kirkwood: remove support for kernel 4.14

kirkwood has moved to DSA on 5.4, which will make kernel 4.14 and 4.19
support broken on the affected devices.
Support on kernel 5.4 seems to have been running fine for almost 2 months
on multiple devices.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Pawel Dembicki <paweldembicki@gmail.com>

1 files changed, 0 insertions, 124 deletions

diff --git a/target/linux/kirkwood/files-4.14/arch/arm/boot/dts/kirkwood-goflexhome.dts b/target/linux/kirkwood/files-4.14/arch/arm/boot/dts/kirkwood-goflexhome.dts
deleted file mode 100644
index af20cf9e2c..0000000000
--- a/target/linux/kirkwood/files-4.14/arch/arm/boot/dts/kirkwood-goflexhome.dts
+++ /dev/null
@@ -1,124 +0,0 @@
-/dts-v1/;
-
-#include "kirkwood.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Seagate GoFlex Home";
-	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
-	aliases {
-		led-boot = &led_health;
-		led-failsafe = &led_fault;
-		led-running = &led_health;
-		led-upgrade = &led_fault;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x8000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-		stdout-path = &uart0;
-	};
-
-	ocp@f1000000 {
-		pinctrl: pin-controller@10000 {
-			pmx_usb_power_enable: pmx-usb-power-enable {
-				marvell,pins = "mpp29";
-				marvell,function = "gpio";
-			};
-			pmx_led_white: pmx-led-white {
-				marvell,pins = "mpp40";
-				marvell,function = "gpio";
-			};
-			pmx_led_green: pmx-led_green {
-				marvell,pins = "mpp46";
-				marvell,function = "gpio";
-			};
-			pmx_led_orange: pmx-led-orange {
-				marvell,pins = "mpp47";
-				marvell,function = "gpio";
-			};
-		};
-		serial@12000 {
-			status = "ok";
-		};
-
-		sata@80000 {
-			status = "okay";
-			nr-ports = <2>;
-		};
-
-	};
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		led_health: health {
-			label = "status:green:health";
-			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-			default-state = "on";
-		};
-		led_fault: fault {
-			label = "status:orange:fault";
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-		};
-		misc {
-			label = "status:white:misc";
-			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "disk-activity";
-		};
-	};
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&pmx_usb_power_enable>;
-		pinctrl-names = "default";
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-		};
-	};
-};
-
-&nand {
-	chip-delay = <40>;
-	status = "okay";
-
-	partition@0 {
-		label = "u-boot";
-		reg = <0x0000000 0x100000>;
-		read-only;
-	};
-
-	partition@100000 {
-		label = "ubi";
-		reg = <0x100000 0x0ff00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@0 {
-		reg = <0>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};