diff options
| author | John Audia <graysky@archlinux.us> | 2020-09-10 15:17:13 -0400 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-09-12 01:28:50 +0200 |
| commit | bee76f1bfa13a1dad8706090a5b6a1dd36f3d9c1 (patch) | |
| tree | ba288a8a4922007a82ede6b45292c88154044914 /target/linux/mediatek/patches-5.4 | |
| parent | c4110a524e9a026cf570b6dadf325c037b7527d0 (diff) | |
| download | upstream-bee76f1bfa13a1dad8706090a5b6a1dd36f3d9c1.tar.gz upstream-bee76f1bfa13a1dad8706090a5b6a1dd36f3d9c1.tar.bz2 upstream-bee76f1bfa13a1dad8706090a5b6a1dd36f3d9c1.zip | |
kernel: bump 5.4 to 5.4.64
Remove upstreamed patches:
generic-backport
701-v5.5-net-core-use-listified-Rx-for-GRO_NORMAL-in-napi_gro.patch
Manually merged:
mediatek/patches-5.4
0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch
All other modifications made by update_kernel.sh
Build-tested: ipq806x, lantiq/xrx200, mvebu, x86/64
Run-tested: ipq806x (R7800), mvebu (mamba, rango),
lantiq/xrx200 (Easybox 904 xDSL), x86/64
No dmesg regressions, everything functional
Signed-off-by: John Audia <graysky@archlinux.us>
[add community build/run tests to commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/mediatek/patches-5.4')
7 files changed, 18 insertions, 18 deletions
diff --git a/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch b/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch index b545ea809d..bf16062cb7 100644 --- a/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch +++ b/target/linux/mediatek/patches-5.4/0310-dts-add-wmac-support-for-mt7622-rfb1.patch @@ -1,6 +1,6 @@ --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -712,6 +712,17 @@ +@@ -714,6 +714,17 @@ status = "disabled"; }; diff --git a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch index 34a15334d6..a9b2b603bb 100644 --- a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch +++ b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch @@ -199,10 +199,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> + * @duplex: link duplex + * @tx_pause: link transmit pause enablement status + * @rx_pause: link receive pause enablement status - * -- * If @mode is not an in-band negotiation mode (as defined by -- * phylink_autoneg_inband()), allow the link to come up. If @phy -- * is non-%NULL, configure Energy Efficient Ethernet by calling ++ * + * Configure the MAC for an established link. + * + * @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link @@ -214,7 +211,10 @@ Signed-off-by: David S. Miller <davem@davemloft.net> + * Note that when 802.3z in-band negotiation is in use, it is possible + * that the user wishes to override the pause settings, and this should + * be allowed when considering the implementation of this method. -+ * + * +- * If @mode is not an in-band negotiation mode (as defined by +- * phylink_autoneg_inband()), allow the link to come up. If @phy +- * is non-%NULL, configure Energy Efficient Ethernet by calling + * If in-band negotiation mode is disabled, allow the link to come up. If + * @phy is non-%NULL, configure Energy Efficient Ethernet by calling * phy_init_eee() and perform appropriate MAC configuration for EEE. diff --git a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch index 30ce641486..ae153847dc 100644 --- a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch +++ b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch @@ -102,8 +102,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> { struct mt7530_priv *priv = ds->priv; + u32 mcr; - -- mt7530_port_set_status(priv, port, 1); ++ + mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; + + switch (speed) { @@ -125,7 +124,8 @@ Signed-off-by: David S. Miller <davem@davemloft.net> + if (rx_pause) + mcr |= PMCR_RX_FC_EN; + } -+ + +- mt7530_port_set_status(priv, port, 1); + mt7530_set(priv, MT7530_PMCR_P(port), mcr); } diff --git a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch index 5ae3376290..b86c5b8283 100644 --- a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch +++ b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch @@ -257,7 +257,7 @@ Signed-off-by: Sean Wang <sean.wang@mediatek.com> phylink_set(mask, 100baseT_Full); - - if (state->interface != PHY_INTERFACE_MODE_MII) { -- phylink_set(mask, 1000baseT_Half); +- /* This switch only supports 1G full-duplex. */ - phylink_set(mask, 1000baseT_Full); - if (port == 5) - phylink_set(mask, 1000baseX_Full); diff --git a/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch b/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch index bc0f7b1a6c..3283746e30 100644 --- a/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch +++ b/target/linux/mediatek/patches-5.4/0993-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch @@ -281,7 +281,7 @@ Signed-off-by: chuanjia.liu <Chuanjia.Liu@mediatek.com> &pio { --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -790,45 +790,41 @@ +@@ -792,45 +792,41 @@ #reset-cells = <1>; }; @@ -344,7 +344,7 @@ Signed-off-by: chuanjia.liu <Chuanjia.Liu@mediatek.com> interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc0 0>, <0 0 0 2 &pcie_intc0 1>, -@@ -840,15 +836,39 @@ +@@ -842,15 +838,39 @@ #interrupt-cells = <1>; }; }; diff --git a/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch b/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch index 50b5e59697..cc104927d8 100644 --- a/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch +++ b/target/linux/mediatek/patches-5.4/1011-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch @@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> interface-type = "ace"; reg = <0x5000 0x1000>; }; -@@ -965,6 +965,8 @@ +@@ -967,6 +967,8 @@ power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; mediatek,ethsys = <ðsys>; mediatek,sgmiisys = <&sgmiisys>; diff --git a/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch b/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch index 5f55fe0c03..c24126284b 100644 --- a/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch +++ b/target/linux/mediatek/patches-5.4/1012-pci-pcie-mediatek-add-support-for-coherent-DMA.patch @@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi -@@ -801,6 +801,8 @@ +@@ -803,6 +803,8 @@ reg = <0 0x1a143000 0 0x1000>; reg-names = "port0"; mediatek,pcie-cfg = <&pciecfg>; @@ -19,7 +19,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> #address-cells = <3>; #size-cells = <2>; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; -@@ -818,6 +820,7 @@ +@@ -820,6 +822,7 @@ bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; status = "disabled"; @@ -27,7 +27,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> slot0: pcie@0,0 { reg = <0x0000 0 0 0 0>; -@@ -844,6 +847,8 @@ +@@ -846,6 +849,8 @@ reg = <0 0x1a145000 0 0x1000>; reg-names = "port1"; mediatek,pcie-cfg = <&pciecfg>; @@ -36,7 +36,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> #address-cells = <3>; #size-cells = <2>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; -@@ -862,6 +867,7 @@ +@@ -864,6 +869,7 @@ bus-range = <0x00 0xff>; ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; status = "disabled"; @@ -44,7 +44,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> slot1: pcie@1,0 { reg = <0x0800 0 0 0 0>; -@@ -921,6 +927,11 @@ +@@ -923,6 +929,11 @@ }; }; |