aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
diff options
context:
space:
mode:
authorHans Geiblinger <cybrnook2002@yahoo.com>2020-09-09 18:45:02 -0400
committerChristian Lamparter <chunkeey@gmail.com>2020-09-25 19:31:51 +0200
commita9071d02b5ab11fbd73ea42076a09f2fd8136517 (patch)
tree2379c735897dff660a83b0ff68171ba886202fd3 /target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
parente24635710c7e6444afa463c59f3d81fe634eb3c7 (diff)
downloadupstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.tar.gz
upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.tar.bz2
upstream-a9071d02b5ab11fbd73ea42076a09f2fd8136517.zip
ipq40xx: Add support for Linksys MR8300 (Dallas)
The Linksys MR8300 is based on QCA4019 and QCA9888 and provides three, independent radios. NAND provides two, alternate kernel/firmware images with fail-over provided by the OEM U-Boot. Hardware Highlights: SoC: IPQ4019 at 717 MHz (4 CPUs) RAM: 512MB RAM SoC: Qualcomm IPQ4019 at 717 MHz (4 CPUs) RAM: 512M DDR3 FLASH: 256 MB NAND (Winbond W29N02GV, 8-bit parallel) ETH: Qualcomm QCA8075 (4x GigE LAN, 1x GigE Internet Ethernet Jacks) BTN: Reset and WPS USB: USB3.0, single port on rear with LED SERIAL: Serial pads internal (unpopulated) LED: Four status lights on top + USB LED WIFI1: 2x2:2 QCA4019 2.4 GHz radio on ch. 1-14 WIFI2: 2x2:2 QCA4019 5 GHz radio on ch. 36-64 WIFI3: 2x2:2 QCA9888 5 GHz radio on ch. 100-165 Support is based on the already supported EA8300. Key differences: EA8300 has 256MB RAM where MR8300 has 512MB RAM. MR8300 has a revised top panel LED setup. Installation: "Factory" images may be installed directly through the OEM GUI using URL: https://ip-of-router/fwupdate.html (Typically 192.168.1.1) Signed-off-by: Hans Geiblinger <cybrnook2002@yahoo.com> [copied Hardware-highlights from EA8300. Fixed alphabetical order. fixed commit subject, removed bogus unit-address of keys, fixed author (used Signed-off-By to From:) ] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/base-files/lib/upgrade/platform.sh')
-rw-r--r--target/linux/ipq40xx/base-files/lib/upgrade/platform.sh3
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index e09ab0344b..09ea396469 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -102,7 +102,8 @@ platform_do_upgrade() {
nand_do_upgrade "$1"
;;
linksys,ea6350v3 |\
- linksys,ea8300)
+ linksys,ea8300 |\
+ linksys,mr8300)
platform_do_upgrade_linksys "$1"
;;
meraki,mr33)