diff options
author | Johann Neuhauser <johann@it-neuhauser.de> | 2018-05-17 19:12:35 +0200 |
---|---|---|
committer | Mathias Kresin <dev@kresin.me> | 2018-07-18 19:17:46 +0200 |
commit | 02d53e6a2113f80ae429664e7990d167fbf44604 (patch) | |
tree | 839b9680b321fa840fa3bdfaaaeedaf10e4335bf /target/linux/lantiq/falcon | |
parent | f2f7802148f3d070b27f65b169efebfc6bf8286d (diff) | |
download | upstream-02d53e6a2113f80ae429664e7990d167fbf44604.tar.gz upstream-02d53e6a2113f80ae429664e7990d167fbf44604.tar.bz2 upstream-02d53e6a2113f80ae429664e7990d167fbf44604.zip |
lantiq: add support for FritzBox 7312
The FritzBox 7312 is also known as 1&1 WLAN-MODEM. The device is almost
the same as FB7330, but only one ETH-Port and no USB.
Hardware
SoC: Lantiq Xway ARX188 PSB 50812 EL
RAM: 64MB DDR1 (Zentel A4S12D40FTP-G5)
Ethernet: Atheros 8030
Wireless: Atheros AR9227 b/g/n 2x2
DSL: Lantiq ADSL2+
DECT: Dialog SC14441
Buttons: WiFi, DECT
LEDs: Power/DSL, Fon, DECT, WLAN, Info
LEDs
Power: GPIO#44 (active low)
Internet: GPIO#47 (active low)
DECT: GPIO#38 (active low)
WLAN: GPIO#37 (active low)
Info: GPIO#35 (active low)
The Fon LED is labeled as internet in avm gpl sources.
Buttons
WLAN: GPIO#1 (active low)
DECT: GPIO#2 (active low)
Phy
GPIO#03: 25 MHz
GPIO#34: Reset (active low)
GPIO#39: Int
GPIO#42: MII MDIO
GPIO#43: MII MDC
PCIe
GPIO#21: reset (active low)
Installation:
To install OpenWrt via Eva bootloader, within the first seconds after
power on a ftp connection need to be established to the FRITZ!Box at
192.168.178.1 and the the following ftp commands need to be run:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put /path/to/openwrt-lantiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1
ftp> quote REBOOT
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
Diffstat (limited to 'target/linux/lantiq/falcon')
0 files changed, 0 insertions, 0 deletions