ipq806x: consolidate DTS files directory

Commit 29ca10e537ee ("ipq806x: remove support for kernel 4.19") moved
DTS files to "files" directory, but after that a new DTS file was added
to the former "files-5.4" directory. Move it to the new directory.

Fixes: 98b86296e67d ("ipq806x: add support for ASRock G10")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>

1 files changed, 0 insertions, 242 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts
deleted file mode 100644
index 15ed5b4773..0000000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-g10.dts
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	compatible = "asrock,g10", "qcom,ipq8064";
-	model = "ASRock G10";
-
-	aliases {
-		ethernet0 = &gmac1;
-		ethernet1 = &gmac0;
-
-		led-boot = &led_status_blue;
-		led-failsafe = &led_status_amber;
-		led-running = &led_status_blue;
-		led-upgrade = &led_status_amber;
-	};
-
-	chosen {
-		bootargs-override = "console=ttyMSM0,115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		/*
-		 * this is a bit misleading. Because there are about seven
-		 * multicolor LEDs connected all wired together in parallel.
-		 */
-
-		status_yellow {
-			label = "yellow:status";
-			gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_amber: status_amber {
-			label = "amber:status";
-			gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-		};
-
-		led_status_blue: status_blue {
-			label = "blue:status";
-			gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-		};
-
-		/*
-		 * LED is declared in vendors boardfile but it's not
-		 * working and the manual doesn't mention anything
-		 * about the LED being white.
-
-		status_white {
-			label = "white:status";
-			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-		};
-		*/
-	};
-
-	i2c-gpio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "i2c-gpio";
-		gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */
-			<&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */
-		i2c-gpio,delay-us = <5>;
-		i2c-gpio,scl-output-only;
-
-		mcu@50 {
-			reg = <0x50>;
-			compatible = "sonix,sn8f25e21";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&button_pins>;
-		pinctrl-names = "default";
-
-		ir-remote {
-			label = "ir-remote";
-			gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>;
-			linux,code = <BTN_0>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-
-		wps5g {
-			label = "wps5g";
-			gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		wps2g {
-			label = "wps2g";
-			gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-	};
-};
-
-&adm_dma {
-	status = "okay";
-};
-
-&gmac1 {
-	status = "okay";
-
-	pinctrl-0 = <&rgmii2_pins>;
-	pinctrl-names = "default";
-
-	phy-mode = "rgmii";
-	qcom,id = <1>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gmac2 {
-	status = "okay";
-
-	phy-mode = "sgmii";
-	qcom,id = <2>;
-
-	fixed-link {
-		speed = <1000>;
-		full-duplex;
-	};
-};
-
-&gsbi4_serial {
-	pinctrl-0 = <&uart0_pins>;
-	pinctrl-names = "default";
-};
-
-&mdio0 {
-	status = "okay";
-
-	pinctrl-0 = <&mdio0_pins>;
-	pinctrl-names = "default";
-
-	ethernet-phy@0 {
-		reg = <0>;
-		qca,ar8327-initvals = <
-			0x00004 0x7600000   /* PAD0_MODE */
-			0x00008 0x1000000   /* PAD5_MODE */
-			0x0000c 0x80        /* PAD6_MODE */
-			0x000e4 0x6a545     /* MAC_POWER_SEL */
-			0x000e0 0xc74164de  /* SGMII_CTRL */
-			0x0007c 0x4e        /* PORT0_STATUS */
-			0x00094 0x4e        /* PORT6_STATUS */
-			>;
-	};
-};
-
-&nand_controller {
-	status = "okay";
-
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-
-	nand@0 {
-		reg = <0>;
-		compatible = "qcom,nandcs";
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-		nand-ecc-step-size = <512>;
-
-		partitions {
-			compatible = "qcom,smem";
-		};
-	};
-};
-
-&pcie0 {
-	status = "okay";
-};
-
-&pcie1 {
-	status = "okay";
-};
-
-&qcom_pinmux {
-	led_pins: led_pins {
-		mux {
-			pins = "gpio7", "gpio8", "gpio9", "gpio26";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	button_pins: button_pins {
-		mux {
-			pins = "gpio15", "gpio16", "gpio64", "gpio65";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	uart0_pins: uart0_pins {
-		mux {
-			pins = "gpio10", "gpio11";
-			function = "gsbi4";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-};
-
-&rpm {
-	pinctrl-0 = <&i2c4_pins>;
-	pinctrl-names = "default";
-};
-
-&usb3_0 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&tcsr {
-	qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
-
-/delete-node/ &pcie2_pins;
-/delete-node/ &pcie2;