diff options
author | Hauke Mehrtens <hauke@hauke-m.de> | 2018-11-01 18:01:44 +0100 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2018-12-15 14:28:48 +0100 |
commit | 9261e7447ea7b8d33b70ff6ea008f2041a88e255 (patch) | |
tree | c9af04326ac9953a33fc8fd3e852c11fc1eb4df3 /target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch | |
parent | 52a82ce3dd901a1536c7d7d9d963e9c2d761c816 (diff) | |
download | upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.gz upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.tar.bz2 upstream-9261e7447ea7b8d33b70ff6ea008f2041a88e255.zip |
kernel: Make the patches apply on top of 4.19
This makes the patches which were just copied in the previous commit
apply on top of kernel 4.19.
The patches in the backports-4.19 folder were checked if they are really
in kernel 4.19 based on the title and only removed if they were found in
the upstream kernel.
The following additional patches form the pending folder went into
upstream Linux 4.19:
pending-4.19/171-usb-dwc2-Fix-inefficient-copy-of-unaligned-buffers.patch
pending-4.19/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch
pending-4.19/478-mtd-spi-nor-Add-support-for-XM25QH64A-and-XM25QH128A.patch
pending-4.19/479-mtd-spi-nor-add-eon-en25qh32.patch
pending-4.19/950-tty-serial-exar-generalize-rs485-setup.patch
pending-4.19/340-MIPS-mm-remove-mips_dma_mapping_error.patch
Bigger changes were introduced to the m25p80 spi nor driver, as far as I
saw it in the new code, it now has the functionality provided in this
patch:
pending-4.19/450-mtd-m25p80-allow-fallback-from-spi_flash_read-to-reg.patch
Part of this patch went upstream independent of OpenWrt:
hack-4.19/220-gc_sections.patch
This patch was reworked to match the changes done upstream.
The MIPS DMA API changed a lot, this patch was rewritten to match the
new DMA handling:
pending-4.19/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
I did bigger manual changes to the following patches and I am not 100% sure if they are all correct:
pending-4.19/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
pending-4.19/411-mtd-partial_eraseblock_write.patch
pending-4.19/600-netfilter_conntrack_flush.patch
pending-4.19/611-netfilter_match_bypass_default_table.patch
pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
hack-4.19/211-host_tools_portability.patch
hack-4.19/221-module_exports.patch
hack-4.19/321-powerpc_crtsavres_prereq.patch
hack-4.19/902-debloat_proc.patch
This is based on patchset from Marko Ratkaj <marko.ratkaj@sartura.hr>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch')
-rw-r--r-- | target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch index 4e1dfbe776..645b938f3a 100644 --- a/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch +++ b/target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch @@ -38,7 +38,7 @@ Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com> --- a/fs/jffs2/Kconfig +++ b/fs/jffs2/Kconfig -@@ -139,6 +139,15 @@ config JFFS2_LZO +@@ -135,6 +135,15 @@ config JFFS2_LZO This feature was added in July, 2007. Say 'N' if you need compatibility with older bootloaders or kernels. @@ -1087,7 +1087,7 @@ Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com> #define JFFS2_NODE_ACCURATE 0x2000 --- a/lib/Kconfig +++ b/lib/Kconfig -@@ -259,6 +259,12 @@ config ZSTD_DECOMPRESS +@@ -278,6 +278,12 @@ config ZSTD_DECOMPRESS source "lib/xz/Kconfig" @@ -1119,7 +1119,7 @@ Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com> ifdef CONFIG_FUNCTION_TRACER ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS)) -@@ -122,6 +132,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/ +@@ -128,6 +138,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/ obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/ obj-$(CONFIG_XZ_DEC) += xz/ obj-$(CONFIG_RAID6_PQ) += raid6/ |