diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2020-08-13 11:15:56 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-08-25 16:42:21 +0200 |
| commit | 81ac2a73bc227484888a2a715f8e4e2e8043804e (patch) | |
| tree | 5303e17e76da1ab3fb6ba5a164020ab62f4b5f6d /target/linux/layerscape/README | |
| parent | e12ac405525c29a6b6195e6259d769715919560c (diff) | |
| download | upstream-81ac2a73bc227484888a2a715f8e4e2e8043804e.tar.gz upstream-81ac2a73bc227484888a2a715f8e4e2e8043804e.tar.bz2 upstream-81ac2a73bc227484888a2a715f8e4e2e8043804e.zip | |
layerscape: add flashing manual for LS1012FRDM
LS1012FRDM is supported but there's no flashing instruction in README.
This patch adds it.
While at it, add a missing saveenv for MAC address setup.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[add comment about saveenv]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/layerscape/README')
| -rw-r--r-- | target/linux/layerscape/README | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/target/linux/layerscape/README b/target/linux/layerscape/README index 951f3e8984..8cbf05bd15 100644 --- a/target/linux/layerscape/README +++ b/target/linux/layerscape/README @@ -71,6 +71,16 @@ from SD card. 3.2 Program firmware.bin to flash --------------------------------- +* LS1012FRDM (QSPI flash) + Board have only one nor flash bank. Those commands will replace stock + bootloader and firmware. Please refer point 4 for MAC recovery. + + => tftp a0000000 <firmware_name>-firmware.bin + => sf probe 0:0 + => sf erase 0 +$filesize + => sf write a0000000 0 $filesize + => reset + * LS1012ARDB (QSPI flash) Start up from bank1, and program firmware to bank2 with below commands. Switch to bank2 to start up OpenWrt. @@ -155,6 +165,7 @@ from SD card. => setenv ethaddr 00:04:9F:04:65:4b => setenv eth1addr 00:04:9F:04:65:4c + => saveenv 5. Other references |