lantiq: use soc_vendor_device scheme on DTS file

This renames lantiq DTS(I) files to follow soc_vendor_device scheme.
This will make DTS files easier to maintain.

As a side effect, DTS file name can be derived from device node
names now, only having to specify a SOC variable in Makefiles.

While at it, move files to arch/mips/boot/dts/lantiq subfolder.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 233 deletions

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts
deleted file mode 100644
index ae0d27a042..0000000000
--- a/target/linux/lantiq/files/arch/mips/boot/dts/ARV7518PW.dts
+++ /dev/null
@@ -1,233 +0,0 @@
-/dts-v1/;
-
-#include "danube.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube";
-	model = "Astoria Networks ARV7518PW";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200";
-	};
-
-	aliases {
-		led-boot = &power_green;
-		led-failsafe = &power_red;
-		led-running = &power_green;
-		led-upgrade = &power_green;
-
-		led-dsl = &dsl;
-		led-internet = &online_green;
-		led-usb = &led_usb;
-		led-wifi = &wifi;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x4000000>;
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		rfkill {
-			label = "rfkill";
-			gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RFKILL>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		power_green: power {
-			label = "arv7518pw:green:power";
-			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-			default-state = "keep";
-		};
-		dsl: dsl {
-			label = "arv7518pw:green:dsl";
-			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-		};
-		online_green: online {
-			label = "arv7518pw:green:internet";
-			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-		};
-		wifi: wifi {
-			label = "arv7518pw:green:wlan";
-			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-		};
-		power_red: power2 {
-			label = "arv7518pw:red:power";
-			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-		};
-		online2 {
-			label = "arv7518pw:red:internet";
-			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-		};
-		led_usb: usb {
-			label = "arv7518pw:green:usb";
-			gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-		};
-		voice {
-			label = "arv7518pw:green:voip";
-			gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
-		};
-		fxs1 {
-			label = "arv7518pw:green:phone1";
-			gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
-		};
-		fxs2 {
-			label = "arv7518pw:green:phone2";
-			gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
-		};
-		unlabeled {
-			label = "arv7518pw:amber:unlabeled";
-			gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
-		};
-		wps {
-			label = "arv7518pw:amber:wps";
-			gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
-		};
-		wps2 {
-			label = "arv7518pw:green:wps";
-			gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
-		};
-		wps3 {
-			label = "arv7518pw:red:wps";
-			gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&gpio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&state_default>;
-
-	state_default: pinmux {
-		ebu {
-			lantiq,groups = "ebu cs1";
-			lantiq,function = "ebu";
-		};
-		pci_rst {
-			lantiq,pins = "io21";
-			lantiq,pull = <2>;
-			lantiq,output = <1>;
-		};
-		leds {
-			lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19";
-			lantiq,output = <1>;
-		};
-		keys {
-			lantiq,pins = "io28", "io30";
-			lantiq,output = <0>;
-			lantiq,pull = <2>;
-			lantiq,open-drain = <1>;
-		};
-	};
-
-	usb_vbus: regulator-usb-vbus {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB_VBUS";
-
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-};
-
-/*
-#define SWITCH_RESET          13
-*/
-&gsw {
-	phy-mode = "mii";
-	mtd-mac-address = <&boardconfig 0x16>;
-};
-
-&localbus {
-	flash@0 {
-		compatible = "lantiq,nor";
-		bank-width = <2>;
-		reg = <0 0x0 0x2000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "uboot";
-				reg = <0x00000 0x10000>;
-				read-only;
-			};
-
-			partition@10000 {
-				label = "uboot_env";
-				reg = <0x10000 0x10000>;
-			};
-
-			partition@20000 {
-				label = "firmware";
-				reg = <0x20000 0x7d0000>;
-			};
-
-			boardconfig: partition@400000 {
-				label = "boardconfig";
-				reg = <0x7f0000 0x10000>;
-				read-only;
-			};
-		};
-	};
-
-	gpiomm: gpio@1 {
-		compatible = "lantiq,gpio-mm";
-		reg = <1 0x0 0x10 >;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		lantiq,shadow = <0x0>;
-	};
-};
-
-&pci0 {
-	status = "okay";
-
-	pinctrl-0 = <&pci_gnt1_pins>, <&pci_req1_pins>;
-	pinctrl-names = "default";
-
-	gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
-	lantiq,external-clock;
-	req-mask = <0xf>;
-
-	wifi@168c,0029 {
-		compatible = "pci168c,0029";
-		reg = <0x7000 0 0 0 0>;
-		qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
-		mtd-mac-address = <&boardconfig 0x16>;
-		mtd-mac-address-increment = <1>;
-	};
-};
-
-&usb_phy {
-	status = "okay";
-};
-
-&usb {
-	status = "okay";
-	vbus-supply = <&usb_vbus>;
-};
-
-&vmmc {
-	status = "okay";
-};