lantiq: copy target to kernel 4.19

This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 209 insertions, 0 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7510PW22.dts
new file mode 100644
index 0000000000..92d01b4dcc
--- /dev/null
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7510PW22.dts
@@ -0,0 +1,209 @@
+/dts-v1/;
+
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube";
+	model = "Astoria Networks ARV7510PW22";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+	};
+
+	aliases {
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+
+		led-dsl = &internet;
+		led-usb = &umts;
+		led-wifi = &wlan;
+	};
+
+	memory@0 {
+		reg = <0x0 0x4000000>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		rfkill {
+			label = "rfkill";
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RFKILL>;
+		};
+		restart {
+			label = "restart";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		power: power {
+			label = "power";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+		internet: internet {
+			label = "internet";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+		wlan: wlan {
+			label = "wlan";
+			gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		umts: 3g {
+			label = "3g";
+			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+		};
+		message {
+			label = "message";
+			gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_default>;
+
+	state_default: pinmux {
+		exin {
+			lantiq,groups = "exin1";
+			lantiq,function = "exin";
+			lantiq,pull = <2>;
+			lantiq,output = <0>;
+		};
+		pci_in {
+			lantiq,groups = "req1", "req2";
+			lantiq,function = "pci";
+			lantiq,open-drain = <1>;
+			lantiq,pull = <2>;
+			lantiq,output = <0>;
+		};
+		pci_out {
+			lantiq,groups = "gnt1";
+			lantiq,function = "pci";
+			lantiq,output = <1>;
+		};
+		pci_rst {
+			lantiq,pins = "io21";
+			lantiq,pull = <2>;
+			lantiq,output = <1>;
+		};
+		pins_out {
+			lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
+			lantiq,output = <1>;
+		};
+		pins_in {
+			lantiq,pins = "io11", "io12", "io28";
+			lantiq,open-drain = <1>;
+			lantiq,pull = <2>;
+			lantiq,output = <0>;
+		};
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB_VBUS";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gsw {
+	/* Switch reset 19 */
+	phy-mode = "mii";
+	mtd-mac-address = <&boardconfig 0x16>;
+};
+
+&localbus {
+	nor@0 {
+		compatible = "lantiq,nor";
+		bank-width = <2>;
+		reg = <0 0x0 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x00000 0x40000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "uboot_env";
+				reg = <0x40000 0x20000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "firmware";
+				reg = <0x60000 0xf80000>;
+			};
+
+			boardconfig: partition@fe0000 {
+				label = "board_config";
+				reg = <0xfe0000 0x20000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&pci0 {
+	status = "okay";
+	lantiq,external-clock;
+	interrupt-map = <
+		0x7000 0 0 1 &icu0 30
+		0x7800 0 0 1 &icu0 135
+		0x7800 0 0 2 &icu0 135
+		0x7800 0 0 3 &icu0 135
+	>;
+	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
+	req-mask = <0x3>;
+
+	wifi@1814,3592 {
+		compatible = "pci1814,3592";
+		reg = <0x7000 0 0 0 0>;
+		ralink,mtd-eeprom = <&boardconfig 0x410>;
+		ralink,mtd-eeprom-swap;
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb {
+	status = "okay";
+	vbus-supply = <&usb_vbus>;
+};
+
+&vmmc {
+	status = "okay";
+	gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+};