ipq806x: remove support for kernel 4.19

The target uses 5.4 as default kernel since 04/2020.

Kernel 4.19 support is not really maintained anymore, and there has
been a lot of changes between 4.19 and 5.4 on this target. Despite,
new devices are typically added for 5.4 only anyway.

Thus, make maintaining of old stuff and reviewing of new stuff
easier by removing support for kernel 4.19.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 204 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
deleted file mode 100644
index 3e6732e9df..0000000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi
+++ /dev/null
@@ -1,204 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	chosen {
-		bootargs = "console=ttyMSM0,115200n8";
-		/* append to bootargs adding the root deviceblock nbr from bootloader */
-		append-rootblock = "ubi.mtd=";
-	};
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-
-	max-link-speed = <1>;
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&pcie2 {
-	status = "okay";
-};
-
-&nand_controller {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions: partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0000000 0x0040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x0040000 0x0140000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "SBL2";
-				reg = <0x0180000 0x0140000>;
-				read-only;
-			};
-
-			partition@2c0000 {
-				label = "SBL3";
-				reg = <0x02c0000 0x0280000>;
-				read-only;
-			};
-
-			partition@540000 {
-				label = "DDRCONFIG";
-				reg = <0x0540000 0x0120000>;
-				read-only;
-			};
-
-			partition@660000 {
-				label = "SSD";
-				reg = <0x0660000 0x0120000>;
-				read-only;
-			};
-
-			partition@780000 {
-				label = "TZ";
-				reg = <0x0780000 0x0280000>;
-				read-only;
-			};
-
-			partition@a00000 {
-				label = "RPM";
-				reg = <0x0a00000 0x0280000>;
-				read-only;
-			};
-
-			art: partition@c80000 {
-				label = "art";
-				reg = <0x0c80000 0x0140000>;
-				read-only;
-			};
-
-			partition@dc0000 {
-				label = "APPSBL";
-				reg = <0x0dc0000 0x0100000>;
-				read-only;
-			};
-
-			partition@ec0000 {
-				label = "u_env";
-				reg = <0x0ec0000 0x0040000>;
-			};
-
-			partition@f00000 {
-				label = "s_env";
-				reg = <0x0f00000 0x0040000>;
-			};
-
-			partition@f40000 {
-				label = "devinfo";
-				reg = <0x0f40000 0x0040000>;
-			};
-
-			partition@f80000 {
-				label = "kernel1";
-				reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs */
-			};
-
-			partition@1280000 {
-				label = "rootfs1";
-				reg = <0x1280000 0x2500000>;
-			};
-
-			partition@3780000 {
-				label = "kernel2";
-				reg = <0x3780000 0x2800000>;
-			};
-
-			partition@3a80000 {
-				label = "rootfs2";
-				reg = <0x3a80000 0x2500000>;
-			};
-		};
-	};
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	phy0: ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x00010 0x2613a0    /* PWS_REG */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-};
-
-&gmac1 {
-	status = "okay";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};