lantiq: use soc_vendor_device scheme on DTS file

This renames lantiq DTS(I) files to follow soc_vendor_device scheme.
This will make DTS files easier to maintain.

As a side effect, DTS file name can be derived from device node
names now, only having to specify a SOC variable in Makefiles.

While at it, move files to arch/mips/boot/dts/lantiq subfolder.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 112 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts
deleted file mode 100644
index 67b0f9631f..0000000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/ACMP252.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-/ {
-	compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube";
-	model = "AudioCodes MediaPack MP-252";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 3 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		exin {
-			lantiq,groups = "exin1";
-			lantiq,function = "exin";
-		};
-	};
-};
-
-&gsw {
-	phy-mode = "rmii";
-};
-
-&localbus {
-	flash@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x2000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x0 0x20000>;
-				read-only;
-			};
-
-			partition@20000 {
-				label = "uboot_env";
-				reg = <0x20000 0x20000>;
-			};
-
-			partition@40000 {
-				label = "boardconfig";
-				reg = <0x40000 0x60000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "firmware";
-				reg = <0xa0000 0xf20000>;
-			};
-
-			partition@fc0000 {
-				label = "sysconfig";
-				reg = <0xfc0000 0x40000>;
-			};
-
-			partition@1000000 {
-				label = "rootfs_data";
-				reg = <0x1000000 0x1000000>;
-			};
-		};
-	};
-};
-
-&pci0 {
-	status = "okay";
-
-	pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
-	pinctrl-names = "default";
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
-	status = "okay";
-	gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
-};