aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-02-11 10:09:23 +0000
committerJohn Crispin <john@openwrt.org>2015-02-11 10:09:23 +0000
commit88ddb3746188037afd38d631f7a893587fa8bdf0 (patch)
treedf4684db63441435126c4b6ff1fda4ce615e1ff0 /target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch
parentddcbef5766fa18f52e7a7d1928b25edc63e73937 (diff)
downloadupstream-88ddb3746188037afd38d631f7a893587fa8bdf0.tar.gz
upstream-88ddb3746188037afd38d631f7a893587fa8bdf0.tar.bz2
upstream-88ddb3746188037afd38d631f7a893587fa8bdf0.zip
ipq806x: update target to v3.18
Patches in the ipq806x/patches folder were out of tree in v3.14. The newest patch at the time was from June, so we can safely assume that either the patches have been merged, or they have been rejected for a good reason. If patches are seen missing, we'll cherry-pick them on a per-needed basis. This new kernel have been tested on AP148, which seems to works fine. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> SVN-Revision: 44386
Diffstat (limited to 'target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch')
-rw-r--r--target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch897
1 files changed, 0 insertions, 897 deletions
diff --git a/target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch b/target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch
deleted file mode 100644
index 3c52f24674..0000000000
--- a/target/linux/ipq806x/patches/0065-spi-Add-Qualcomm-QUP-SPI-controller-support.patch
+++ /dev/null
@@ -1,897 +0,0 @@
-From 24884115a6029995dba2561b1ee810f28a34271a Mon Sep 17 00:00:00 2001
-From: "Ivan T. Ivanov" <iivanov@mm-sol.com>
-Date: Thu, 13 Feb 2014 18:21:38 +0200
-Subject: [PATCH 065/182] spi: Add Qualcomm QUP SPI controller support
-
-Qualcomm Universal Peripheral (QUP) core is an AHB slave that
-provides a common data path (an output FIFO and an input FIFO)
-for serial peripheral interface (SPI) mini-core. SPI in master
-mode supports up to 50MHz, up to four chip selects, programmable
-data path from 4 bits to 32 bits and numerous protocol variants.
-
-Cc: Alok Chauhan <alokc@codeaurora.org>
-Cc: Gilad Avidov <gavidov@codeaurora.org>
-Cc: Kiran Gunda <kgunda@codeaurora.org>
-Cc: Sagar Dharia <sdharia@codeaurora.org>
-Cc: dsneddon@codeaurora.org
-Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/spi/Kconfig | 13 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-qup.c | 837 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 851 insertions(+)
- create mode 100644 drivers/spi/spi-qup.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -390,6 +390,19 @@ config SPI_RSPI
- help
- SPI driver for Renesas RSPI and QSPI blocks.
-
-+config SPI_QUP
-+ tristate "Qualcomm SPI controller with QUP interface"
-+ depends on ARCH_MSM_DT
-+ help
-+ Qualcomm Universal Peripheral (QUP) core is an AHB slave that
-+ provides a common data path (an output FIFO and an input FIFO)
-+ for serial peripheral interface (SPI) mini-core. SPI in master
-+ mode supports up to 50MHz, up to four chip selects, programmable
-+ data path from 4 bits to 32 bits and numerous protocol variants.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called spi_qup.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -60,6 +60,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
- spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
---- /dev/null
-+++ b/drivers/spi/spi-qup.c
-@@ -0,0 +1,837 @@
-+/*
-+ * Copyright (c) 2008-2014, The Linux foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License rev 2 and
-+ * only rev 2 as published by the free Software foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/spi/spi.h>
-+
-+#define QUP_CONFIG 0x0000
-+#define QUP_STATE 0x0004
-+#define QUP_IO_M_MODES 0x0008
-+#define QUP_SW_RESET 0x000c
-+#define QUP_OPERATIONAL 0x0018
-+#define QUP_ERROR_FLAGS 0x001c
-+#define QUP_ERROR_FLAGS_EN 0x0020
-+#define QUP_OPERATIONAL_MASK 0x0028
-+#define QUP_HW_VERSION 0x0030
-+#define QUP_MX_OUTPUT_CNT 0x0100
-+#define QUP_OUTPUT_FIFO 0x0110
-+#define QUP_MX_WRITE_CNT 0x0150
-+#define QUP_MX_INPUT_CNT 0x0200
-+#define QUP_MX_READ_CNT 0x0208
-+#define QUP_INPUT_FIFO 0x0218
-+
-+#define SPI_CONFIG 0x0300
-+#define SPI_IO_CONTROL 0x0304
-+#define SPI_ERROR_FLAGS 0x0308
-+#define SPI_ERROR_FLAGS_EN 0x030c
-+
-+/* QUP_CONFIG fields */
-+#define QUP_CONFIG_SPI_MODE (1 << 8)
-+#define QUP_CONFIG_CLOCK_AUTO_GATE BIT(13)
-+#define QUP_CONFIG_NO_INPUT BIT(7)
-+#define QUP_CONFIG_NO_OUTPUT BIT(6)
-+#define QUP_CONFIG_N 0x001f
-+
-+/* QUP_STATE fields */
-+#define QUP_STATE_VALID BIT(2)
-+#define QUP_STATE_RESET 0
-+#define QUP_STATE_RUN 1
-+#define QUP_STATE_PAUSE 3
-+#define QUP_STATE_MASK 3
-+#define QUP_STATE_CLEAR 2
-+
-+#define QUP_HW_VERSION_2_1_1 0x20010001
-+
-+/* QUP_IO_M_MODES fields */
-+#define QUP_IO_M_PACK_EN BIT(15)
-+#define QUP_IO_M_UNPACK_EN BIT(14)
-+#define QUP_IO_M_INPUT_MODE_MASK_SHIFT 12
-+#define QUP_IO_M_OUTPUT_MODE_MASK_SHIFT 10
-+#define QUP_IO_M_INPUT_MODE_MASK (3 << QUP_IO_M_INPUT_MODE_MASK_SHIFT)
-+#define QUP_IO_M_OUTPUT_MODE_MASK (3 << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT)
-+
-+#define QUP_IO_M_OUTPUT_BLOCK_SIZE(x) (((x) & (0x03 << 0)) >> 0)
-+#define QUP_IO_M_OUTPUT_FIFO_SIZE(x) (((x) & (0x07 << 2)) >> 2)
-+#define QUP_IO_M_INPUT_BLOCK_SIZE(x) (((x) & (0x03 << 5)) >> 5)
-+#define QUP_IO_M_INPUT_FIFO_SIZE(x) (((x) & (0x07 << 7)) >> 7)
-+
-+#define QUP_IO_M_MODE_FIFO 0
-+#define QUP_IO_M_MODE_BLOCK 1
-+#define QUP_IO_M_MODE_DMOV 2
-+#define QUP_IO_M_MODE_BAM 3
-+
-+/* QUP_OPERATIONAL fields */
-+#define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11)
-+#define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10)
-+#define QUP_OP_IN_SERVICE_FLAG BIT(9)
-+#define QUP_OP_OUT_SERVICE_FLAG BIT(8)
-+#define QUP_OP_IN_FIFO_FULL BIT(7)
-+#define QUP_OP_OUT_FIFO_FULL BIT(6)
-+#define QUP_OP_IN_FIFO_NOT_EMPTY BIT(5)
-+#define QUP_OP_OUT_FIFO_NOT_EMPTY BIT(4)
-+
-+/* QUP_ERROR_FLAGS and QUP_ERROR_FLAGS_EN fields */
-+#define QUP_ERROR_OUTPUT_OVER_RUN BIT(5)
-+#define QUP_ERROR_INPUT_UNDER_RUN BIT(4)
-+#define QUP_ERROR_OUTPUT_UNDER_RUN BIT(3)
-+#define QUP_ERROR_INPUT_OVER_RUN BIT(2)
-+
-+/* SPI_CONFIG fields */
-+#define SPI_CONFIG_HS_MODE BIT(10)
-+#define SPI_CONFIG_INPUT_FIRST BIT(9)
-+#define SPI_CONFIG_LOOPBACK BIT(8)
-+
-+/* SPI_IO_CONTROL fields */
-+#define SPI_IO_C_FORCE_CS BIT(11)
-+#define SPI_IO_C_CLK_IDLE_HIGH BIT(10)
-+#define SPI_IO_C_MX_CS_MODE BIT(8)
-+#define SPI_IO_C_CS_N_POLARITY_0 BIT(4)
-+#define SPI_IO_C_CS_SELECT(x) (((x) & 3) << 2)
-+#define SPI_IO_C_CS_SELECT_MASK 0x000c
-+#define SPI_IO_C_TRISTATE_CS BIT(1)
-+#define SPI_IO_C_NO_TRI_STATE BIT(0)
-+
-+/* SPI_ERROR_FLAGS and SPI_ERROR_FLAGS_EN fields */
-+#define SPI_ERROR_CLK_OVER_RUN BIT(1)
-+#define SPI_ERROR_CLK_UNDER_RUN BIT(0)
-+
-+#define SPI_NUM_CHIPSELECTS 4
-+
-+/* high speed mode is when bus rate is greater then 26MHz */
-+#define SPI_HS_MIN_RATE 26000000
-+#define SPI_MAX_RATE 50000000
-+
-+#define SPI_DELAY_THRESHOLD 1
-+#define SPI_DELAY_RETRY 10
-+
-+struct spi_qup_device {
-+ int select;
-+ u16 mode;
-+};
-+
-+struct spi_qup {
-+ void __iomem *base;
-+ struct device *dev;
-+ struct clk *cclk; /* core clock */
-+ struct clk *iclk; /* interface clock */
-+ int irq;
-+ u32 max_speed_hz;
-+ spinlock_t lock;
-+
-+ int in_fifo_sz;
-+ int out_fifo_sz;
-+ int in_blk_sz;
-+ int out_blk_sz;
-+
-+ struct spi_transfer *xfer;
-+ struct completion done;
-+ int error;
-+ int w_size; /* bytes per SPI word */
-+ int tx_bytes;
-+ int rx_bytes;
-+};
-+
-+
-+static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
-+{
-+ u32 opstate = readl_relaxed(controller->base + QUP_STATE);
-+
-+ return opstate & QUP_STATE_VALID;
-+}
-+
-+static int spi_qup_set_state(struct spi_qup *controller, u32 state)
-+{
-+ unsigned long loop;
-+ u32 cur_state;
-+
-+ loop = 0;
-+ while (!spi_qup_is_valid_state(controller)) {
-+
-+ usleep_range(SPI_DELAY_THRESHOLD, SPI_DELAY_THRESHOLD * 2);
-+
-+ if (++loop > SPI_DELAY_RETRY)
-+ return -EIO;
-+ }
-+
-+ if (loop)
-+ dev_dbg(controller->dev, "invalid state for %ld,us %d\n",
-+ loop, state);
-+
-+ cur_state = readl_relaxed(controller->base + QUP_STATE);
-+ /*
-+ * Per spec: for PAUSE_STATE to RESET_STATE, two writes
-+ * of (b10) are required
-+ */
-+ if (((cur_state & QUP_STATE_MASK) == QUP_STATE_PAUSE) &&
-+ (state == QUP_STATE_RESET)) {
-+ writel_relaxed(QUP_STATE_CLEAR, controller->base + QUP_STATE);
-+ writel_relaxed(QUP_STATE_CLEAR, controller->base + QUP_STATE);
-+ } else {
-+ cur_state &= ~QUP_STATE_MASK;
-+ cur_state |= state;
-+ writel_relaxed(cur_state, controller->base + QUP_STATE);
-+ }
-+
-+ loop = 0;
-+ while (!spi_qup_is_valid_state(controller)) {
-+
-+ usleep_range(SPI_DELAY_THRESHOLD, SPI_DELAY_THRESHOLD * 2);
-+
-+ if (++loop > SPI_DELAY_RETRY)
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static void spi_qup_fifo_read(struct spi_qup *controller,
-+ struct spi_transfer *xfer)
-+{
-+ u8 *rx_buf = xfer->rx_buf;
-+ u32 word, state;
-+ int idx, shift, w_size;
-+
-+ w_size = controller->w_size;
-+
-+ while (controller->rx_bytes < xfer->len) {
-+
-+ state = readl_relaxed(controller->base + QUP_OPERATIONAL);
-+ if (0 == (state & QUP_OP_IN_FIFO_NOT_EMPTY))
-+ break;
-+
-+ word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
-+
-+ if (!rx_buf) {
-+ controller->rx_bytes += w_size;
-+ continue;
-+ }
-+
-+ for (idx = 0; idx < w_size; idx++, controller->rx_bytes++) {
-+ /*
-+ * The data format depends on bytes per SPI word:
-+ * 4 bytes: 0x12345678
-+ * 2 bytes: 0x00001234
-+ * 1 byte : 0x00000012
-+ */
-+ shift = BITS_PER_BYTE;
-+ shift *= (w_size - idx - 1);
-+ rx_buf[controller->rx_bytes] = word >> shift;
-+ }
-+ }
-+}
-+
-+static void spi_qup_fifo_write(struct spi_qup *controller,
-+ struct spi_transfer *xfer)
-+{
-+ const u8 *tx_buf = xfer->tx_buf;
-+ u32 word, state, data;
-+ int idx, w_size;
-+
-+ w_size = controller->w_size;
-+
-+ while (controller->tx_bytes < xfer->len) {
-+
-+ state = readl_relaxed(controller->base + QUP_OPERATIONAL);
-+ if (state & QUP_OP_OUT_FIFO_FULL)
-+ break;
-+
-+ word = 0;
-+ for (idx = 0; idx < w_size; idx++, controller->tx_bytes++) {
-+
-+ if (!tx_buf) {
-+ controller->tx_bytes += w_size;
-+ break;
-+ }
-+
-+ data = tx_buf[controller->tx_bytes];
-+ word |= data << (BITS_PER_BYTE * (3 - idx));
-+ }
-+
-+ writel_relaxed(word, controller->base + QUP_OUTPUT_FIFO);
-+ }
-+}
-+
-+static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
-+{
-+ struct spi_qup *controller = dev_id;
-+ struct spi_transfer *xfer;
-+ u32 opflags, qup_err, spi_err;
-+ unsigned long flags;
-+ int error = 0;
-+
-+ spin_lock_irqsave(&controller->lock, flags);
-+ xfer = controller->xfer;
-+ controller->xfer = NULL;
-+ spin_unlock_irqrestore(&controller->lock, flags);
-+
-+ qup_err = readl_relaxed(controller->base + QUP_ERROR_FLAGS);
-+ spi_err = readl_relaxed(controller->base + SPI_ERROR_FLAGS);
-+ opflags = readl_relaxed(controller->base + QUP_OPERATIONAL);
-+
-+ writel_relaxed(qup_err, controller->base + QUP_ERROR_FLAGS);
-+ writel_relaxed(spi_err, controller->base + SPI_ERROR_FLAGS);
-+ writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
-+
-+ if (!xfer) {
-+ dev_err_ratelimited(controller->dev, "unexpected irq %x08 %x08 %x08\n",
-+ qup_err, spi_err, opflags);
-+ return IRQ_HANDLED;
-+ }
-+
-+ if (qup_err) {
-+ if (qup_err & QUP_ERROR_OUTPUT_OVER_RUN)
-+ dev_warn(controller->dev, "OUTPUT_OVER_RUN\n");
-+ if (qup_err & QUP_ERROR_INPUT_UNDER_RUN)
-+ dev_warn(controller->dev, "INPUT_UNDER_RUN\n");
-+ if (qup_err & QUP_ERROR_OUTPUT_UNDER_RUN)
-+ dev_warn(controller->dev, "OUTPUT_UNDER_RUN\n");
-+ if (qup_err & QUP_ERROR_INPUT_OVER_RUN)
-+ dev_warn(controller->dev, "INPUT_OVER_RUN\n");
-+
-+ error = -EIO;
-+ }
-+
-+ if (spi_err) {
-+ if (spi_err & SPI_ERROR_CLK_OVER_RUN)
-+ dev_warn(controller->dev, "CLK_OVER_RUN\n");
-+ if (spi_err & SPI_ERROR_CLK_UNDER_RUN)
-+ dev_warn(controller->dev, "CLK_UNDER_RUN\n");
-+
-+ error = -EIO;
-+ }
-+
-+ if (opflags & QUP_OP_IN_SERVICE_FLAG)
-+ spi_qup_fifo_read(controller, xfer);
-+
-+ if (opflags & QUP_OP_OUT_SERVICE_FLAG)
-+ spi_qup_fifo_write(controller, xfer);
-+
-+ spin_lock_irqsave(&controller->lock, flags);
-+ controller->error = error;
-+ controller->xfer = xfer;
-+ spin_unlock_irqrestore(&controller->lock, flags);
-+
-+ if (controller->rx_bytes == xfer->len || error)
-+ complete(&controller->done);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/* set clock freq ... bits per word */
-+static int spi_qup_io_config(struct spi_qup *controller,
-+ struct spi_qup_device *chip,
-+ struct spi_transfer *xfer)
-+{
-+ u32 config, iomode, mode;
-+ int ret, n_words, w_size;
-+
-+ if (chip->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
-+ dev_err(controller->dev, "too big size for loopback %d > %d\n",
-+ xfer->len, controller->in_fifo_sz);
-+ return -EIO;
-+ }
-+
-+ ret = clk_set_rate(controller->cclk, xfer->speed_hz);
-+ if (ret) {
-+ dev_err(controller->dev, "fail to set frequency %d",
-+ xfer->speed_hz);
-+ return -EIO;
-+ }
-+
-+ if (spi_qup_set_state(controller, QUP_STATE_RESET)) {
-+ dev_err(controller->dev, "cannot set RESET state\n");
-+ return -EIO;
-+ }
-+
-+ w_size = 4;
-+ if (xfer->bits_per_word <= 8)
-+ w_size = 1;
-+ else if (xfer->bits_per_word <= 16)
-+ w_size = 2;
-+
-+ n_words = xfer->len / w_size;
-+ controller->w_size = w_size;
-+
-+ if (n_words <= controller->in_fifo_sz) {
-+ mode = QUP_IO_M_MODE_FIFO;
-+ writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
-+ writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
-+ /* must be zero for FIFO */
-+ writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
-+ writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
-+ } else {
-+ mode = QUP_IO_M_MODE_BLOCK;
-+ writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
-+ writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
-+ /* must be zero for BLOCK and BAM */
-+ writel_relaxed(0, controller->base + QUP_MX_READ_CNT);
-+ writel_relaxed(0, controller->base + QUP_MX_WRITE_CNT);
-+ }
-+
-+ iomode = readl_relaxed(controller->base + QUP_IO_M_MODES);
-+ /* Set input and output transfer mode */
-+ iomode &= ~(QUP_IO_M_INPUT_MODE_MASK | QUP_IO_M_OUTPUT_MODE_MASK);
-+ iomode &= ~(QUP_IO_M_PACK_EN | QUP_IO_M_UNPACK_EN);
-+ iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
-+ iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
-+
-+ writel_relaxed(iomode, controller->base + QUP_IO_M_MODES);
-+
-+ config = readl_relaxed(controller->base + SPI_CONFIG);
-+
-+ if (chip->mode & SPI_LOOP)
-+ config |= SPI_CONFIG_LOOPBACK;
-+ else
-+ config &= ~SPI_CONFIG_LOOPBACK;
-+
-+ if (chip->mode & SPI_CPHA)
-+ config &= ~SPI_CONFIG_INPUT_FIRST;
-+ else
-+ config |= SPI_CONFIG_INPUT_FIRST;
-+
-+ /*
-+ * HS_MODE improves signal stability for spi-clk high rates,
-+ * but is invalid in loop back mode.
-+ */
-+ if ((xfer->speed_hz >= SPI_HS_MIN_RATE) && !(chip->mode & SPI_LOOP))
-+ config |= SPI_CONFIG_HS_MODE;
-+ else
-+ config &= ~SPI_CONFIG_HS_MODE;
-+
-+ writel_relaxed(config, controller->base + SPI_CONFIG);
-+
-+ config = readl_relaxed(controller->base + QUP_CONFIG);
-+ config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
-+ config |= xfer->bits_per_word - 1;
-+ config |= QUP_CONFIG_SPI_MODE;
-+ writel_relaxed(config, controller->base + QUP_CONFIG);
-+
-+ writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
-+ return 0;
-+}
-+
-+static void spi_qup_set_cs(struct spi_device *spi, bool enable)
-+{
-+ struct spi_qup *controller = spi_master_get_devdata(spi->master);
-+ struct spi_qup_device *chip = spi_get_ctldata(spi);
-+
-+ u32 iocontol, mask;
-+
-+ iocontol = readl_relaxed(controller->base + SPI_IO_CONTROL);
-+
-+ /* Disable auto CS toggle and use manual */
-+ iocontol &= ~SPI_IO_C_MX_CS_MODE;
-+ iocontol |= SPI_IO_C_FORCE_CS;
-+
-+ iocontol &= ~SPI_IO_C_CS_SELECT_MASK;
-+ iocontol |= SPI_IO_C_CS_SELECT(chip->select);
-+
-+ mask = SPI_IO_C_CS_N_POLARITY_0 << chip->select;
-+
-+ if (enable)
-+ iocontol |= mask;
-+ else
-+ iocontol &= ~mask;
-+
-+ writel_relaxed(iocontol, controller->base + SPI_IO_CONTROL);
-+}
-+
-+static int spi_qup_transfer_one(struct spi_master *master,
-+ struct spi_device *spi,
-+ struct spi_transfer *xfer)
-+{
-+ struct spi_qup *controller = spi_master_get_devdata(master);
-+ struct spi_qup_device *chip = spi_get_ctldata(spi);
-+ unsigned long timeout, flags;
-+ int ret = -EIO;
-+
-+ ret = spi_qup_io_config(controller, chip, xfer);
-+ if (ret)
-+ return ret;
-+
-+ timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
-+ timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
-+ timeout = 100 * msecs_to_jiffies(timeout);
-+
-+ reinit_completion(&controller->done);
-+
-+ spin_lock_irqsave(&controller->lock, flags);
-+ controller->xfer = xfer;
-+ controller->error = 0;
-+ controller->rx_bytes = 0;
-+ controller->tx_bytes = 0;
-+ spin_unlock_irqrestore(&controller->lock, flags);
-+
-+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
-+ dev_warn(controller->dev, "cannot set RUN state\n");
-+ goto exit;
-+ }
-+
-+ if (spi_qup_set_state(controller, QUP_STATE_PAUSE)) {
-+ dev_warn(controller->dev, "cannot set PAUSE state\n");
-+ goto exit;
-+ }
-+
-+ spi_qup_fifo_write(controller, xfer);
-+
-+ if (spi_qup_set_state(controller, QUP_STATE_RUN)) {
-+ dev_warn(controller->dev, "cannot set EXECUTE state\n");
-+ goto exit;
-+ }
-+
-+ if (!wait_for_completion_timeout(&controller->done, timeout))
-+ ret = -ETIMEDOUT;
-+exit:
-+ spi_qup_set_state(controller, QUP_STATE_RESET);
-+ spin_lock_irqsave(&controller->lock, flags);
-+ controller->xfer = NULL;
-+ if (!ret)
-+ ret = controller->error;
-+ spin_unlock_irqrestore(&controller->lock, flags);
-+ return ret;
-+}
-+
-+static int spi_qup_setup(struct spi_device *spi)
-+{
-+ struct spi_qup *controller = spi_master_get_devdata(spi->master);
-+ struct spi_qup_device *chip = spi_get_ctldata(spi);
-+
-+ if (spi->chip_select >= spi->master->num_chipselect) {
-+ dev_err(controller->dev, "invalid chip_select %d\n",
-+ spi->chip_select);
-+ return -EINVAL;
-+ }
-+
-+ if (spi->max_speed_hz > controller->max_speed_hz) {
-+ dev_err(controller->dev, "invalid max_speed_hz %d\n",
-+ spi->max_speed_hz);
-+ return -EINVAL;
-+ }
-+
-+ if (!chip) {
-+ /* First setup */
-+ chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-+ if (!chip) {
-+ dev_err(controller->dev, "no memory for chip data\n");
-+ return -ENOMEM;
-+ }
-+
-+ chip->mode = spi->mode;
-+ chip->select = spi->chip_select;
-+ spi_set_ctldata(spi, chip);
-+ }
-+
-+ return 0;
-+}
-+
-+static void spi_qup_cleanup(struct spi_device *spi)
-+{
-+ struct spi_qup_device *chip = spi_get_ctldata(spi);
-+
-+ if (!chip)
-+ return;
-+
-+ spi_set_ctldata(spi, NULL);
-+ kfree(chip);
-+}
-+
-+static int spi_qup_probe(struct platform_device *pdev)
-+{
-+ struct spi_master *master;
-+ struct clk *iclk, *cclk;
-+ struct spi_qup *controller;
-+ struct resource *res;
-+ struct device *dev;
-+ void __iomem *base;
-+ u32 data, max_freq, iomode;
-+ int ret, irq, size;
-+
-+ dev = &pdev->dev;
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ irq = platform_get_irq(pdev, 0);
-+
-+ if (irq < 0)
-+ return irq;
-+
-+ cclk = devm_clk_get(dev, "core");
-+ if (IS_ERR(cclk))
-+ return PTR_ERR(cclk);
-+
-+ iclk = devm_clk_get(dev, "iface");
-+ if (IS_ERR(iclk))
-+ return PTR_ERR(iclk);
-+
-+ /* This is optional parameter */
-+ if (of_property_read_u32(dev->of_node, "spi-max-frequency", &max_freq))
-+ max_freq = SPI_MAX_RATE;
-+
-+ if (!max_freq || max_freq > SPI_MAX_RATE) {
-+ dev_err(dev, "invalid clock frequency %d\n", max_freq);
-+ return -ENXIO;
-+ }
-+
-+ ret = clk_prepare_enable(cclk);
-+ if (ret) {
-+ dev_err(dev, "cannot enable core clock\n");
-+ return ret;
-+ }
-+
-+ ret = clk_prepare_enable(iclk);
-+ if (ret) {
-+ clk_disable_unprepare(cclk);
-+ dev_err(dev, "cannot enable iface clock\n");
-+ return ret;
-+ }
-+
-+ data = readl_relaxed(base + QUP_HW_VERSION);
-+
-+ if (data < QUP_HW_VERSION_2_1_1) {
-+ clk_disable_unprepare(cclk);
-+ clk_disable_unprepare(iclk);
-+ dev_err(dev, "v.%08x is not supported\n", data);
-+ return -ENXIO;
-+ }
-+
-+ master = spi_alloc_master(dev, sizeof(struct spi_qup));
-+ if (!master) {
-+ clk_disable_unprepare(cclk);
-+ clk_disable_unprepare(iclk);
-+ dev_err(dev, "cannot allocate master\n");
-+ return -ENOMEM;
-+ }
-+
-+ master->bus_num = pdev->id;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
-+ master->num_chipselect = SPI_NUM_CHIPSELECTS;
-+ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
-+ master->setup = spi_qup_setup;
-+ master->cleanup = spi_qup_cleanup;
-+ master->set_cs = spi_qup_set_cs;
-+ master->transfer_one = spi_qup_transfer_one;
-+ master->dev.of_node = pdev->dev.of_node;
-+ master->auto_runtime_pm = true;
-+
-+ platform_set_drvdata(pdev, master);
-+
-+ controller = spi_master_get_devdata(master);
-+
-+ controller->dev = dev;
-+ controller->base = base;
-+ controller->iclk = iclk;
-+ controller->cclk = cclk;
-+ controller->irq = irq;
-+ controller->max_speed_hz = max_freq;
-+
-+ spin_lock_init(&controller->lock);
-+ init_completion(&controller->done);
-+
-+ iomode = readl_relaxed(base + QUP_IO_M_MODES);
-+
-+ size = QUP_IO_M_OUTPUT_BLOCK_SIZE(iomode);
-+ if (size)
-+ controller->out_blk_sz = size * 16;
-+ else
-+ controller->out_blk_sz = 4;
-+
-+ size = QUP_IO_M_INPUT_BLOCK_SIZE(iomode);
-+ if (size)
-+ controller->in_blk_sz = size * 16;
-+ else
-+ controller->in_blk_sz = 4;
-+
-+ size = QUP_IO_M_OUTPUT_FIFO_SIZE(iomode);
-+ controller->out_fifo_sz = controller->out_blk_sz * (2 << size);
-+
-+ size = QUP_IO_M_INPUT_FIFO_SIZE(iomode);
-+ controller->in_fifo_sz = controller->in_blk_sz * (2 << size);
-+
-+ dev_info(dev, "v.%08x IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
-+ data, controller->in_blk_sz, controller->in_fifo_sz,
-+ controller->out_blk_sz, controller->out_fifo_sz);
-+
-+ writel_relaxed(1, base + QUP_SW_RESET);
-+
-+ ret = spi_qup_set_state(controller, QUP_STATE_RESET);
-+ if (ret) {
-+ dev_err(dev, "cannot set RESET state\n");
-+ goto error;
-+ }
-+
-+ writel_relaxed(0, base + QUP_OPERATIONAL);
-+ writel_relaxed(0, base + QUP_IO_M_MODES);
-+ writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
-+ writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN,
-+ base + SPI_ERROR_FLAGS_EN);
-+
-+ writel_relaxed(0, base + SPI_CONFIG);
-+ writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
-+
-+ ret = devm_request_irq(dev, irq, spi_qup_qup_irq,
-+ IRQF_TRIGGER_HIGH, pdev->name, controller);
-+ if (ret)
-+ goto error;
-+
-+ ret = devm_spi_register_master(dev, master);
-+ if (ret)
-+ goto error;
-+
-+ pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC);
-+ pm_runtime_use_autosuspend(dev);
-+ pm_runtime_set_active(dev);
-+ pm_runtime_enable(dev);
-+ return 0;
-+
-+error:
-+ clk_disable_unprepare(cclk);
-+ clk_disable_unprepare(iclk);
-+ spi_master_put(master);
-+ return ret;
-+}
-+
-+#ifdef CONFIG_PM_RUNTIME
-+static int spi_qup_pm_suspend_runtime(struct device *device)
-+{
-+ struct spi_master *master = dev_get_drvdata(device);
-+ struct spi_qup *controller = spi_master_get_devdata(master);
-+ u32 config;
-+
-+ /* Enable clocks auto gaiting */
-+ config = readl(controller->base + QUP_CONFIG);
-+ config |= QUP_CLOCK_AUTO_GATE;
-+ writel_relaxed(config, controller->base + QUP_CONFIG);
-+ return 0;
-+}
-+
-+static int spi_qup_pm_resume_runtime(struct device *device)
-+{
-+ struct spi_master *master = dev_get_drvdata(device);
-+ struct spi_qup *controller = spi_master_get_devdata(master);
-+ u32 config;
-+
-+ /* Disable clocks auto gaiting */
-+ config = readl_relaxed(controller->base + QUP_CONFIG);
-+ config &= ~QUP_CLOCK_AUTO_GATE;
-+ writel_relaxed(config, controller->base + QUP_CONFIG);
-+ return 0;
-+}
-+#endif /* CONFIG_PM_RUNTIME */
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int spi_qup_suspend(struct device *device)
-+{
-+ struct spi_master *master = dev_get_drvdata(device);
-+ struct spi_qup *controller = spi_master_get_devdata(master);
-+ int ret;
-+
-+ ret = spi_master_suspend(master);
-+ if (ret)
-+ return ret;
-+
-+ ret = spi_qup_set_state(controller, QUP_STATE_RESET);
-+ if (ret)
-+ return ret;
-+
-+ clk_disable_unprepare(controller->cclk);
-+ clk_disable_unprepare(controller->iclk);
-+ return 0;
-+}
-+
-+static int spi_qup_resume(struct device *device)
-+{
-+ struct spi_master *master = dev_get_drvdata(device);
-+ struct spi_qup *controller = spi_master_get_devdata(master);
-+ int ret;
-+
-+ ret = clk_prepare_enable(controller->iclk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(controller->cclk);
-+ if (ret)
-+ return ret;
-+
-+ ret = spi_qup_set_state(controller, QUP_STATE_RESET);
-+ if (ret)
-+ return ret;
-+
-+ return spi_master_resume(master);
-+}
-+#endif /* CONFIG_PM_SLEEP */
-+
-+static int spi_qup_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master = dev_get_drvdata(&pdev->dev);
-+ struct spi_qup *controller = spi_master_get_devdata(master);
-+ int ret;
-+
-+ ret = pm_runtime_get_sync(&pdev->dev);
-+ if (ret)
-+ return ret;
-+
-+ ret = spi_qup_set_state(controller, QUP_STATE_RESET);
-+ if (ret)
-+ return ret;
-+
-+ clk_disable_unprepare(controller->cclk);
-+ clk_disable_unprepare(controller->iclk);
-+
-+ pm_runtime_put_noidle(&pdev->dev);
-+ pm_runtime_disable(&pdev->dev);
-+ spi_master_put(master);
-+ return 0;
-+}
-+
-+static struct of_device_id spi_qup_dt_match[] = {
-+ { .compatible = "qcom,spi-qup-v2.1.1", },
-+ { .compatible = "qcom,spi-qup-v2.2.1", },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, spi_qup_dt_match);
-+
-+static const struct dev_pm_ops spi_qup_dev_pm_ops = {
-+ SET_SYSTEM_SLEEP_PM_OPS(spi_qup_suspend, spi_qup_resume)
-+ SET_RUNTIME_PM_OPS(spi_qup_pm_suspend_runtime,
-+ spi_qup_pm_resume_runtime,
-+ NULL)
-+};
-+
-+static struct platform_driver spi_qup_driver = {
-+ .driver = {
-+ .name = "spi_qup",
-+ .owner = THIS_MODULE,
-+ .pm = &spi_qup_dev_pm_ops,
-+ .of_match_table = spi_qup_dt_match,
-+ },
-+ .probe = spi_qup_probe,
-+ .remove = spi_qup_remove,
-+};
-+module_platform_driver(spi_qup_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_VERSION("0.4");
-+MODULE_ALIAS("platform:spi_qup");