kernel: add support for kernel 5.4

The following patches were removed because they are integrated in the upstream kernel 5.4:
 * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
 * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
 * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
 * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
 * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
 * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
 * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
 * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
 * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
 * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
 * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
 * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
 * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
 * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
 * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
 * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
 * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
 * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
 * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
 * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
 * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
 * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
 * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
 * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
 * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
 * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
 * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
 * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
 * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
 * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
 * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
 * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
 * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
 * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
 * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
 * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
 * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
 * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
 * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
 * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
 * pending-5.4/220-optimize_inlining.patch
 * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
 * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
 * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
 * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch

Some bigger changes were done to this feature and we did not port this patch yet:
 * hack-5.4/207-disable-modorder.patch

This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes:
 * hack-5.4/930-crashlog.patch

A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations.
 * pending-5.4/304-mips_disable_fpu.patch

- no crashlog support yet as a required file got deleted upstream
- Removed patch below, which is now seen as a recursive dependency [1]
- Removed patch below due to build error [2]
- fix still required to avoid identical function def [3]
- Fixes included from Blocktrron
- Fixes included from Chunkeey
- Fix included from nbd regarding "dst leak in Flow Offload"

[1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
[2] target/linux/generic/hack-5.4/207-disable-modorder.patch
[3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 24 insertions, 9 deletions

diff --git a/target/linux/generic/hack-5.4/259-regmap_dynamic.patch b/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
index ec4636dbee..9950f156d3 100644
--- a/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
+++ b/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
@@ -18,14 +18,14 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  # subsystems should select the appropriate symbols.
  
  config REGMAP
--	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
+-	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ || REGMAP_SCCB || REGMAP_I3C)
  	select IRQ_DOMAIN if REGMAP_IRQ
 -	bool
 +	tristate
  
  config REGCACHE_COMPRESSED
  	select LZO_COMPRESS
-@@ -18,6 +17,7 @@ config REGMAP_AC97
+@@ -18,38 +17,49 @@ config REGMAP_AC97
  
  config REGMAP_I2C
  	tristate
@@ -33,7 +33,9 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	depends on I2C
  
  config REGMAP_SLIMBUS
-@@ -26,20 +26,26 @@ config REGMAP_SLIMBUS
+ 	tristate
++	select REGMAP
+ 	depends on SLIMBUS
  
  config REGMAP_SPI
  	tristate
@@ -42,13 +44,13 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	depends on SPI
  
  config REGMAP_SPMI
-+	select REGMAP
  	tristate
++	select REGMAP
  	depends on SPMI
  
  config REGMAP_W1
-+	select REGMAP
  	tristate
++	select REGMAP
  	depends on W1
  
  config REGMAP_MMIO
@@ -56,10 +58,23 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +	select REGMAP
  
  config REGMAP_IRQ
-+	select REGMAP
  	bool
++	select REGMAP
  
  config REGMAP_SOUNDWIRE
+ 	tristate
++	select REGMAP
+ 	depends on SOUNDWIRE
+ 
+ config REGMAP_SCCB
+ 	tristate
++	select REGMAP
+ 	depends on I2C
+ 
+ config REGMAP_I3C
+ 	tristate
++	select REGMAP
+ 	depends on I3C
 --- a/drivers/base/regmap/Makefile
 +++ b/drivers/base/regmap/Makefile
 @@ -2,10 +2,14 @@
@@ -83,7 +98,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
 --- a/drivers/base/regmap/regmap.c
 +++ b/drivers/base/regmap/regmap.c
-@@ -13,6 +13,7 @@
+@@ -9,6 +9,7 @@
  #include <linux/device.h>
  #include <linux/slab.h>
  #include <linux/export.h>
@@ -91,7 +106,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  #include <linux/mutex.h>
  #include <linux/err.h>
  #include <linux/of.h>
-@@ -3039,3 +3040,5 @@ static int __init regmap_initcall(void)
+@@ -3124,3 +3125,5 @@ static int __init regmap_initcall(void)
  	return 0;
  }
  postcore_initcall(regmap_initcall);
@@ -99,7 +114,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 +MODULE_LICENSE("GPL");
 --- a/include/linux/regmap.h
 +++ b/include/linux/regmap.h
-@@ -187,7 +187,7 @@ struct reg_sequence {
+@@ -185,7 +185,7 @@ struct reg_sequence {
  	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
  })