aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/other-files/init
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2020-05-16 17:39:26 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-06-21 20:56:42 +0200
commit3a8d65010d999275a583c42064b60ab9a3cdce84 (patch)
treee1e0c60b4f3f99639b1d9e358c470d092366c218 /target/linux/generic/other-files/init
parent39f2f9b1bf719ff11a4497cbfa6de4e3380e35bc (diff)
downloadupstream-3a8d65010d999275a583c42064b60ab9a3cdce84.tar.gz
upstream-3a8d65010d999275a583c42064b60ab9a3cdce84.tar.bz2
upstream-3a8d65010d999275a583c42064b60ab9a3cdce84.zip
ramips: add support for ELECOM WRC-2533GST2
ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 32 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GST2 normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/generic/other-files/init')
0 files changed, 0 insertions, 0 deletions