kernel: Copy patches from kernel 4.14 to 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 54 insertions, 0 deletions

diff --git a/target/linux/generic/backport-4.19/076-v4.15-0001-net-phy-broadcom-support-new-device-flag-for-setting.patch b/target/linux/generic/backport-4.19/076-v4.15-0001-net-phy-broadcom-support-new-device-flag-for-setting.patch
new file mode 100644
index 0000000000..a22d272656
--- /dev/null
+++ b/target/linux/generic/backport-4.19/076-v4.15-0001-net-phy-broadcom-support-new-device-flag-for-setting.patch
@@ -0,0 +1,54 @@
+From 2355a6546a053b1c16ebefd6ce1f0cccc00e1da5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 12 Oct 2017 10:21:25 +0200
+Subject: [PATCH] net: phy: broadcom: support new device flag for setting
+ master mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Some of Broadcom's PHYs run by default in slave mode with Automatic
+Slave/Master configuration disabled. It stops them from working properly
+with some devices.
+
+So far it has been verified for BCM54210E and BCM50212E which don't
+work well with Intel's I217-LM and I218-LM:
+http://ark.intel.com/products/60019/Intel-Ethernet-Connection-I217-LM
+http://ark.intel.com/products/71307/Intel-Ethernet-Connection-I218-LM
+I was told there is massive ping loss.
+
+This commit adds support for a new flag which can be set by an ethernet
+driver to fixup PHY setup.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/broadcom.c | 6 ++++++
+ include/linux/brcmphy.h    | 1 +
+ 2 files changed, 7 insertions(+)
+
+--- a/drivers/net/phy/broadcom.c
++++ b/drivers/net/phy/broadcom.c
+@@ -43,6 +43,12 @@ static int bcm54210e_config_init(struct
+ 	val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN;
+ 	bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val);
+ 
++	if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
++		val = phy_read(phydev, MII_CTRL1000);
++		val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
++		phy_write(phydev, MII_CTRL1000, val);
++	}
++
+ 	return 0;
+ }
+ 
+--- a/include/linux/brcmphy.h
++++ b/include/linux/brcmphy.h
+@@ -64,6 +64,7 @@
+ #define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
+ #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
+ #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
++#define PHY_BRCM_EN_MASTER_MODE		0x00010000
+ 
+ /* Broadcom BCM7xxx specific workarounds */
+ #define PHY_BRCM_7XXX_REV(x)		(((x) >> 8) & 0xff)