	/* Power Amplifier Max Power */
++#define SSB_SPROM1_MAXPWR		0x0068	/* Power Amplifier Max Power */
+ #define  SSB_SPROM1_MAXPWR_BG		0x00FF	/* B-PHY and G-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A		0xFF00	/* A-PHY (in dBm Q5.2) */
+ #define  SSB_SPROM1_MAXPWR_A_SHIFT	8
+-#define SSB_SPROM1_PA1B0		0x106A
+-#define SSB_SPROM1_PA1B1		0x106C
+-#define SSB_SPROM1_PA1B2		0x106E
+-#define SSB_SPROM1_ITSSI		0x1070	/* Idle TSSI Target */
++#define SSB_SPROM1_PA1B0		0x006A
++#define SSB_SPROM1_PA1B1		0x006C
++#define SSB_SPROM1_PA1B2		0x006E
++#define SSB_SPROM1_ITSSI		0x0070	/* Idle TSSI Target */
+ #define  SSB_SPROM1_ITSSI_BG		0x00FF	/* B-PHY and G-PHY*/
+ #define  SSB_SPROM1_ITSSI_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_ITSSI_A_SHIFT	8
+-#define SSB_SPROM1_BFLLO		0x1072	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM1_AGAIN		0x1074	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM1_BFLLO		0x0072	/* Boardflags (low 16 bits) */
++#define SSB_SPROM1_AGAIN		0x0074	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM1_AGAIN_BG		0x00FF	/* B-PHY and G-PHY */
+ #define  SSB_SPROM1_AGAIN_BG_SHIFT	0
+ #define  SSB_SPROM1_AGAIN_A		0xFF00	/* A-PHY */
+ #define  SSB_SPROM1_AGAIN_A_SHIFT	8
+ 
+ /* SPROM Revision 2 (inherits from rev 1) */
+-#define SSB_SPROM2_BFLHI		0x1038	/* Boardflags (high 16 bits) */
+-#define SSB_SPROM2_MAXP_A		0x103A	/* A-PHY Max Power */
++#define SSB_SPROM2_BFLHI		0x0038	/* Boardflags (high 16 bits) */
++#define SSB_SPROM2_MAXP_A		0x003A	/* A-PHY Max Power */
+ #define  SSB_SPROM2_MAXP_A_HI		0x00FF	/* Max Power High */
+ #define  SSB_SPROM2_MAXP_A_LO		0xFF00	/* Max Power Low */
+ #define  SSB_SPROM2_MAXP_A_LO_SHIFT	8
+-#define SSB_SPROM2_PA1LOB0		0x103C	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB1		0x103E	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1LOB2		0x1040	/* A-PHY PowerAmplifier Low Settings */
+-#define SSB_SPROM2_PA1HIB0		0x1042	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB1		0x1044	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_PA1HIB2		0x1046	/* A-PHY PowerAmplifier High Settings */
+-#define SSB_SPROM2_OPO			0x1078	/* OFDM Power Offset from CCK Level */
++#define SSB_SPROM2_PA1LOB0		0x003C	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB1		0x003E	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1LOB2		0x0040	/* A-PHY PowerAmplifier Low Settings */
++#define SSB_SPROM2_PA1HIB0		0x0042	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB1		0x0044	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_PA1HIB2		0x0046	/* A-PHY PowerAmplifier High Settings */
++#define SSB_SPROM2_OPO			0x0078	/* OFDM Power Offset from CCK Level */
+ #define  SSB_SPROM2_OPO_VALUE		0x00FF
+ #define  SSB_SPROM2_OPO_UNUSED		0xFF00
+-#define SSB_SPROM2_CCODE		0x107C	/* Two char Country Code */
++#define SSB_SPROM2_CCODE		0x007C	/* Two char Country Code */
+ 
+ /* SPROM Revision 3 (inherits most data from rev 2) */
+-#define SSB_SPROM3_IL0MAC		0x104A	/* 6 bytes MAC address for 802.11b/g */
+-#define SSB_SPROM3_OFDMAPO		0x102C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMALPO		0x1030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_OFDMAHPO		0x1034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
+-#define SSB_SPROM3_GPIOLDC		0x1042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAPO		0x002C	/* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMALPO		0x0030	/* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_OFDMAHPO		0x0034	/* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
++#define SSB_SPROM3_GPIOLDC		0x0042	/* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */
+ #define  SSB_SPROM3_GPIOLDC_OFF		0x0000FF00	/* Off Count */
+ #define  SSB_SPROM3_GPIOLDC_OFF_SHIFT	8
+ #define  SSB_SPROM3_GPIOLDC_ON		0x00FF0000	/* On Count */
+ #define  SSB_SPROM3_GPIOLDC_ON_SHIFT	16
+-#define SSB_SPROM3_CCKPO		0x1078	/* CCK Power Offset */
++#define SSB_SPROM3_IL0MAC		0x004A	/* 6 bytes MAC address for 802.11b/g */
++#define SSB_SPROM3_CCKPO		0x0078	/* CCK Power Offset */
+ #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
+ #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
+@@ -264,100 +265,100 @@
+ #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
+ 
+ /* SPROM Revision 4 */
+-#define SSB_SPROM4_IL0MAC		0x104C	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM4_ETHPHY		0x105A	/* Ethernet PHY settings ?? */
++#define SSB_SPROM4_BFLLO		0x0044	/* Boardflags (low 16 bits) */
++#define SSB_SPROM4_BFLHI		0x0046  /* Board Flags Hi */
++#define SSB_SPROM4_IL0MAC		0x004C	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM4_CCODE		0x0052	/* Country Code (2 bytes) */
++#define SSB_SPROM4_GPIOA		0x0056	/* Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
++#define SSB_SPROM4_GPIOB		0x0058	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
++#define SSB_SPROM4_ETHPHY		0x005A	/* Ethernet PHY settings ?? */
+ #define  SSB_SPROM4_ETHPHY_ET0A		0x001F	/* MII Address for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1A		0x03E0	/* MII Address for enet1 */
+ #define  SSB_SPROM4_ETHPHY_ET1A_SHIFT	5
+ #define  SSB_SPROM4_ETHPHY_ET0M		(1<<14)	/* MDIO for enet0 */
+ #define  SSB_SPROM4_ETHPHY_ET1M		(1<<15)	/* MDIO for enet1 */
+-#define SSB_SPROM4_CCODE		0x1052	/* Country Code (2 bytes) */
+-#define SSB_SPROM4_ANTAVAIL		0x105D  /* Antenna available bitfields */
+-#define SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_A_SHIFT	0
+-#define SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
+-#define SSB_SPROM4_BFLLO		0x1044	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM4_AGAIN01		0x105E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM4_ANTAVAIL		0x005D  /* Antenna available bitfields */
++#define  SSB_SPROM4_ANTAVAIL_A		0x00FF	/* A-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_A_SHIFT	0
++#define  SSB_SPROM4_ANTAVAIL_BG		0xFF00	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM4_ANTAVAIL_BG_SHIFT	8
++#define SSB_SPROM4_AGAIN01		0x005E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM4_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM4_AGAIN0_SHIFT	0
+ #define  SSB_SPROM4_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM4_AGAIN1_SHIFT	8
+-#define SSB_SPROM4_AGAIN23		0x1060
++#define SSB_SPROM4_AGAIN23		0x0060
+ #define  SSB_SPROM4_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM4_AGAIN2_SHIFT	0
+ #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM4_AGAIN3_SHIFT	8
+-#define SSB_SPROM4_BFLHI		0x1046  /* Board Flags Hi */
+-#define SSB_SPROM4_MAXP_BG		0x1080  /* Max Power BG in path 1 */
++#define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
+ #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
+ #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM4_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM4_MAXP_A		0x108A  /* Max Power A in path 1 */
++#define SSB_SPROM4_MAXP_A		0x008A  /* Max Power A in path 1 */
+ #define  SSB_SPROM4_MAXP_A_MASK		0x00FF  /* Mask for Max Power A */
+ #define  SSB_SPROM4_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM4_ITSSI_A_SHIFT	8
+-#define SSB_SPROM4_GPIOA		0x1056	/* Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM4_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM4_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM4_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM4_GPIOB		0x1058	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM4_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM4_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM4_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM4_PA0B0		0x1082	/* The paXbY locations are */
+-#define SSB_SPROM4_PA0B1		0x1084	/*   only guesses */
+-#define SSB_SPROM4_PA0B2		0x1086
+-#define SSB_SPROM4_PA1B0		0x108E
+-#define SSB_SPROM4_PA1B1		0x1090
+-#define SSB_SPROM4_PA1B2		0x1092
++#define SSB_SPROM4_PA0B0		0x0082	/* The paXbY locations are */
++#define SSB_SPROM4_PA0B1		0x0084	/*   only guesses */
++#define SSB_SPROM4_PA0B2		0x0086
++#define SSB_SPROM4_PA1B0		0x008E
++#define SSB_SPROM4_PA1B1		0x0090
++#define SSB_SPROM4_PA1B2		0x0092
+ 
+ /* SPROM Revision 5 (inherits most data from rev 4) */
+-#define SSB_SPROM5_BFLLO		0x104A	/* Boardflags (low 16 bits) */
+-#define SSB_SPROM5_BFLHI		0x104C  /* Board Flags Hi */
+-#define SSB_SPROM5_IL0MAC		0x1052	/* 6 byte MAC address for a/b/g/n */
+-#define SSB_SPROM5_CCODE		0x1044	/* Country Code (2 bytes) */
+-#define SSB_SPROM5_GPIOA		0x1076	/* Gen. Purpose IO # 0 and 1 */
++#define SSB_SPROM5_CCODE		0x0044	/* Country Code (2 bytes) */
++#define SSB_SPROM5_BFLLO		0x004A	/* Boardflags (low 16 bits) */
++#define SSB_SPROM5_BFLHI		0x004C  /* Board Flags Hi */
++#define SSB_SPROM5_IL0MAC		0x0052	/* 6 byte MAC address for a/b/g/n */
++#define SSB_SPROM5_GPIOA		0x0076	/* Gen. Purpose IO # 0 and 1 */
+ #define  SSB_SPROM5_GPIOA_P0		0x00FF	/* Pin 0 */
+ #define  SSB_SPROM5_GPIOA_P1		0xFF00	/* Pin 1 */
+ #define  SSB_SPROM5_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM5_GPIOB		0x1078	/* Gen. Purpose IO # 2 and 3 */
++#define SSB_SPROM5_GPIOB		0x0078	/* Gen. Purpose IO # 2 and 3 */
+ #define  SSB_SPROM5_GPIOB_P2		0x00FF	/* Pin 2 */
+ #define  SSB_SPROM5_GPIOB_P3		0xFF00	/* Pin 3 */
+ #define  SSB_SPROM5_GPIOB_P3_SHIFT	8
+ 
+ /* SPROM Revision 8 */
+-#define SSB_SPROM8_BOARDREV		0x1082	/* Board revision */
+-#define SSB_SPROM8_BFLLO		0x1084	/* Board flags (bits 0-15) */
+-#define SSB_SPROM8_BFLHI		0x1086	/* Board flags (bits 16-31) */
+-#define SSB_SPROM8_BFL2LO		0x1088	/* Board flags (bits 32-47) */
+-#define SSB_SPROM8_BFL2HI		0x108A	/* Board flags (bits 48-63) */
+-#define SSB_SPROM8_IL0MAC		0x108C	/* 6 byte MAC address */
+-#define SSB_SPROM8_CCODE		0x1092	/* 2 byte country code */
+-#define SSB_SPROM8_ANTAVAIL		0x109C  /* Antenna available bitfields*/
+-#define SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_A_SHIFT	8
+-#define SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
+-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
+-#define SSB_SPROM8_AGAIN01		0x109E	/* Antenna Gain (in dBm Q5.2) */
++#define SSB_SPROM8_BOARDREV		0x0082	/* Board revision */
++#define SSB_SPROM8_BFLLO		0x0084	/* Board flags (bits 0-15) */
++#define SSB_SPROM8_BFLHI		0x0086	/* Board flags (bits 16-31) */
++#define SSB_SPROM8_BFL2LO		0x0088	/* Board flags (bits 32-47) */
++#define SSB_SPROM8_BFL2HI		0x008A	/* Board flags (bits 48-63) */
++#define SSB_SPROM8_IL0MAC		0x008C	/* 6 byte MAC address */
++#define SSB_SPROM8_CCODE		0x0092	/* 2 byte country code */
++#define SSB_SPROM8_GPIOA		0x0096	/*Gen. Purpose IO # 0 and 1 */
++#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
++#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
++#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
++#define SSB_SPROM8_GPIOB		0x0098	/* Gen. Purpose IO # 2 and 3 */
++#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
++#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
++#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
++#define SSB_SPROM8_ANTAVAIL		0x009C  /* Antenna available bitfields*/
++#define  SSB_SPROM8_ANTAVAIL_A		0xFF00	/* A-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_A_SHIFT	8
++#define  SSB_SPROM8_ANTAVAIL_BG		0x00FF	/* B-PHY and G-PHY bitfield */
++#define  SSB_SPROM8_ANTAVAIL_BG_SHIFT	0
++#define SSB_SPROM8_AGAIN01		0x009E	/* Antenna Gain (in dBm Q5.2) */
+ #define  SSB_SPROM8_AGAIN0		0x00FF	/* Antenna 0 */
+ #define  SSB_SPROM8_AGAIN0_SHIFT	0
+ #define  SSB_SPROM8_AGAIN1		0xFF00	/* Antenna 1 */
+ #define  SSB_SPROM8_AGAIN1_SHIFT	8
+-#define SSB_SPROM8_AGAIN23		0x10A0
++#define SSB_SPROM8_AGAIN23		0x00A0
+ #define  SSB_SPROM8_AGAIN2		0x00FF	/* Antenna 2 */
+ #define  SSB_SPROM8_AGAIN2_SHIFT	0
+ #define  SSB_SPROM8_AGAIN3		0xFF00	/* Antenna 3 */
+ #define  SSB_SPROM8_AGAIN3_SHIFT	8
+-#define SSB_SPROM8_GPIOA		0x1096	/*Gen. Purpose IO # 0 and 1 */
+-#define  SSB_SPROM8_GPIOA_P0		0x00FF	/* Pin 0 */
+-#define  SSB_SPROM8_GPIOA_P1		0xFF00	/* Pin 1 */
+-#define  SSB_SPROM8_GPIOA_P1_SHIFT	8
+-#define SSB_SPROM8_GPIOB		0x1098	/* Gen. Purpose IO # 2 and 3 */
+-#define  SSB_SPROM8_GPIOB_P2		0x00FF	/* Pin 2 */
+-#define  SSB_SPROM8_GPIOB_P3		0xFF00	/* Pin 3 */
+-#define  SSB_SPROM8_GPIOB_P3_SHIFT	8
+-#define SSB_SPROM8_RSSIPARM2G		0x10A4	/* RSSI params for 2GHz */
++#define SSB_SPROM8_RSSIPARM2G		0x00A4	/* RSSI params for 2GHz */
+ #define  SSB_SPROM8_RSSISMF2G		0x000F
+ #define  SSB_SPROM8_RSSISMC2G		0x00F0
+ #define  SSB_SPROM8_RSSISMC2G_SHIFT	4
+@@ -365,7 +366,7 @@
+ #define  SSB_SPROM8_RSSISAV2G_SHIFT	8
+ #define  SSB_SPROM8_BXA2G		0x1800
+ #define  SSB_SPROM8_BXA2G_SHIFT		11
+-#define SSB_SPROM8_RSSIPARM5G		0x10A6	/* RSSI params for 5GHz */
++#define SSB_SPROM8_RSSIPARM5G		0x00A6	/* RSSI params for 5GHz */
+ #define  SSB_SPROM8_RSSISMF5G		0x000F
+ #define  SSB_SPROM8_RSSISMC5G		0x00F0
+ #define  SSB_SPROM8_RSSISMC5G_SHIFT	4
+@@ -373,47 +374,47 @@
+ #define  SSB_SPROM8_RSSISAV5G_SHIFT	8
+ #define  SSB_SPROM8_BXA5G		0x1800
+ #define  SSB_SPROM8_BXA5G_SHIFT		11
+-#define SSB_SPROM8_TRI25G		0x10A8	/* TX isolation 2.4&5.3GHz */
++#define SSB_SPROM8_TRI25G		0x00A8	/* TX isolation 2.4&5.3GHz */
+ #define  SSB_SPROM8_TRI2G		0x00FF	/* TX isolation 2.4GHz */
+ #define  SSB_SPROM8_TRI5G		0xFF00	/* TX isolation 5.3GHz */
+ #define  SSB_SPROM8_TRI5G_SHIFT		8
+-#define SSB_SPROM8_TRI5GHL		0x10AA	/* TX isolation 5.2/5.8GHz */
++#define SSB_SPROM8_TRI5GHL		0x00AA	/* TX isolation 5.2/5.8GHz */
+ #define  SSB_SPROM8_TRI5GL		0x00FF	/* TX isolation 5.2GHz */
+ #define  SSB_SPROM8_TRI5GH		0xFF00	/* TX isolation 5.8GHz */
+ #define  SSB_SPROM8_TRI5GH_SHIFT	8
+-#define SSB_SPROM8_RXPO			0x10AC  /* RX power offsets */
++#define SSB_SPROM8_RXPO			0x00AC  /* RX power offsets */
+ #define  SSB_SPROM8_RXPO2G		0x00FF	/* 2GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G		0xFF00	/* 5GHz RX power offset */
+ #define  SSB_SPROM8_RXPO5G_SHIFT	8
+-#define SSB_SPROM8_MAXP_BG		0x10C0  /* Max Power 2GHz in path 1 */
++#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
+ #define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
+ #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
+ #define  SSB_SPROM8_ITSSI_BG_SHIFT	8
+-#define SSB_SPROM8_PA0B0		0x10C2	/* 2GHz power amp settings */
+-#define SSB_SPROM8_PA0B1		0x10C4
+-#define SSB_SPROM8_PA0B2		0x10C6
+-#define SSB_SPROM8_MAXP_A		0x10C8  /* Max Power 5.3GHz */
++#define SSB_SPROM8_PA0B0		0x00C2	/* 2GHz power amp settings */
++#define SSB_SPROM8_PA0B1		0x00C4
++#define SSB_SPROM8_PA0B2		0x00C6
++#define SSB_SPROM8_MAXP_A		0x00C8  /* Max Power 5.3GHz */
+ #define  SSB_SPROM8_MAXP_A_MASK		0x00FF  /* Mask for Max Power 5.3GHz */
+ #define  SSB_SPROM8_ITSSI_A		0xFF00	/* Mask for path 1 itssi_a */
+ #define  SSB_SPROM8_ITSSI_A_SHIFT	8
+-#define SSB_SPROM8_MAXP_AHL		0x10CA  /* Max Power 5.2/5.8GHz */
++#define SSB_SPROM8_MAXP_AHL		0x00CA  /* Max Power 5.2/5.8GHz */
+ #define  SSB_SPROM8_MAXP_AH_MASK	0x00FF  /* Mask for Max Power 5.8GHz */
+ #define  SSB_SPROM8_MAXP_AL_MASK	0xFF00  /* Mask for Max Power 5.2GHz */
+ #define  SSB_SPROM8_MAXP_AL_SHIFT	8
+-#define SSB_SPROM8_PA1B0		0x10CC	/* 5.3GHz power amp settings */
+-#define SSB_SPROM8_PA1B1		0x10CE
+-#define SSB_SPROM8_PA1B2		0x10D0
+-#define SSB_SPROM8_PA1LOB0		0x10D2	/* 5.2GHz power amp settings */
+-#define SSB_SPROM8_PA1LOB1		0x10D4
+-#define SSB_SPROM8_PA1LOB2		0x10D6
+-#define SSB_SPROM8_PA1HIB0		0x10D8	/* 5.8GHz power amp settings */
+-#define SSB_SPROM8_PA1HIB1		0x10DA
+-#define SSB_SPROM8_PA1HIB2		0x10DC
+-#define SSB_SPROM8_CCK2GPO		0x1140	/* CCK power offset */
+-#define SSB_SPROM8_OFDM2GPO		0x1142	/* 2.4GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GPO		0x1146	/* 5.3GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GLPO		0x114A	/* 5.2GHz OFDM power offset */
+-#define SSB_SPROM8_OFDM5GHPO		0x114E	/* 5.8GHz OFDM power offset */
++#define SSB_SPROM8_PA1B0		0x00CC	/* 5.3GHz power amp settings */
++#define SSB_SPROM8_PA1B1		0x00CE
++#define SSB_SPROM8_PA1B2		0x00D0
++#define SSB_SPROM8_PA1LOB0		0x00D2	/* 5.2GHz power amp settings */
++#define SSB_SPROM8_PA1LOB1		0x00D4
++#define SSB_SPROM8_PA1LOB2		0x00D6
++#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
++#define SSB_SPROM8_PA1HIB1		0x00DA
++#define SSB_SPROM8_PA1HIB2		0x00DC
++#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
++#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GLPO		0x014A	/* 5.2GHz OFDM power offset */
++#define SSB_SPROM8_OFDM5GHPO		0x014E	/* 5.8GHz OFDM power offset */
+ 
+ /* Values for SSB_SPROM1_BINF_CCODE */
+ enum {