diff options
| author | John Marrett <johnf@zioncluster.ca> | 2021-06-08 12:57:28 -0400 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2021-08-05 01:48:17 +0200 |
| commit | 252466a0ced3ec9f58b213ffd34a900fe3834cab (patch) | |
| tree | 05ef28e494dd1f7653b2018c93e9f3b3f29be592 /target/linux/mediatek/mt7622 | |
| parent | 13d6d27422da7efa2f6c731cf742ffd1bdbb2561 (diff) | |
| download | upstream-252466a0ced3ec9f58b213ffd34a900fe3834cab.tar.gz upstream-252466a0ced3ec9f58b213ffd34a900fe3834cab.tar.bz2 upstream-252466a0ced3ec9f58b213ffd34a900fe3834cab.zip | |
ath79: add support for GL.iNet GL-X300B
The GL-X300B is a industrial 4G LTE router based on the Qualcomm
QCA9531 SoC.
Specifications:
- Qualcomm QCA9531 @ 650 MHz
- 128 MB of RAM
- 16 MB of SPI NOR FLASH
- 2x 10/100 Mbps Ethernet
- 2.4GHz 802.11b/g/n
- 1x USB 2.0 (vbus driven by GPIO)
- 4x LED, driven by GPIO
- 1x button (reset)
- 1x mini pci-e slot (vcc driven by GPIO)
- RS-485 Serial Port (untested)
Flash instructions:
This firmware can be flashed using either sysupgrade from the GL.iNet
firmware or the recovery console as follows:
- Press and hold the reset button
- Connect power to the router, wait five seconds
- Manually configure 192.168.1.2/24 on your computer, connect to
192.168.1.1
- Upload the firmware image using the web interface
RS-485 serial port is untested and may depend on the following commit in
the GL.iNet repo:
https://github.com/gl-inet/openwrt/commit/202e83a32ae308fbb70502b6dbe3bb0bf8b1fba9
MAC addresses as verified by OEM firmware:
vendor OpenWrt address
WAN eth0 label
LAN eth1 label + 1
2g phy0 label + 2
The label MAC address was found in the art partition at 0x0
Based on vendor commit:
https://github.com/gl-inet/openwrt/commit/16c5708b207eb76ff19a040dc973e560d3d8074b
Signed-off-by: John Marrett <johnf@zioncluster.ca>
Diffstat (limited to 'target/linux/mediatek/mt7622')
0 files changed, 0 insertions, 0 deletions