diff options
author | Pawel Dembicki <paweldembicki@gmail.com> | 2020-04-20 10:06:36 +0200 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-04-28 16:49:31 +0200 |
commit | 4fd7e539e4f90128bdd7cb71c729a4b32f5de86e (patch) | |
tree | 74caf584970ce1d8c1b5c6604e2c228d3a97faea /target/linux/kirkwood/base-files/etc/board.d/02_network | |
parent | 4b3b8ec81cd1965d0bd548fa31db491295b83354 (diff) | |
download | upstream-4fd7e539e4f90128bdd7cb71c729a4b32f5de86e.tar.gz upstream-4fd7e539e4f90128bdd7cb71c729a4b32f5de86e.tar.bz2 upstream-4fd7e539e4f90128bdd7cb71c729a4b32f5de86e.zip |
kirkwood: switch from swconfig to dsa
This patch removes support for swconfig and switches to dsa driver.
swconfig and switch drivers are removed. DSA driver is enabled and
configuration is adjusted.
In kirkwood only two devices have switches: Linksys EA3500 and EA4500.
WAN MAC configuration in 02_network is required because otherwise WAN
would have the same MAC address as lan interfaces. In swconfig solution
the WAN address was assigned in u-Boot to eth1. Now, as eth1 is disabled
and wan is part of the switch, we have to set it manually.
Compile tested: EA3500, EA4500
Run tested: EA4500
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[minor commit title/message adjustments, remove swconfig package
for devices]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/kirkwood/base-files/etc/board.d/02_network')
-rwxr-xr-x | target/linux/kirkwood/base-files/etc/board.d/02_network | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network index 15e51d88f2..df01b0bb1b 100755 --- a/target/linux/kirkwood/base-files/etc/board.d/02_network +++ b/target/linux/kirkwood/base-files/etc/board.d/02_network @@ -26,8 +26,8 @@ case "$board" in ;; "linksys,audi"|\ "linksys,viper") - ucidef_add_switch "switch0" \ - "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1" + ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet" + ucidef_set_interface_macaddr "wan" $( mtd_get_mac_ascii u_env eth1addr ) ;; "zyxel,nsa310b"|\ "zyxel,nsa325") |