treewide: remove files for building 5.10 kernel

All targets are bumped to 5.15. Remove the old 5.10 patches, configs
and files using:

  find target/linux -iname '*-5.10' -exec rm -r {} \;

Further, remove the 5.10 include.

Signed-off-by: Nick Hainke <vincent@systemli.org>

1 files changed, 0 insertions, 127 deletions

diff --git a/target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch b/target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch
deleted file mode 100644
index f54dc4276a..0000000000
--- a/target/linux/generic/backport-5.10/746-v5.16-04-net-phy-at803x-better-describe-debug-regs.patch
+++ /dev/null
@@ -1,127 +0,0 @@
-From 67999555ff42e91de7654488d9a7735bd9e84555 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Sun, 10 Oct 2021 00:46:18 +0200
-Subject: net: phy: at803x: better describe debug regs
-
-Give a name to known debug regs from Documentation instead of using
-unknown hex values.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/at803x.c | 30 +++++++++++++++---------------
- 1 file changed, 15 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -86,12 +86,12 @@
- #define AT803X_PSSR			0x11	/*PHY-Specific Status Register*/
- #define AT803X_PSSR_MR_AN_COMPLETE	0x0200
- 
--#define AT803X_DEBUG_REG_0			0x00
-+#define AT803X_DEBUG_ANALOG_TEST_CTRL		0x00
- #define QCA8327_DEBUG_MANU_CTRL_EN		BIT(2)
- #define QCA8337_DEBUG_MANU_CTRL_EN		GENMASK(3, 2)
- #define AT803X_DEBUG_RX_CLK_DLY_EN		BIT(15)
- 
--#define AT803X_DEBUG_REG_5			0x05
-+#define AT803X_DEBUG_SYSTEM_CTRL_MODE		0x05
- #define AT803X_DEBUG_TX_CLK_DLY_EN		BIT(8)
- 
- #define AT803X_DEBUG_REG_HIB_CTRL		0x0b
-@@ -100,7 +100,7 @@
- 
- #define AT803X_DEBUG_REG_3C			0x3C
- 
--#define AT803X_DEBUG_REG_3D			0x3D
-+#define AT803X_DEBUG_REG_GREEN			0x3D
- #define   AT803X_DEBUG_GATE_CLK_IN1000		BIT(6)
- 
- #define AT803X_DEBUG_REG_1F			0x1F
-@@ -274,25 +274,25 @@ static int at803x_read_page(struct phy_d
- 
- static int at803x_enable_rx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0, 0,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0,
- 				     AT803X_DEBUG_RX_CLK_DLY_EN);
- }
- 
- static int at803x_enable_tx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5, 0,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0,
- 				     AT803X_DEBUG_TX_CLK_DLY_EN);
- }
- 
- static int at803x_disable_rx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 				     AT803X_DEBUG_RX_CLK_DLY_EN, 0);
- }
- 
- static int at803x_disable_tx_delay(struct phy_device *phydev)
- {
--	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+	return at803x_debug_reg_mask(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE,
- 				     AT803X_DEBUG_TX_CLK_DLY_EN, 0);
- }
- 
-@@ -1236,9 +1236,9 @@ static int qca83xx_config_init(struct ph
- 	switch (switch_revision) {
- 	case 1:
- 		/* For 100M waveform */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_0, 0x02ea);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, 0x02ea);
- 		/* Turn on Gigabit clock */
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x68a0);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x68a0);
- 		break;
- 
- 	case 2:
-@@ -1246,8 +1246,8 @@ static int qca83xx_config_init(struct ph
- 		fallthrough;
- 	case 4:
- 		phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_AZ_DEBUG, 0x803f);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3D, 0x6860);
--		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_5, 0x2c46);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_GREEN, 0x6860);
-+		at803x_debug_reg_write(phydev, AT803X_DEBUG_SYSTEM_CTRL_MODE, 0x2c46);
- 		at803x_debug_reg_write(phydev, AT803X_DEBUG_REG_3C, 0x6000);
- 		break;
- 	}
-@@ -1258,7 +1258,7 @@ static int qca83xx_config_init(struct ph
- 	 */
- 	if (phydev->drv->phy_id == QCA8327_A_PHY_ID ||
- 	    phydev->drv->phy_id == QCA8327_B_PHY_ID)
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
- 
- 	/* Following original QCA sourcecode set port to prefer master */
-@@ -1276,12 +1276,12 @@ static void qca83xx_link_change_notify(s
- 	/* Set DAC Amplitude adjustment to +6% for 100m on link running */
- 	if (phydev->state == PHY_RUNNING) {
- 		if (phydev->speed == SPEED_100)
--			at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+			at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 					      QCA8327_DEBUG_MANU_CTRL_EN,
- 					      QCA8327_DEBUG_MANU_CTRL_EN);
- 	} else {
- 		/* Reset DAC Amplitude adjustment */
--		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+		at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL,
- 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
- 	}
- }
-@@ -1328,7 +1328,7 @@ static int qca83xx_suspend(struct phy_de
- 		phy_modify(phydev, MII_BMCR, mask, 0);
- 	}
- 
--	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_3D,
-+	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN,
- 			      AT803X_DEBUG_GATE_CLK_IN1000, 0);
- 
- 	at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_HIB_CTRL,