diff options
author | Alberto Bursi <alberto.bursi@outlook.it> | 2017-02-06 11:40:52 +0100 |
---|---|---|
committer | Felix Fietkau <nbd@nbd.name> | 2017-02-11 21:16:28 +0100 |
commit | 4383c13aee8963ee93ca1950e7f0ea5a35309ab4 (patch) | |
tree | 08429fcda96d5beb22be21f7fa3380029155b0b7 /target/linux/kirkwood/base-files/etc/board.d/01_leds | |
parent | add1dd00813ccccfe5f1ee8e6bf04db7822b9fd5 (diff) | |
download | upstream-4383c13aee8963ee93ca1950e7f0ea5a35309ab4.tar.gz upstream-4383c13aee8963ee93ca1950e7f0ea5a35309ab4.tar.bz2 upstream-4383c13aee8963ee93ca1950e7f0ea5a35309ab4.zip |
kirkwood: add ZyXEL NSA325 device
This patch add ZyXEL NSA325 2-Bay Media Server
The ZyXEL NSA325 device is a Kirkwood based NAS:
- SoC: Marvell 88F6702 1600Mhz
- SDRAM memory: 512MB DDR2 400Mhz
- Gigabit ethernet: Marvell Alaska
- Flash memory: 128MB
- 1 Power button
- 1 Power LED (blue)
- 5 Status LED (green/red)
- 1 Copy/Sync button
- 1 Reset button
- 2 SATA II ports (internal)
- 2 USB 2.0 ports (back)
- 1 USB 3.0 port (front)
- Fan (fixed speed)
- hardware watchdog in a mcu
Basically a bigger, more powerful version of NSA310,
installation is the same as they share the same flash layout.
A notable difference is that there is a hardware watchdog
in a mcu on the board, which is disabled by default in the LEDE u-boot.
The watchdog is also disabled with a GPIO activation through
raw register change when kwbooting or it would reset the board before
the new uboot was transferred.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [remove dead code]
Diffstat (limited to 'target/linux/kirkwood/base-files/etc/board.d/01_leds')
-rwxr-xr-x | target/linux/kirkwood/base-files/etc/board.d/01_leds | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds index 4518fc4b64..e6da9fd49a 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/01_leds +++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds @@ -41,6 +41,9 @@ case "$board" in "nsa310b") ucidef_set_led_default "health" "health" "nsa310:green:sys" "1" ;; +"nsa325") + ucidef_set_led_default "health" "health" "nsa325:green:sys" "1" + ;; "sheevaplug" | \ "sheevaplug-esata") ucidef_set_led_timer "health" "health" "sheevaplug:blue:health" "200" "800" |