mediatek: mt7623: rename gen_banana_pi_img.sh → gen_mtk_mmc_img.sh

As I buy more hardware and continue to work on consolidation, This will
apply to a lot of MediaTek platforms; rename it accordingly.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

1 files changed, 0 insertions, 150 deletions

diff --git a/target/linux/mediatek/image/gen_banana_pi_img.sh b/target/linux/mediatek/image/gen_banana_pi_img.sh
deleted file mode 100755
index 611a17edff..0000000000
--- a/target/linux/mediatek/image/gen_banana_pi_img.sh
+++ /dev/null
@@ -1,150 +0,0 @@
-#!/bin/sh
-#
-# Copyright © 2019 Alexey Loukianov <lx2@lexa2.ru>
-# Copyright © 2020 David Woodhouse <dwmw2@infradead.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-# Generates a bootable SD card image for Banana Pi R2 (and probably
-# other similar boards) as documented at
-# http://www.fw-web.de/dokuwiki/doku.php?id=en:bpi-r2:storage
-#
-# The first sector must contain the SDMMC_BOOT header shown
-# below, and also contains the MBR partition table in the end
-# of the sector. The partition table must contain no active
-# partitions.
-#
-# The second sector must contain the BRLYT header, and the
-# special preloader image goes in sector 4; 2KiB into the image.
-#
-# The preloader loads U-Boot from  sector 640; 320KiB into the image.
-# The location and the size (512KiB) are fixed and not read from
-# the partition table. We set up a partition for it merely for
-# our own convenience for upgrades, etc.
-#
-# The second partition is a FAT file system containing the kernel
-# image and a uboot.env file, which is provided to this script as
-# $4 (bootfs image). Its size is configurable with the
-# CONFIG_BANANA_PI_BOOT_PARTSIZE option; by default 32MiB.
-#
-# The root filesystem comes next in the third partition.
-#
-#
-#   ------------------------   Sector   Offset
-#   |  MBR + SDMMC_BOOT    |     0       0x0
-#   |----------------------|
-#   |     BRLYT header     |     1       0x200
-#   |----------------------|
-#   .                      .
-#   .                      .
-#   |----------------------|
-#   |                      |     4       0x800
-#   |                      |
-#   |     Preloader        |
-#   .                      .
-#   .                      .
-#   |                      |     639
-#   |----------------------|
-#   |   MBR partition #1   |     640     0x50000
-#   |                      |
-#   |       U-Boot         |
-#   .                      .
-#   .                      .
-#   |                      |     1663
-#   |----------------------|
-#   |   MBR partition #2   |
-#   |                      |
-#   |    FAT partition     |   ( BANANA_PI_BOOT_PARTSIZE
-#   .                      .     default 32MiB )
-#   .    (kernel, uEnv)    .
-#   |                      |
-#   |----------------------|
-#   |   MBR partition #3   |
-#   |                      |
-#   |   Root partition     |
-#   |                      |   ( TARGET_ROOTFS_PARTSIZE
-#   |  (squashfs+overlay   |     default 104MiB )
-#   .    or ext4, etc.)    .
-#   .                      .
-#   |                      |
-#   ------------------------
-#
-# For eMMC boot, everything up to and including the preloader must be
-# written to /dev/mmcblk0boot0, with the SDMMC_BOOT header changed to
-# read EMMC_BOOT\0 instead.
-#
-# The contents of the main eMMC are identical to the SD card layout,
-# with the preloader loading 512KiB of U-Boot starting at 0x50000.
-
-usage() {
-    echo "SYNTAX: $0 sd <file> <preloader image> <u-boot image> <u-boot offset> <bootfs image> <rootfs image> <bootfs size> <rootfs size>"
-    echo " OR:    $0 emmc <file> <preloader image>"
-    exit 1
-}
-
-set -e
-
-PRELOADER_OFFSET=2     # 2KiB
-
-SDMMC_BOOT="SDMMC_BOOT\x00\x00\x01\x00\x00\x00\x00\x02\x00\x00"
-EMMC_BOOT="EMMC_BOOT\x00\x00\x00\x01\x00\x00\x00\x00\x02\x00\x00"
-BRLYT="BRLYT\x00\x00\x00\x01\x00\x00\x00\x00\x08\x00\x00\
-\x00\x08\x00\x00\x42\x42\x42\x42\x08\x00\x01\x00\x00\x08\x00\x00\
-\x00\x08\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"
-
-case $1 in
- sd)
-	[ $# -eq 9 ] || usage
-	OUTPUT="$2"
-	PRELOADER="$3"
-	UBOOT="$4"
-	UBOOTOFS="$5"
-	BOOTFS="$6"
-	ROOTFS="$7"
-	BOOTFSSIZE="$8"
-	ROOTFSSIZE="$9"
-
-	head=4
-	sect=63
-
-	set $(ptgen -o $OUTPUT -h $head -s $sect -a 0 -l 1024 \
-		    -t 41 -p 512k@${UBOOTOFS} \
-		    -t c -p ${BOOTFSSIZE}M \
-		    -t 83 -p ${ROOTFSSIZE}M )
-
-	UBOOT_OFFSET="$(($1 / 512))"
-	UBOOT_SIZE="$(($2 / 512))"
-	BOOTFS_OFFSET="$(($3 / 512))"
-	BOOTFS_SIZE="$(($4 / 512))"
-	ROOTFS_OFFSET="$(($5 / 512))"
-	ROOTFS_SIZE="$(($6 / 512))"
-
-	echo -en "${SDMMC_BOOT}" | dd bs=1 of="${OUTPUT}" seek=0   conv=notrunc
-	echo -en "${BRLYT}"      | dd bs=1 of="${OUTPUT}" seek=512 conv=notrunc
-
-	# For eMMC-only boards like U7623 the preloader doesn't need to be included in the
-	# main image as it's only ever needed in the eMMC boot partition.
-	if [ -r ${PRELOADER} ]; then
-	    dd bs=1024 if="${PRELOADER}" of="${OUTPUT}" seek="${PRELOADER_OFFSET}" conv=notrunc
-	fi
-	dd bs=512  if="${UBOOT}"     of="${OUTPUT}" seek="${UBOOT_OFFSET}"     conv=notrunc
-	dd bs=512  if="${BOOTFS}"    of="${OUTPUT}" seek="${BOOTFS_OFFSET}"    conv=notrunc
-	dd bs=512  if="${ROOTFS}"    of="${OUTPUT}" seek="${ROOTFS_OFFSET}"    conv=notrunc
-	dd bs=128k if=/dev/zero      of="${OUTPUT}" count=1    oflag=append    conv=notrunc
-	;;
- emmc)
-	[ $# -eq 3 ] || usage
-	OUTPUT="$2"
-	PRELOADER="$3"
-
-	echo -en "${EMMC_BOOT}"  | dd bs=1 of="${OUTPUT}" seek=0
-	echo -en "${BRLYT}"      | dd bs=1 of="${OUTPUT}" seek=512 conv=notrunc
-
-	dd bs=1024 if="${PRELOADER}" of="${OUTPUT}" seek="${PRELOADER_OFFSET}" conv=notrunc
-	;;
- *)
-	usage
-	;;
-esac