treewide: remove files for building 5.10 kernel

All targets are bumped to 5.15. Remove the old 5.10 patches, configs
and files using:

  find target/linux -iname '*-5.10' -exec rm -r {} \;

Further, remove the 5.10 include.

Signed-off-by: Nick Hainke <vincent@systemli.org>

1 files changed, 0 insertions, 93 deletions

diff --git a/target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch b/target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch
deleted file mode 100644
index 6db01b4b417..00000000000
--- a/target/linux/generic/backport-5.10/735-v5.14-21-devicetree-bindings-dsa-qca8k-Document-internal-mdio.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 0c994a28e7518f098c84a3049cb2915780db873a Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Fri, 14 May 2021 23:00:11 +0200
-Subject: [PATCH] devicetree: bindings: dsa: qca8k: Document internal mdio
- definition
-
-Document new way of declare mapping of internal PHY to port.
-The new implementation directly declare the PHY connected to the port
-by adding a node in the switch node. The driver detect this and register
-an internal mdiobus using the mapping defined in the mdio node.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- .../devicetree/bindings/net/dsa/qca8k.txt     | 39 +++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
-@@ -21,6 +21,10 @@ described in dsa/dsa.txt. If the QCA8K s
- mdio-bus each subnode describing a port needs to have a valid phandle
- referencing the internal PHY it is connected to. This is because there's no
- N:N mapping of port and PHY id.
-+To declare the internal mdio-bus configuration, declare a mdio node in the
-+switch node and declare the phandle for the port referencing the internal
-+PHY is connected to. In this config a internal mdio-bus is registered and
-+the mdio MASTER is used as communication.
- 
- Don't use mixed external and internal mdio-bus configurations, as this is
- not supported by the hardware.
-@@ -150,26 +154,61 @@ for the internal master mdio-bus configu
- 				port@1 {
- 					reg = <1>;
- 					label = "lan1";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port1>;
- 				};
- 
- 				port@2 {
- 					reg = <2>;
- 					label = "lan2";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port2>;
- 				};
- 
- 				port@3 {
- 					reg = <3>;
- 					label = "lan3";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port3>;
- 				};
- 
- 				port@4 {
- 					reg = <4>;
- 					label = "lan4";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port4>;
- 				};
- 
- 				port@5 {
- 					reg = <5>;
- 					label = "wan";
-+					phy-mode = "internal";
-+					phy-handle = <&phy_port5>;
-+				};
-+			};
-+
-+			mdio {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				phy_port1: phy@0 {
-+					reg = <0>;
-+				};
-+
-+				phy_port2: phy@1 {
-+					reg = <1>;
-+				};
-+
-+				phy_port3: phy@2 {
-+					reg = <2>;
-+				};
-+
-+				phy_port4: phy@3 {
-+					reg = <3>;
-+				};
-+
-+				phy_port5: phy@4 {
-+					reg = <4>;
- 				};
- 			};
- 		};