diff options
author | Tee Hao Wei <angelsl@in04.sg> | 2021-05-18 03:46:36 +0800 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-06-05 23:39:14 +0200 |
commit | b232680f847f4ea8d058849a51dedebb8e398a01 (patch) | |
tree | 38a72cc900d164067232717d05cc9fc79bdbfa9e /target/linux/ipq806x/files/arch | |
parent | 6d23e474ad9d0eba935696c66db4fb6e2037bb72 (diff) | |
download | upstream-b232680f847f4ea8d058849a51dedebb8e398a01.tar.gz upstream-b232680f847f4ea8d058849a51dedebb8e398a01.tar.bz2 upstream-b232680f847f4ea8d058849a51dedebb8e398a01.zip |
ramips: add support for Linksys EA8100 v1
Specifications:
- SoC: MT7621AT
- RAM: 256MB
- Flash: 128MB NAND
- Ethernet: 5 Gigabit ports
- WiFi: 2.4G/5G MT7615N
- USB: 1 USB 3.0, 1 USB 2.0
This device is very similar to the EA7300 v1/v2 and EA7500 v2.
Installation:
Upload the generated factory image through the factory web interface.
(following part taken from EA7300 v2 commit message:)
This might fail due to the A/B nature of this device. When flashing, OEM
firmware writes over the non-booted partition. If booted from 'A',
flashing over 'B' won't work. To get around this, you should flash the
OEM image over itself. This will then boot the router from 'B' and
allow you to flash OpenWRT without problems.
Reverting to factory firmware:
Hard-reset the router three times to force it to boot from 'B.' This is
where the stock firmware resides. To remove any traces of OpenWRT from
your router simply flash the OEM image at this point.
With thanks to Leon Poon (@LeonPoon) for the initial bringup.
Signed-off-by: Tee Hao Wei <angelsl@in04.sg>
[add missing entry in 10_fix_wifi_mac]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ipq806x/files/arch')
0 files changed, 0 insertions, 0 deletions