aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/image/Makefile
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2019-03-14 23:46:43 +0900
committerChristian Lamparter <chunkeey@gmail.com>2019-03-21 00:57:20 +0100
commit5c112582974218fd4e4624b36dbdeb8edeff55b7 (patch)
tree1e3272497ca44d9bf9803966b3d4a2c959cae3a2 /target/linux/ipq40xx/image/Makefile
parentd2c3eb1e431fa8b1421c3633576781e5d4eede58 (diff)
downloadupstream-5c112582974218fd4e4624b36dbdeb8edeff55b7.tar.gz
upstream-5c112582974218fd4e4624b36dbdeb8edeff55b7.tar.bz2
upstream-5c112582974218fd4e4624b36dbdeb8edeff55b7.zip
ramips: add support for I-O DATA WN-AC733GR3
I-O DATA WN-AC733GR3 is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification - SoC : MediaTek MT7620A - RAM : DDR2 64 MiB - Flash : SPI-NOR 8 MiB - WLAN : 2.4/5 GHz - 2.4 GHz : MT7620A (SoC), 2T2R - 5 GHz : MT7610E, 1T1R - Ethernet : 10/100/1000 Mbps (RTL8367RB) - LED/key : 4x/4x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: Vcc, RX, GND, TX from LED side - 57600n8 Flash instruction using factory image: 1. Boot WN-AC733GR3 normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/image/Makefile')
0 files changed, 0 insertions, 0 deletions