diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2010-03-09 14:35:41 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2010-03-09 14:35:41 +0000 |
| commit | 513e8c583f8747d2be20a0a10cf9e58b27d0e82b (patch) | |
| tree | 51eb186a88ad4e37ac8f0be63ccc887832564025 /target/linux/ifxmips | |
| parent | a5441beb82e7dde4edb1206535aa7710ba941bc4 (diff) | |
| download | upstream-513e8c583f8747d2be20a0a10cf9e58b27d0e82b.tar.gz upstream-513e8c583f8747d2be20a0a10cf9e58b27d0e82b.tar.bz2 upstream-513e8c583f8747d2be20a0a10cf9e58b27d0e82b.zip | |
Several small fixes for ar8216 driver (patch by Jonas Gorski)
* Create defines for some magic values/masks.
* Change vlan_id to u16, to allow VIDs > 255.
* Add a range check to set_pvid as it isn't a VID, but the index
in the vlan table.
* Set the max VID to 4094, since 4095 is a reserved value and
should not be used.
* In mangle_rx replace the provided VID with the VID of the table
entry of the port, not the index of the table.
* In hw_apply, remove a redundant emptyness check (was already
checked several lines above).
* In no vlan mode do not set the ingress mode to secure, as there
are no vlan table entries, but to use the port's destination
masks. Otherwise the switch won't forward anything.
* In read_status tell that the phy is up (taken from the rtl8306
driver).
SVN-Revision: 20083
Diffstat (limited to 'target/linux/ifxmips')
0 files changed, 0 insertions, 0 deletions