lantiq: kernel 4.14: update dts files

Updated the devicetree source files to make use of the following
upstreamed drivers:

 - xrx200 ethernet phy
 - reset controller unit
 - dwc2
 - fpi

Use our custom xrx200 ethernet phy compatible to support boards, which
have switched the vr9 revision during lifetime, with a single devicetree
source file.

By switching to the dwc2 driver + usb phy framework, we don't need to used
our custom gpio power patch and can use a fixed regulator instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Mathias Kresin <dev@kresin.me>

1 files changed, 9 insertions, 7 deletions

diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts
index 2257d21d7b..bb001cb219 100644
--- a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts
+++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts
@@ -3,6 +3,7 @@
 #include "vr9.dtsi"
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/mips/lantiq_rcu_gphy.h>
 
 / {
 	compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
@@ -24,13 +25,6 @@
 		reg = <0x0 0x2000000>;
 	};
 
-	gphy-xrx200 {
-		compatible = "lantiq,phy-xrx200";
-		firmware1 = "lantiq/xrx200_phy11g_a14.bin";	/*VR9 1.1*/
-		firmware2 = "lantiq/xrx200_phy11g_a22.bin";	/*VR9 1.2*/
-		phys = [ 00 01 ];
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -109,6 +103,14 @@
 	};
 };
 
+&gphy0 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
+&gphy1 {
+	lantiq,gphy-mode = <GPHY_MODE_GE>;
+};
+
 &gpio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&state_default>;