aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@nbd.name>2020-09-07 17:47:15 +0200
committerFelix Fietkau <nbd@nbd.name>2020-09-09 11:51:47 +0200
commitc18a872825c8dd27a398e4f5b2f98c9b5066d8a9 (patch)
tree84346bfe67bfeb7c3d72bc806e6979297b24d9a0 /target/linux/mediatek
parentd8104c83535634906a4f3bd92f2e59c7fa7ceefd (diff)
downloadupstream-c18a872825c8dd27a398e4f5b2f98c9b5066d8a9.tar.gz
upstream-c18a872825c8dd27a398e4f5b2f98c9b5066d8a9.tar.bz2
upstream-c18a872825c8dd27a398e4f5b2f98c9b5066d8a9.zip
mediatek: backport the latest version of the mt7531 support patches
Fixes unknown unicast flooding issue Signed-off-by: Felix Fietkau <nbd@nbd.name>
Diffstat (limited to 'target/linux/mediatek')
-rw-r--r--target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch98
-rw-r--r--target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch441
-rw-r--r--target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch179
-rw-r--r--target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch1096
-rw-r--r--target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch138
-rw-r--r--target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch246
-rw-r--r--target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch143
-rw-r--r--target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch145
-rw-r--r--target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch458
-rw-r--r--target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch1510
-rw-r--r--target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch71
11 files changed, 2573 insertions, 1952 deletions
diff --git a/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch b/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch
deleted file mode 100644
index 5288751e50..0000000000
--- a/target/linux/mediatek/patches-5.4/0600-1-6-net-dsa-mt7530-Refine-message-in-Kconfig.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From patchwork Tue Dec 10 08:14:37 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com>
-X-Patchwork-Id: 1206962
-X-Patchwork-Delegate: davem@davemloft.net
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Original-To: patchwork-incoming-netdev@ozlabs.org
-Delivered-To: patchwork-incoming-netdev@ozlabs.org
-Authentication-Results: ozlabs.org; spf=none (no SPF record)
- smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67;
- helo=vger.kernel.org;
- envelope-from=netdev-owner@vger.kernel.org;
- receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none)
- header.from=mediatek.com
-Authentication-Results: ozlabs.org; dkim=pass (1024-bit key;
- unprotected) header.d=mediatek.com header.i=@mediatek.com
- header.b="pTp2PPKi"; dkim-atps=neutral
-Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
- by ozlabs.org (Postfix) with ESMTP id 47XCY42hJqz9sRf
- for <patchwork-incoming-netdev@ozlabs.org>;
- Tue, 10 Dec 2019 19:15:20 +1100 (AEDT)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
- id S1727061AbfLJIO5 (ORCPT
- <rfc822;patchwork-incoming-netdev@ozlabs.org>);
- Tue, 10 Dec 2019 03:14:57 -0500
-Received: from mailgw02.mediatek.com ([210.61.82.184]:45567 "EHLO
- mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by
- vger.kernel.org with ESMTP id S1726932AbfLJIO4 (ORCPT
- <rfc822;netdev@vger.kernel.org>); Tue, 10 Dec 2019 03:14:56 -0500
-X-UUID: f5656f2ff80846ebb40e3da87d60fb90-20191210
-DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
- d=mediatek.com; s=dk;
- h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From;
- bh=THbuVAlbiUyMgTyO0rwrKX/mskzsxNwDv9gxXp2O2c8=;
- b=pTp2PPKiPwR8QPOOf5yohf9lFERpEDlo/g/t2ChREfzFb9c+wylx++/div4hAB337+Ja2KIzbSu4URgdj5XHXUly8yuxrD8OBvV+ox0jlNLiRIN2dkCgL4fyzPr7ZPSk9lObJW05Yx2LY6Jy6eJZZXSShLlqLd0lDKwy6FT+hSI=;
-X-UUID: f5656f2ff80846ebb40e3da87d60fb90-20191210
-Received: from mtkcas07.mediatek.inc [(172.21.101.84)] by
- mailgw02.mediatek.com (envelope-from <landen.chao@mediatek.com>)
- (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS)
- with ESMTP id 565263134; Tue, 10 Dec 2019 16:14:47 +0800
-Received: from mtkcas08.mediatek.inc (172.21.101.126) by
- mtkmbs07n1.mediatek.inc (172.21.101.16) with Microsoft SMTP Server
- (TLS) id 15.0.1395.4; Tue, 10 Dec 2019 16:14:38 +0800
-Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas08.mediatek.inc
- (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via
- Frontend Transport; Tue, 10 Dec 2019 16:14:26 +0800
-From: Landen Chao <landen.chao@mediatek.com>
-To: <andrew@lunn.ch>, <f.fainelli@gmail.com>,
- <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>,
- <robh+dt@kernel.org>, <mark.rutland@arm.com>
-CC: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
- <linux-kernel@vger.kernel.org>,
- <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>,
- <sean.wang@mediatek.com>, <opensource@vdorst.com>,
- <frank-w@public-files.de>, Landen Chao <landen.chao@mediatek.com>
-Subject: [PATCH net-next 1/6] net: dsa: mt7530: Refine message in Kconfig
-Date: Tue, 10 Dec 2019 16:14:37 +0800
-Message-ID: <6ecf6cbf38223f35854bc361c2eefa1d85c724d2.1575914275.git.landen.chao@mediatek.com>
-X-Mailer: git-send-email 2.18.0
-In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
-References: <cover.1575914275.git.landen.chao@mediatek.com>
-MIME-Version: 1.0
-X-MTK: N
-Sender: netdev-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-
-Refine message in Kconfig with fixing typo and an explicit MT7621 support.
-
-Signed-off-by: Landen Chao <landen.chao@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/net/dsa/Kconfig | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
- the xrx200 / VR9 SoC.
-
- config NET_DSA_MT7530
-- tristate "Mediatek MT7530 Ethernet switch support"
-+ tristate "MediaTek MT7530 and MT7621 Ethernet switch support"
- depends on NET_DSA
- select NET_DSA_TAG_MTK
- ---help---
-- This enables support for the Mediatek MT7530 Ethernet switch
-- chip.
-+ This enables support for the MediaTek MT7530 and MT7621 Ethernet
-+ switch chip.
-
- config NET_DSA_MV88E6060
- tristate "Marvell 88E6060 ethernet switch chip support"
diff --git a/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch b/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch
deleted file mode 100644
index c4b117dcb7..0000000000
--- a/target/linux/mediatek/patches-5.4/0600-2-6-net-dsa-mt7530-Extend-device-data-ready-for-adding-a-new-hardware.patch
+++ /dev/null
@@ -1,441 +0,0 @@
-From patchwork Tue Dec 10 08:14:38 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com>
-X-Patchwork-Id: 1206963
-X-Patchwork-Delegate: davem@davemloft.net
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Original-To: patchwork-incoming-netdev@ozlabs.org
-Delivered-To: patchwork-incoming-netdev@ozlabs.org
-Authentication-Results: ozlabs.org; spf=none (no SPF record)
- smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67;
- helo=vger.kernel.org;
- envelope-from=netdev-owner@vger.kernel.org;
- receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none)
- header.from=mediatek.com
-Authentication-Results: ozlabs.org; dkim=pass (1024-bit key;
- unprotected) header.d=mediatek.com header.i=@mediatek.com
- header.b="UJ5NATux"; dkim-atps=neutral
-Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
- by ozlabs.org (Postfix) with ESMTP id 47XCY92tBkz9sR7
- for <patchwork-incoming-netdev@ozlabs.org>;
- Tue, 10 Dec 2019 19:15:25 +1100 (AEDT)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
- id S1727003AbfLJIO4 (ORCPT
- <rfc822;patchwork-incoming-netdev@ozlabs.org>);
- Tue, 10 Dec 2019 03:14:56 -0500
-Received: from mailgw02.mediatek.com ([210.61.82.184]:45567 "EHLO
- mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by
- vger.kernel.org with ESMTP id S1726071AbfLJIOy (ORCPT
- <rfc822;netdev@vger.kernel.org>); Tue, 10 Dec 2019 03:14:54 -0500
-X-UUID: a18674d7b33c423e9e67b7440f4771cf-20191210
-DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
- d=mediatek.com; s=dk;
- h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From;
- bh=c2C/fEHYw/8uqadmiP2m2xa2hsUpAd52urXVJTPlYck=;
- b=UJ5NATuxMtqHln5i6BTpWiLnxGKgWvp4DpRsKVO2xdnz2cJaT4XL8F/T5fK3CTF4nAai0EKPAcqp+rr8eCLq7uURJv5e5h+ZIzKLSAB4zgnchXesQLo0uFS8vs5w2yp49j6bez1z3v/uN+1+Lpq0uYid9awCqzvbnovrooEysu4=;
-X-UUID: a18674d7b33c423e9e67b7440f4771cf-20191210
-Received: from mtkcas09.mediatek.inc [(172.21.101.178)] by
- mailgw02.mediatek.com (envelope-from <landen.chao@mediatek.com>)
- (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS)
- with ESMTP id 1965641267; Tue, 10 Dec 2019 16:14:46 +0800
-Received: from mtkcas08.mediatek.inc (172.21.101.126) by
- mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server
- (TLS) id 15.0.1395.4; Tue, 10 Dec 2019 16:14:31 +0800
-Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas08.mediatek.inc
- (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via
- Frontend Transport; Tue, 10 Dec 2019 16:14:26 +0800
-From: Landen Chao <landen.chao@mediatek.com>
-To: <andrew@lunn.ch>, <f.fainelli@gmail.com>,
- <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>,
- <robh+dt@kernel.org>, <mark.rutland@arm.com>
-CC: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
- <linux-kernel@vger.kernel.org>,
- <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>,
- <sean.wang@mediatek.com>, <opensource@vdorst.com>,
- <frank-w@public-files.de>, Landen Chao <landen.chao@mediatek.com>
-Subject: [PATCH net-next 2/6] net: dsa: mt7530: Extend device data ready for
- adding a new hardware
-Date: Tue, 10 Dec 2019 16:14:38 +0800
-Message-ID: <2d546d6bb15ff8b4b75af2220e20db4e634f4145.1575914275.git.landen.chao@mediatek.com>
-X-Mailer: git-send-email 2.18.0
-In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
-References: <cover.1575914275.git.landen.chao@mediatek.com>
-MIME-Version: 1.0
-X-MTK: N
-Sender: netdev-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-
-Add a structure holding required operations for each device such as device
-initialization, PHY port read or write, a checker whether PHY interface is
-supported on a certain port, MAC port setup for either bus pad or a
-specific PHY interface.
-
-The patch is done for ready adding a new hardware MT7531.
-
-Signed-off-by: Landen Chao <landen.chao@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- drivers/net/dsa/mt7530.c | 231 +++++++++++++++++++++++++++++----------
- drivers/net/dsa/mt7530.h | 29 ++++-
- 2 files changed, 203 insertions(+), 57 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -373,7 +373,7 @@ mt7530_fdb_write(struct mt7530_priv *pri
- }
-
- static int
--mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
-+mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t mode)
- {
- struct mt7530_priv *priv = ds->priv;
- u32 ncpo1, ssc_delta, trgint, i, xtal;
-@@ -1355,13 +1355,111 @@ mt7530_setup(struct dsa_switch *ds)
- return 0;
- }
-
--static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
-+static bool mt7530_phy_supported(struct dsa_switch *ds, int port,
-+ const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ switch (port) {
-+ case 0: /* Internal phy */
-+ case 1:
-+ case 2:
-+ case 3:
-+ case 4:
-+ if (state->interface != PHY_INTERFACE_MODE_GMII)
-+ goto unsupported;
-+ break;
-+ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-+ if (!phy_interface_mode_is_rgmii(state->interface) &&
-+ state->interface != PHY_INTERFACE_MODE_MII &&
-+ state->interface != PHY_INTERFACE_MODE_GMII)
-+ goto unsupported;
-+ break;
-+ case 6: /* 1st cpu port */
-+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
-+ state->interface != PHY_INTERFACE_MODE_TRGMII)
-+ goto unsupported;
-+ break;
-+ default:
-+ dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
-+ port);
-+ goto unsupported;
-+ }
-+
-+ return true;
-+
-+unsupported:
-+ return false;
-+}
-+
-+static bool mt753x_phy_supported(struct dsa_switch *ds, int port,
-+ const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ return priv->info->phy_supported(ds, port, state);
-+}
-+
-+static int
-+mt7530_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ /* Setup TX circuit incluing relevant PAD and driving */
-+ mt7530_pad_clk_setup(ds, state->interface);
-+
-+ if (priv->id == ID_MT7530) {
-+ /* Setup RX circuit, relevant PAD and driving on the
-+ * host which must be placed after the setup on the
-+ * device side is all finished.
-+ */
-+ mt7623_pad_clk_setup(ds);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ return priv->info->pad_setup(ds, state);
-+}
-+
-+static int
-+mt7530_mac_setup(struct dsa_switch *ds, int port, unsigned int mode,
-+ const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ /* Only need to setup port5. */
-+ if (port != 5)
-+ return 0;
-+
-+ mt7530_setup_port5(priv->ds, state->interface);
-+
-+ return 0;
-+}
-+
-+static int mt753x_mac_setup(struct dsa_switch *ds, int port, unsigned int mode,
-+ const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ return priv->info->mac_setup(ds, port, mode, state);
-+}
-+
-+static void mt753x_phylink_mac_config(struct dsa_switch *ds, int port,
- unsigned int mode,
- const struct phylink_link_state *state)
- {
- struct mt7530_priv *priv = ds->priv;
- u32 mcr_cur, mcr_new;
-
-+ if (!mt753x_phy_supported(ds, port, state))
-+ return;
-+
- switch (port) {
- case 0: /* Internal phy */
- case 1:
-@@ -1374,24 +1472,15 @@ static void mt7530_phylink_mac_config(st
- case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
- if (priv->p5_interface == state->interface)
- break;
-- if (!phy_interface_mode_is_rgmii(state->interface) &&
-- state->interface != PHY_INTERFACE_MODE_MII &&
-- state->interface != PHY_INTERFACE_MODE_GMII)
-- return;
--
-- mt7530_setup_port5(ds, state->interface);
-+ if (mt753x_mac_setup(ds, port, mode, state) < 0)
-+ goto unsupported;
- break;
- case 6: /* 1st cpu port */
- if (priv->p6_interface == state->interface)
- break;
--
-- if (state->interface != PHY_INTERFACE_MODE_RGMII &&
-- state->interface != PHY_INTERFACE_MODE_TRGMII)
-- return;
--
-- /* Setup TX circuit incluing relevant PAD and driving */
-- mt7530_pad_clk_setup(ds, state->interface);
--
-+ mt753x_pad_setup(ds, state);
-+ if (mt753x_mac_setup(ds, port, mode, state) < 0)
-+ goto unsupported;
- priv->p6_interface = state->interface;
- break;
- default:
-@@ -1459,38 +1548,14 @@ static void mt7530_phylink_mac_link_up(s
- mt7530_port_set_status(priv, port, 1);
- }
-
--static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
-+static void mt753x_phylink_validate(struct dsa_switch *ds, int port,
- unsigned long *supported,
- struct phylink_link_state *state)
- {
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-- switch (port) {
-- case 0: /* Internal phy */
-- case 1:
-- case 2:
-- case 3:
-- case 4:
-- if (state->interface != PHY_INTERFACE_MODE_NA &&
-- state->interface != PHY_INTERFACE_MODE_GMII)
-- goto unsupported;
-- break;
-- case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
-- if (state->interface != PHY_INTERFACE_MODE_NA &&
-- !phy_interface_mode_is_rgmii(state->interface) &&
-- state->interface != PHY_INTERFACE_MODE_MII &&
-- state->interface != PHY_INTERFACE_MODE_GMII)
-- goto unsupported;
-- break;
-- case 6: /* 1st cpu port */
-- if (state->interface != PHY_INTERFACE_MODE_NA &&
-- state->interface != PHY_INTERFACE_MODE_RGMII &&
-- state->interface != PHY_INTERFACE_MODE_TRGMII)
-- goto unsupported;
-- break;
-- default:
-- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
--unsupported:
-+ if (state->interface != PHY_INTERFACE_MODE_NA &&
-+ !mt753x_phy_supported(ds, port, state)) {
- linkmode_zero(supported);
- return;
- }
-@@ -1609,12 +1674,36 @@ static int mt7530_set_mac_eee(struct dsa
- return 0;
- }
-
-+static int
-+mt753x_setup(struct dsa_switch *ds)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ return priv->info->setup(ds);
-+}
-+
-+static int
-+mt753x_phy_read(struct dsa_switch *ds, int port, int regnum)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ return priv->info->phy_read(ds, port, regnum);
-+}
-+
-+static int
-+mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ return priv->info->phy_write(ds, port, regnum, val);
-+}
-+
- static const struct dsa_switch_ops mt7530_switch_ops = {
- .get_tag_protocol = mtk_get_tag_protocol,
-- .setup = mt7530_setup,
-+ .setup = mt753x_setup,
- .get_strings = mt7530_get_strings,
-- .phy_read = mt7530_phy_read,
-- .phy_write = mt7530_phy_write,
-+ .phy_read = mt753x_phy_read,
-+ .phy_write = mt753x_phy_write,
- .get_ethtool_stats = mt7530_get_ethtool_stats,
- .get_sset_count = mt7530_get_sset_count,
- .port_enable = mt7530_port_enable,
-@@ -1631,18 +1720,39 @@ static const struct dsa_switch_ops mt753
- .port_vlan_del = mt7530_port_vlan_del,
- .port_mirror_add = mt7530_port_mirror_add,
- .port_mirror_del = mt7530_port_mirror_del,
-- .phylink_validate = mt7530_phylink_validate,
-+ .phylink_validate = mt753x_phylink_validate,
- .phylink_mac_link_state = mt7530_phylink_mac_link_state,
-- .phylink_mac_config = mt7530_phylink_mac_config,
-+ .phylink_mac_config = mt753x_phylink_mac_config,
- .phylink_mac_link_down = mt7530_phylink_mac_link_down,
- .phylink_mac_link_up = mt7530_phylink_mac_link_up,
- .get_mac_eee = mt7530_get_mac_eee,
- .set_mac_eee = mt7530_set_mac_eee,
- };
-
--static const struct of_device_id mt7530_of_match[] = {
-- { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, },
-- { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, },
-+static const struct mt753x_info mt753x_table[] = {
-+ [ID_MT7621] = {
-+ .id = ID_MT7621,
-+ .setup = mt7530_setup,
-+ .phy_read = mt7530_phy_read,
-+ .phy_write = mt7530_phy_write,
-+ .phy_supported = mt7530_phy_supported,
-+ .pad_setup = mt7530_pad_setup,
-+ .mac_setup = mt7530_mac_setup,
-+ },
-+ [ID_MT7530] = {
-+ .id = ID_MT7530,
-+ .setup = mt7530_setup,
-+ .phy_read = mt7530_phy_read,
-+ .phy_write = mt7530_phy_write,
-+ .phy_supported = mt7530_phy_supported,
-+ .pad_setup = mt7530_pad_setup,
-+ .mac_setup = mt7530_mac_setup,
-+ },
-+};
-+
-+ static const struct of_device_id mt7530_of_match[] = {
-+ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
-+ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
- { /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, mt7530_of_match);
-@@ -1680,8 +1790,19 @@ mt7530_probe(struct mdio_device *mdiodev
- /* Get the hardware identifier from the devicetree node.
- * We will need it for some of the clock and regulator setup.
- */
-- priv->id = (unsigned int)(unsigned long)
-- of_device_get_match_data(&mdiodev->dev);
-+ priv->info = of_device_get_match_data(&mdiodev->dev);
-+ if (!priv->info)
-+ return -EINVAL;
-+
-+ /* Sanity check if these required device operstaions are filled
-+ * properly.
-+ */
-+ if (!priv->info->setup || !priv->info->phy_read ||
-+ !priv->info->phy_write || !priv->info->phy_supported ||
-+ !priv->info->pad_setup || !priv->info->mac_setup)
-+ return -EINVAL;
-+
-+ priv->id = priv->info->id;
-
- if (priv->id == ID_MT7530) {
- priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -11,7 +11,7 @@
- #define MT7530_NUM_FDB_RECORDS 2048
- #define MT7530_ALL_MEMBERS 0xff
-
--enum {
-+enum mt753x_id {
- ID_MT7530 = 0,
- ID_MT7621 = 1,
- };
-@@ -447,6 +447,32 @@ static const char *p5_intf_modes(unsigne
- }
- }
-
-+/* struct mt753x_info - This is the main data structure for holding the specific
-+ * part for each supported device
-+ * @setup: Holding the handler to a device initialization
-+ * @phy_read: Holding the way reading PHY port
-+ * @phy_write: Holding the way writing PHY port
-+ * @phy_supported: Check if the PHY type is being supported on a certain
-+ * port
-+ * @pad_setup: Holding the way setting up the bus pad for a certain MAC
-+ * port
-+ * @mac_setup: Holding the way setting up the PHY attribute for a
-+ * certain MAC port
-+ */
-+struct mt753x_info {
-+ enum mt753x_id id;
-+
-+ int (*setup)(struct dsa_switch *ds);
-+ int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
-+ int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
-+ bool (*phy_supported)(struct dsa_switch *ds, int port,
-+ const struct phylink_link_state *state);
-+ int (*pad_setup)(struct dsa_switch *ds,
-+ const struct phylink_link_state *state);
-+ int (*mac_setup)(struct dsa_switch *ds, int port, unsigned int mode,
-+ const struct phylink_link_state *state);
-+};
-+
- /* struct mt7530_priv - This is the main data structure for holding the state
- * of the driver
- * @dev: The device pointer
-@@ -472,6 +498,7 @@ struct mt7530_priv {
- struct regulator *core_pwr;
- struct regulator *io_pwr;
- struct gpio_desc *reset;
-+ const struct mt753x_info *info;
- unsigned int id;
- bool mcm;
- phy_interface_t p6_interface;
diff --git a/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch b/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch
deleted file mode 100644
index b28f23f573..0000000000
--- a/target/linux/mediatek/patches-5.4/0600-3-6-dt-bindings-net-dsa-add-new-MT7531-binding-to-support-MT7531.patch
+++ /dev/null
@@ -1,179 +0,0 @@
-From patchwork Tue Dec 10 08:14:39 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com>
-X-Patchwork-Id: 1206955
-X-Patchwork-Delegate: davem@davemloft.net
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Original-To: patchwork-incoming-netdev@ozlabs.org
-Delivered-To: patchwork-incoming-netdev@ozlabs.org
-Authentication-Results: ozlabs.org; spf=none (no SPF record)
- smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67;
- helo=vger.kernel.org;
- envelope-from=netdev-owner@vger.kernel.org;
- receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none)
- header.from=mediatek.com
-Authentication-Results: ozlabs.org; dkim=pass (1024-bit key;
- unprotected) header.d=mediatek.com header.i=@mediatek.com
- header.b="SuczJHZp"; dkim-atps=neutral
-Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
- by ozlabs.org (Postfix) with ESMTP id 47XCXj3BBNz9sPh
- for <patchwork-incoming-netdev@ozlabs.org>;
- Tue, 10 Dec 2019 19:15:01 +1100 (AEDT)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
- id S1727133AbfLJIPA (ORCPT
- <rfc822;patchwork-incoming-netdev@ozlabs.org>);
- Tue, 10 Dec 2019 03:15:00 -0500
-Received: from mailgw02.mediatek.com ([210.61.82.184]:45567 "EHLO
- mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by
- vger.kernel.org with ESMTP id S1727022AbfLJIO7 (ORCPT
- <rfc822;netdev@vger.kernel.org>); Tue, 10 Dec 2019 03:14:59 -0500
-X-UUID: a1d9a42928d44d63b201d5ad84c05baa-20191210
-DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
- d=mediatek.com; s=dk;
- h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From;
- bh=KJqQ2m7z9H4vre+SZyxgKEGRWb9Edp5pJlYnepJNMyM=;
- b=SuczJHZpeY7vF8UsCGorYUAcT2lEUX2E0ciiyQBS1rDLPzTYnufK8OXyAw5Uq8U1m72TGWYCaq1o0VWtI1meJpEmCL2TVK/d+Y+IaacHlO716BmX77+0MU0crczE8zx1Nz2pNh+GicsB6AoC9qbBU+p5egbKDMBhpRaGQNAeBww=;
-X-UUID: a1d9a42928d44d63b201d5ad84c05baa-20191210
-Received: from mtkcas07.mediatek.inc [(172.21.101.84)] by
- mailgw02.mediatek.com (envelope-from <landen.chao@mediatek.com>)
- (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS)
- with ESMTP id 297826603; Tue, 10 Dec 2019 16:14:47 +0800
-Received: from mtkcas08.mediatek.inc (172.21.101.126) by
- mtkmbs07n1.mediatek.inc (172.21.101.16) with Microsoft SMTP Server
- (TLS) id 15.0.1395.4; Tue, 10 Dec 2019 16:14:38 +0800
-Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas08.mediatek.inc
- (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via
- Frontend Transport; Tue, 10 Dec 2019 16:14:26 +0800
-From: Landen Chao <landen.chao@mediatek.com>
-To: <andrew@lunn.ch>, <f.fainelli@gmail.com>,
- <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>,
- <robh+dt@kernel.org>, <mark.rutland@arm.com>
-CC: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
- <linux-kernel@vger.kernel.org>,
- <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>,
- <sean.wang@mediatek.com>, <opensource@vdorst.com>,
- <frank-w@public-files.de>, Landen Chao <landen.chao@mediatek.com>
-Subject: [PATCH net-next 3/6] dt-bindings: net: dsa: add new MT7531 binding
- to support MT7531
-Date: Tue, 10 Dec 2019 16:14:39 +0800
-Message-ID: <1c382fd916b66bfe3ce8ef18c12f954dbcbddbbc.1575914275.git.landen.chao@mediatek.com>
-X-Mailer: git-send-email 2.18.0
-In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
-References: <cover.1575914275.git.landen.chao@mediatek.com>
-MIME-Version: 1.0
-X-MTK: N
-Sender: netdev-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-
-Add devicetree binding to support the compatible mt7531 switch as used
-in the MediaTek MT7531 switch.
-
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
-Signed-off-by: Landen Chao <landen.chao@mediatek.com>
----
- .../devicetree/bindings/net/dsa/mt7530.txt | 77 ++++++++++++++++++-
- 1 file changed, 74 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
-+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
-@@ -5,6 +5,7 @@ Required properties:
-
- - compatible: may be compatible = "mediatek,mt7530"
- or compatible = "mediatek,mt7621"
-+ or compatible = "mediatek,mt7531"
- - #address-cells: Must be 1.
- - #size-cells: Must be 0.
- - mediatek,mcm: Boolean; if defined, indicates that either MT7530 is the part
-@@ -32,10 +33,13 @@ Required properties for the child nodes
-
- - reg: Port address described must be 6 for CPU port and from 0 to 5 for
- user ports.
--- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
-- "cpu".
-+- phy-mode: String, the follow value would be acceptable for port labeled "cpu"
-+ If compatible mediatek,mt7530 or mediatek,mt7621 is set,
-+ must be either "trgmii" or "rgmii"
-+ If compatible mediatek,mt7531 is set,
-+ must be either "sgmii", "1000base-x" or "2500base-x"
-
--Port 5 of the switch is muxed between:
-+Port 5 of mt7530 and mt7621 switch is muxed between:
- 1. GMAC5: GMAC5 can interface with another external MAC or PHY.
- 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC
- of the SOC. Used in many setups where port 0/4 becomes the WAN port.
-@@ -308,3 +312,70 @@ Example 3: MT7621: Port 5 is connected t
- };
- };
- };
-+
-+Example 4:
-+
-+&eth {
-+ gmac0: mac@0 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+
-+ &mdio0 {
-+ switch@0 {
-+ compatible = "mediatek,mt7531";
-+ reg = <0>;
-+ reset-gpios = <&pio 54 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan0";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan1";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan3";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "wan";
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+ };
-+ };
-+ };
diff --git a/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch b/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
deleted file mode 100644
index 299ac24c79..0000000000
--- a/target/linux/mediatek/patches-5.4/0600-4-6-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
+++ /dev/null
@@ -1,1096 +0,0 @@
-From patchwork Tue Dec 10 08:14:40 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com>
-X-Patchwork-Id: 1206959
-X-Patchwork-Delegate: davem@davemloft.net
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Original-To: patchwork-incoming-netdev@ozlabs.org
-Delivered-To: patchwork-incoming-netdev@ozlabs.org
-Authentication-Results: ozlabs.org; spf=none (no SPF record)
- smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67;
- helo=vger.kernel.org;
- envelope-from=netdev-owner@vger.kernel.org;
- receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none)
- header.from=mediatek.com
-Authentication-Results: ozlabs.org; dkim=pass (1024-bit key;
- unprotected) header.d=mediatek.com header.i=@mediatek.com
- header.b="A6fsNqWU"; dkim-atps=neutral
-Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
- by ozlabs.org (Postfix) with ESMTP id 47XCXz2fDsz9sPh
- for <patchwork-incoming-netdev@ozlabs.org>;
- Tue, 10 Dec 2019 19:15:15 +1100 (AEDT)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
- id S1727198AbfLJIPC (ORCPT
- <rfc822;patchwork-incoming-netdev@ozlabs.org>);
- Tue, 10 Dec 2019 03:15:02 -0500
-Received: from mailgw02.mediatek.com ([210.61.82.184]:39119 "EHLO
- mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by
- vger.kernel.org with ESMTP id S1726750AbfLJIPC (ORCPT
- <rfc822;netdev@vger.kernel.org>); Tue, 10 Dec 2019 03:15:02 -0500
-X-UUID: 38155314c18e497aacbec5bc0f664b9a-20191210
-DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
- d=mediatek.com; s=dk;
- h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From;
- bh=sEkoMPWKI3m+K/8A3kC0uuYTNxZZaGCvfLKvnEmwQQ4=;
- b=A6fsNqWUmjxIiZPLPb43Hs36qwwvYXMLQ/LlU24IcsfBro20uMkDbzGq522r69u0071Qgekwc/zs4yujo0pz40jCfnAo38JIDP73w4ZyVGuOENM5gdE+qNNUednOVSi052hcMRhS7zpVD0Rfl7vKKOU42F7Tl+cadVzjUl0ow/s=;
-X-UUID: 38155314c18e497aacbec5bc0f664b9a-20191210
-Received: from mtkcas09.mediatek.inc [(172.21.101.178)] by
- mailgw02.mediatek.com (envelope-from <landen.chao@mediatek.com>)
- (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS)
- with ESMTP id 452927388; Tue, 10 Dec 2019 16:14:46 +0800
-Received: from mtkcas08.mediatek.inc (172.21.101.126) by
- mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server
- (TLS) id 15.0.1395.4; Tue, 10 Dec 2019 16:14:31 +0800
-Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas08.mediatek.inc
- (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via
- Frontend Transport; Tue, 10 Dec 2019 16:14:26 +0800
-From: Landen Chao <landen.chao@mediatek.com>
-To: <andrew@lunn.ch>, <f.fainelli@gmail.com>,
- <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>,
- <robh+dt@kernel.org>, <mark.rutland@arm.com>
-CC: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
- <linux-kernel@vger.kernel.org>,
- <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>,
- <sean.wang@mediatek.com>, <opensource@vdorst.com>,
- <frank-w@public-files.de>, Landen Chao <landen.chao@mediatek.com>
-Subject: [PATCH net-next 4/6] net: dsa: mt7530: Add the support of MT7531
- switch
-Date: Tue, 10 Dec 2019 16:14:40 +0800
-Message-ID: <6d608dd024edc90b09ba4fe35417b693847f973c.1575914275.git.landen.chao@mediatek.com>
-X-Mailer: git-send-email 2.18.0
-In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
-References: <cover.1575914275.git.landen.chao@mediatek.com>
-MIME-Version: 1.0
-X-MTK: N
-Sender: netdev-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-
-Add new support for MT7531:
-
-MT7531 is the next generation of MT7530. It is also a 7-ports switch with
-5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu
-port 6 only supports HSGMII interface. Cpu port 5 supports either RGMII
-or HSGMII in different HW sku. Due to HSGMII interface support, pll, and
-pad setting are different from MT7530. This patch adds different initial
-setting of MT7531.
-
-Signed-off-by: Landen Chao <landen.chao@mediatek.com>
-Signed-off-by: Sean Wang <sean.wang@mediatek.com>
----
- drivers/net/dsa/Kconfig | 6 +-
- drivers/net/dsa/mt7530.c | 643 ++++++++++++++++++++++++++++++++++++++-
- drivers/net/dsa/mt7530.h | 144 +++++++++
- 3 files changed, 784 insertions(+), 9 deletions(-)
-
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -33,12 +33,12 @@ config NET_DSA_LANTIQ_GSWIP
- the xrx200 / VR9 SoC.
-
- config NET_DSA_MT7530
-- tristate "MediaTek MT7530 and MT7621 Ethernet switch support"
-+ tristate "MediaTek MT753x and MT7621 Ethernet switch support"
- depends on NET_DSA
- select NET_DSA_TAG_MTK
- ---help---
-- This enables support for the MediaTek MT7530 and MT7621 Ethernet
-- switch chip.
-+ This enables support for the MediaTek MT7530, MT7531 and MT7621
-+ Ethernet switch chip.
-
- config NET_DSA_MV88E6060
- tristate "Marvell 88E6060 ethernet switch chip support"
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u
- }
-
- static u32
-+_mt7530_unlocked_read(struct mt7530_dummy_poll *p)
-+{
-+ return mt7530_mii_read(p->priv, p->reg);
-+}
-+
-+static u32
- _mt7530_read(struct mt7530_dummy_poll *p)
- {
- struct mii_bus *bus = p->priv->bus;
-@@ -287,6 +293,102 @@ mt7530_clear(struct mt7530_priv *priv, u
- }
-
- static int
-+mt7531_ind_mmd_phy_read(struct mt7530_priv *priv, int port, int devad,
-+ int regnum)
-+{
-+ struct mii_bus *bus = priv->bus;
-+ struct mt7530_dummy_poll p;
-+ u32 reg, val;
-+ int ret;
-+
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
-+
-+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ reg = MDIO_CL45_ADDR | MDIO_PHY_ADDR(port) | MDIO_DEV_ADDR(devad) |
-+ regnum;
-+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | PHY_ACS_ST);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ reg = MDIO_CL45_READ | MDIO_PHY_ADDR(port) | MDIO_DEV_ADDR(devad);
-+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | PHY_ACS_ST);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ ret = val & MDIO_RW_DATA_MASK;
-+out:
-+ mutex_unlock(&bus->mdio_lock);
-+
-+ return ret;
-+}
-+
-+static int
-+mt7531_ind_mmd_phy_write(struct mt7530_priv *priv, int port, int devad,
-+ int regnum, u32 data)
-+{
-+ struct mii_bus *bus = priv->bus;
-+ struct mt7530_dummy_poll p;
-+ u32 val, reg;
-+ int ret;
-+
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
-+
-+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ reg = MDIO_CL45_ADDR | MDIO_PHY_ADDR(port) | MDIO_DEV_ADDR(devad) |
-+ regnum;
-+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | PHY_ACS_ST);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ reg = MDIO_CL45_WRITE | MDIO_PHY_ADDR(port) | MDIO_DEV_ADDR(devad) |
-+ data;
-+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | PHY_ACS_ST);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+out:
-+ mutex_unlock(&bus->mdio_lock);
-+
-+ return ret;
-+}
-+
-+static int
- mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
- {
- u32 val;
-@@ -516,6 +618,83 @@ static int mt7530_phy_write(struct dsa_s
- return mdiobus_write_nested(priv->bus, port, regnum, val);
- }
-
-+static int
-+mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+ struct mii_bus *bus = priv->bus;
-+ struct mt7530_dummy_poll p;
-+ int ret;
-+ u32 val;
-+
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
-+
-+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ val = MDIO_CL22_READ | MDIO_PHY_ADDR(port) | MDIO_REG_ADDR(regnum);
-+
-+ mt7530_mii_write(priv, MT7531_PHY_IAC, val | PHY_ACS_ST);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
-+ !(val & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ ret = val & MDIO_RW_DATA_MASK;
-+out:
-+ mutex_unlock(&bus->mdio_lock);
-+
-+ return ret;
-+}
-+
-+static int
-+mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum,
-+ u16 data)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+ struct mii_bus *bus = priv->bus;
-+ struct mt7530_dummy_poll p;
-+ int ret;
-+ u32 reg;
-+
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
-+
-+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
-+ !(reg & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+ reg = MDIO_CL22_WRITE | MDIO_PHY_ADDR(port) | MDIO_REG_ADDR(regnum) |
-+ data;
-+
-+ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | PHY_ACS_ST);
-+
-+ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
-+ !(reg & PHY_ACS_ST), 20, 100000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "poll timeout\n");
-+ goto out;
-+ }
-+
-+out:
-+ mutex_unlock(&bus->mdio_lock);
-+
-+ return ret;
-+}
-+
- static void
- mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
- uint8_t *data)
-@@ -1355,6 +1534,86 @@ mt7530_setup(struct dsa_switch *ds)
- return 0;
- }
-
-+static int mt7531_setup(struct dsa_switch *ds)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+ struct mt7530_dummy_poll p;
-+ u32 val, id;
-+ int ret, i;
-+
-+ /* Reset whole chip through gpio pin or memory-mapped registers for
-+ * different type of hardware
-+ */
-+ if (priv->mcm) {
-+ reset_control_assert(priv->rstc);
-+ usleep_range(1000, 1100);
-+ reset_control_deassert(priv->rstc);
-+ } else {
-+ gpiod_set_value_cansleep(priv->reset, 0);
-+ usleep_range(1000, 1100);
-+ gpiod_set_value_cansleep(priv->reset, 1);
-+ }
-+
-+ /* Waiting for MT7530 got to stable */
-+ INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
-+ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
-+ 20, 1000000);
-+ if (ret < 0) {
-+ dev_err(priv->dev, "reset timeout\n");
-+ return ret;
-+ }
-+
-+ id = mt7530_read(priv, MT7531_CREV);
-+ id >>= CHIP_NAME_SHIFT;
-+
-+ if (id != MT7531_ID) {
-+ dev_err(priv->dev, "chip %x can't be supported\n", id);
-+ return -ENODEV;
-+ }
-+
-+ /* Reset the switch through internal reset */
-+ mt7530_write(priv, MT7530_SYS_CTRL,
-+ SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
-+ SYS_CTRL_REG_RST);
-+
-+ priv->p6_interface = PHY_INTERFACE_MODE_NA;
-+
-+ /* Enable PHY power, since phy_device has not yet been created
-+ * provided for phy_[read,write]_mmd_indirect is called, we provide
-+ * our own mt7531_ind_mmd_phy_[read,write] to complete this
-+ * function.
-+ */
-+ val = mt7531_ind_mmd_phy_read(priv, 0, PHY_DEV1F,
-+ MT7531_PHY_DEV1F_REG_403);
-+ val |= MT7531_PHY_EN_BYPASS_MODE;
-+ val &= ~MT7531_PHY_POWER_OFF;
-+ mt7531_ind_mmd_phy_write(priv, 0, PHY_DEV1F,
-+ MT7531_PHY_DEV1F_REG_403, val);
-+
-+ /* Enable and reset MIB counters */
-+ mt7530_mib_reset(ds);
-+
-+ mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK);
-+
-+ for (i = 0; i < MT7530_NUM_PORTS; i++) {
-+ /* Disable forwarding by default on all ports */
-+ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
-+ PCR_MATRIX_CLR);
-+
-+ if (dsa_is_cpu_port(ds, i))
-+ mt7530_cpu_port_enable(priv, i);
-+ else
-+ mt7530_port_disable(ds, i);
-+ }
-+
-+ /* Flush the FDB table */
-+ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
-+ if (ret < 0)
-+ return ret;
-+
-+ return 0;
-+}
-+
- static bool mt7530_phy_supported(struct dsa_switch *ds, int port,
- const struct phylink_link_state *state)
- {
-@@ -1392,6 +1651,49 @@ unsupported:
- return false;
- }
-
-+static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
-+{
-+ u32 val;
-+
-+ val = mt7530_read(priv, MT7531_TOP_SIG_SR);
-+ return ((val & PAD_DUAL_SGMII_EN) != 0);
-+}
-+
-+static bool mt7531_phy_supported(struct dsa_switch *ds, int port,
-+ const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ switch (port) {
-+ case 0: /* Internal phy */
-+ case 1:
-+ case 2:
-+ case 3:
-+ case 4:
-+ if (state->interface != PHY_INTERFACE_MODE_GMII)
-+ goto unsupported;
-+ break;
-+ case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
-+ if (!mt7531_dual_sgmii_supported(priv))
-+ return phy_interface_mode_is_rgmii(state->interface);
-+ /* fall through */
-+ case 6: /* 1st cpu port supports sgmii/8023z only */
-+ if (state->interface != PHY_INTERFACE_MODE_SGMII &&
-+ !phy_interface_mode_is_8023z(state->interface))
-+ goto unsupported;
-+ break;
-+ default:
-+ dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
-+ port);
-+ goto unsupported;
-+ }
-+
-+ return true;
-+
-+unsupported:
-+ return false;
-+}
-+
- static bool mt753x_phy_supported(struct dsa_switch *ds, int port,
- const struct phylink_link_state *state)
- {
-@@ -1413,7 +1715,144 @@ mt7530_pad_setup(struct dsa_switch *ds,
- * host which must be placed after the setup on the
- * device side is all finished.
- */
-- mt7623_pad_clk_setup(ds);
-+ //mt7623_pad_clk_setup(ds);
-+ }
-+
-+ return 0;
-+}
-+
-+static int
-+mt7531_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+ u32 xtal, val;
-+
-+ if (mt7531_dual_sgmii_supported(priv))
-+ return 0;
-+
-+ xtal = mt7530_read(priv, MT7531_HWTRAP) & HWTRAP_XTAL_FSEL_MASK;
-+
-+ switch (xtal) {
-+ case HWTRAP_XTAL_FSEL_25MHZ:
-+ /* Step 1 : Disable MT7531 COREPLL */
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val &= ~EN_COREPLL;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+
-+ /* Step 2: switch to XTAL output */
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val |= SW_CLKSW;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_EN;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ /* Step 3: disable PLLGP and enable program PLLGP */
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val |= SW_PLLGP;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+
-+ /* Step 4: program COREPLL output frequency to 500MHz */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_POSDIV_M;
-+ val |= 2 << RG_COREPLL_POSDIV_S;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+ usleep_range(25, 35);
-+
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_SDM_PCW_M;
-+ val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ /* Set feedback divide ratio update signal to high */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val |= RG_COREPLL_SDM_PCW_CHG;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+ /* Wait for at least 16 XTAL clocks */
-+ usleep_range(10, 20);
-+
-+ /* Step 5: set feedback divide ratio update signal to low */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_SDM_PCW_CHG;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ /* Enable 325M clock for SGMII */
-+ mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
-+
-+ /* Enable 250SSC clock for RGMII */
-+ mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
-+
-+ /* Step 6: Enable MT7531 PLL */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val |= RG_COREPLL_EN;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val |= EN_COREPLL;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+ usleep_range(25, 35);
-+ break;
-+ case HWTRAP_XTAL_FSEL_40MHZ:
-+ /* Step 1 : Disable MT7531 COREPLL */
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val &= ~EN_COREPLL;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+
-+ /* Step 2: switch to XTAL output */
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val |= SW_CLKSW;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_EN;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ /* Step 3: disable PLLGP and enable program PLLGP */
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val |= SW_PLLGP;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+
-+ /* Step 4: program COREPLL output frequency to 500MHz */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_POSDIV_M;
-+ val |= 2 << RG_COREPLL_POSDIV_S;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+ usleep_range(25, 35);
-+
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_SDM_PCW_M;
-+ val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ /* Set feedback divide ratio update signal to high */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val |= RG_COREPLL_SDM_PCW_CHG;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+ /* Wait for at least 16 XTAL clocks */
-+ usleep_range(10, 20);
-+
-+ /* Step 5: set feedback divide ratio update signal to low */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val &= ~RG_COREPLL_SDM_PCW_CHG;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ /* Enable 325M clock for SGMII */
-+ mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
-+
-+ /* Enable 250SSC clock for RGMII */
-+ mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
-+
-+ /* Step 6: Enable MT7531 PLL */
-+ val = mt7530_read(priv, MT7531_PLLGP_CR0);
-+ val |= RG_COREPLL_EN;
-+ mt7530_write(priv, MT7531_PLLGP_CR0, val);
-+
-+ val = mt7530_read(priv, MT7531_PLLGP_EN);
-+ val |= EN_COREPLL;
-+ mt7530_write(priv, MT7531_PLLGP_EN, val);
-+ usleep_range(25, 35);
-+ break;
- }
-
- return 0;
-@@ -1442,6 +1881,149 @@ mt7530_mac_setup(struct dsa_switch *ds,
- return 0;
- }
-
-+static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port)
-+{
-+ u32 val;
-+
-+ if (port != 5) {
-+ dev_err(priv->dev, "RGMII mode is not available for port %d\n",
-+ port);
-+ return -EINVAL;
-+ }
-+
-+ val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
-+ val |= GP_CLK_EN;
-+ val &= ~GP_MODE_MASK;
-+ val |= GP_MODE(MT7531_GP_MODE_RGMII);
-+ val |= TXCLK_NO_REVERSE;
-+ val |= RXCLK_NO_DELAY;
-+ val &= ~CLK_SKEW_IN_MASK;
-+ val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG);
-+ val &= ~CLK_SKEW_OUT_MASK;
-+ val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG);
-+ mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
-+
-+ return 0;
-+}
-+
-+static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port,
-+ const struct phylink_link_state *state)
-+{
-+ u32 val;
-+
-+ if (port != 5 && port != 6)
-+ return -EINVAL;
-+
-+ val = mt7530_read(priv, MT7531_QPHY_PWR_STATE_CTRL(port));
-+ val |= MT7531_SGMII_PHYA_PWD;
-+ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), val);
-+
-+ val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port));
-+ val &= ~MT7531_RG_TPHY_SPEED_MASK;
-+ if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
-+ val |= MT7531_RG_TPHY_SPEED_3_125G;
-+ mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val);
-+
-+ val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
-+ val &= ~MT7531_SGMII_AN_ENABLE;
-+ mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
-+
-+ val = mt7530_read(priv, MT7531_SGMII_MODE(port));
-+ val &= ~MT7531_SGMII_IF_MODE_MASK;
-+
-+ switch (state->speed) {
-+ case SPEED_10:
-+ val |= MT7531_SGMII_FORCE_SPEED_10;
-+ break;
-+ case SPEED_100:
-+ val |= MT7531_SGMII_FORCE_SPEED_100;
-+ break;
-+ case SPEED_2500:
-+ case SPEED_1000:
-+ val |= MT7531_SGMII_FORCE_SPEED_1000;
-+ break;
-+ };
-+
-+ val &= ~MT7531_SGMII_FORCE_DUPLEX;
-+ /* For sgmii force mode, 0 is full duplex and 1 is half duplex */
-+ if (state->duplex == DUPLEX_HALF)
-+ val |= MT7531_SGMII_FORCE_DUPLEX;
-+
-+ mt7530_write(priv, MT7531_SGMII_MODE(port), val);
-+
-+ val = mt7530_read(priv, MT7531_QPHY_PWR_STATE_CTRL(port));
-+ val &= ~MT7531_SGMII_PHYA_PWD;
-+ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), val);
-+
-+ return 0;
-+}
-+
-+static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port,
-+ const struct phylink_link_state *state)
-+{
-+ u32 val;
-+
-+ if (port != 5 && port != 6)
-+ return -EINVAL;
-+
-+ val = mt7530_read(priv, MT7531_QPHY_PWR_STATE_CTRL(port));
-+ val |= MT7531_SGMII_PHYA_PWD;
-+ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), val);
-+
-+ switch (state->speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ case SPEED_1000:
-+ val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port));
-+ val &= ~MT7531_RG_TPHY_SPEED_MASK;
-+ mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val);
-+ break;
-+ default:
-+ dev_info(priv->dev, "invalid SGMII speed idx %d for port %d\n",
-+ state->speed, port);
-+
-+ return -EINVAL;
-+ }
-+
-+ val = mt7530_read(priv, MT7531_SGMII_MODE(port));
-+ val |= MT7531_SGMII_REMOTE_FAULT_DIS;
-+ mt7530_write(priv, MT7531_SGMII_MODE(port), val);
-+
-+ val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
-+ val |= MT7531_SGMII_AN_RESTART;
-+ mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
-+
-+ val = mt7530_read(priv, MT7531_QPHY_PWR_STATE_CTRL(port));
-+ val &= ~MT7531_SGMII_PHYA_PWD;
-+ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), val);
-+
-+ return 0;
-+}
-+
-+static int
-+mt7531_mac_setup(struct dsa_switch *ds, int port, unsigned int mode,
-+ const struct phylink_link_state *state)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ if (port < 5 || port >= MT7530_NUM_PORTS) {
-+ dev_err(priv->dev, "port %d is not a MAC port\n", port);
-+ return -EINVAL;
-+ }
-+
-+ switch (state->interface) {
-+ case PHY_INTERFACE_MODE_RGMII:
-+ return mt7531_rgmii_setup(priv, port);
-+ case PHY_INTERFACE_MODE_1000BASEX:
-+ case PHY_INTERFACE_MODE_2500BASEX:
-+ return mt7531_sgmii_setup_mode_force(priv, port, state);
-+ case PHY_INTERFACE_MODE_SGMII:
-+ return mt7531_sgmii_setup_mode_an(priv, port, state);
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
- static int mt753x_mac_setup(struct dsa_switch *ds, int port, unsigned int mode,
- const struct phylink_link_state *state)
- {
-@@ -1473,22 +2055,23 @@ static void mt753x_phylink_mac_config(st
- if (priv->p5_interface == state->interface)
- break;
- if (mt753x_mac_setup(ds, port, mode, state) < 0)
-- goto unsupported;
-+ break;
-+ priv->p5_interface = state->interface;
- break;
- case 6: /* 1st cpu port */
- if (priv->p6_interface == state->interface)
- break;
- mt753x_pad_setup(ds, state);
- if (mt753x_mac_setup(ds, port, mode, state) < 0)
-- goto unsupported;
-+ break;
- priv->p6_interface = state->interface;
- break;
- default:
-- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
- return;
- }
-
-- if (phylink_autoneg_inband(mode)) {
-+ if (phylink_autoneg_inband(mode) &&
-+ state->interface != PHY_INTERFACE_MODE_SGMII) {
- dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
- __func__);
- return;
-@@ -1499,13 +2082,15 @@ static void mt753x_phylink_mac_config(st
- mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 |
- PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN);
- mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
-- PMCR_BACKPR_EN | PMCR_FORCE_MODE;
-+ PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id) |
-+ PMCR_FORCE_LNK;
-
- /* Are we connected to external phy */
- if (port == 5 && dsa_is_user_port(ds, 5))
- mcr_new |= PMCR_EXT_PHY;
-
- switch (state->speed) {
-+ case SPEED_2500:
- case SPEED_1000:
- mcr_new |= PMCR_FORCE_SPEED_1000;
- if (priv->eee_enable & BIT(port))
-@@ -1529,6 +2114,27 @@ static void mt753x_phylink_mac_config(st
- mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
- }
-
-+void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+ u32 val;
-+
-+ val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
-+ val |= MT7531_SGMII_AN_RESTART;
-+ mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
-+}
-+
-+static void
-+mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port)
-+{
-+ struct mt7530_priv *priv = ds->priv;
-+
-+ if (!priv->info->port_an_restart)
-+ return;
-+
-+ priv->info->port_an_restart(ds, port);
-+}
-+
- static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface)
-@@ -1563,9 +2169,20 @@ static void mt753x_phylink_validate(stru
- phylink_set_port_modes(mask);
- phylink_set(mask, Autoneg);
-
-- if (state->interface == PHY_INTERFACE_MODE_TRGMII) {
-+ switch (state->interface) {
-+ case PHY_INTERFACE_MODE_TRGMII:
- phylink_set(mask, 1000baseT_Full);
-- } else {
-+ break;
-+ case PHY_INTERFACE_MODE_1000BASEX:
-+ case PHY_INTERFACE_MODE_2500BASEX:
-+ phylink_set(mask, 1000baseX_Full);
-+ phylink_set(mask, 2500baseX_Full);
-+ break;
-+ case PHY_INTERFACE_MODE_SGMII:
-+ phylink_set(mask, 1000baseT_Full);
-+ phylink_set(mask, 1000baseX_Full);
-+ /* fall through */
-+ default:
- phylink_set(mask, 10baseT_Half);
- phylink_set(mask, 10baseT_Full);
- phylink_set(mask, 100baseT_Half);
-@@ -1577,6 +2194,7 @@ static void mt753x_phylink_validate(stru
- if (port == 5)
- phylink_set(mask, 1000baseX_Full);
- }
-+ break;
- }
-
- phylink_set(mask, Pause);
-@@ -1721,8 +2339,9 @@ static const struct dsa_switch_ops mt753
- .port_mirror_add = mt7530_port_mirror_add,
- .port_mirror_del = mt7530_port_mirror_del,
- .phylink_validate = mt753x_phylink_validate,
-- .phylink_mac_link_state = mt7530_phylink_mac_link_state,
-+ .phylink_mac_link_state = mt7530_phylink_mac_link_state,
- .phylink_mac_config = mt753x_phylink_mac_config,
-+ .phylink_mac_an_restart = mt753x_phylink_mac_an_restart,
- .phylink_mac_link_down = mt7530_phylink_mac_link_down,
- .phylink_mac_link_up = mt7530_phylink_mac_link_up,
- .get_mac_eee = mt7530_get_mac_eee,
-@@ -1748,11 +2367,22 @@ static const struct mt753x_info mt753x_t
- .pad_setup = mt7530_pad_setup,
- .mac_setup = mt7530_mac_setup,
- },
-+ [ID_MT7531] = {
-+ .id = ID_MT7531,
-+ .setup = mt7531_setup,
-+ .phy_read = mt7531_ind_phy_read,
-+ .phy_write = mt7531_ind_phy_write,
-+ .phy_supported = mt7531_phy_supported,
-+ .pad_setup = mt7531_pad_setup,
-+ .mac_setup = mt7531_mac_setup,
-+ .port_an_restart = mt7531_sgmii_restart_an,
-+ },
- };
-
- static const struct of_device_id mt7530_of_match[] = {
- { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
- { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
-+ { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
- { /* sentinel */ },
- };
- MODULE_DEVICE_TABLE(of, mt7530_of_match);
---- a/drivers/net/dsa/mt7530.h
-+++ b/drivers/net/dsa/mt7530.h
-@@ -14,6 +14,7 @@
- enum mt753x_id {
- ID_MT7530 = 0,
- ID_MT7621 = 1,
-+ ID_MT7531 = 2,
- };
-
- #define NUM_TRGMII_CTRL 5
-@@ -222,6 +223,19 @@ enum mt7530_vlan_port_attr {
- #define PMCR_FORCE_LNK BIT(0)
- #define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
- PMCR_FORCE_SPEED_1000)
-+#define MT7531_FORCE_LNK BIT(31)
-+#define MT7531_FORCE_SPD BIT(30)
-+#define MT7531_FORCE_DPX BIT(29)
-+#define MT7531_FORCE_RX_FC BIT(28)
-+#define MT7531_FORCE_TX_FC BIT(27)
-+#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
-+ MT7531_FORCE_SPD | \
-+ MT7531_FORCE_DPX | \
-+ MT7531_FORCE_RX_FC | \
-+ MT7531_FORCE_TX_FC)
-+#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \
-+ MT7531_FORCE_MODE : \
-+ PMCR_FORCE_MODE)
-
- #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
- #define PMSR_EEE1G BIT(7)
-@@ -258,12 +272,111 @@ enum mt7530_vlan_port_attr {
- CCR_RX_OCT_CNT_BAD | \
- CCR_TX_OCT_CNT_GOOD | \
- CCR_TX_OCT_CNT_BAD)
-+
-+/* SGMII registers */
-+#define MT7531_SGMII_REG_BASE 0x5000
-+#define MT7531_SGMII_REG(p, r) (MT7531_SGMII_REG_BASE + \
-+ ((p) - 5) * 0x1000 + (r))
-+
-+/* SGMII PCS_CONTROL_1 */
-+#define MT7531_PCS_CONTROL_1(p) MT7531_SGMII_REG(p, 0x00)
-+#define MT7531_SGMII_LINK_STATUS BIT(18)
-+#define MT7531_SGMII_AN_ENABLE BIT(12)
-+#define MT7531_SGMII_AN_RESTART BIT(9)
-+
-+/* Fields of SGMII_MODE */
-+#define MT7531_SGMII_MODE(p) MT7531_SGMII_REG(p, 0x20)
-+#define MT7531_SGMII_REMOTE_FAULT_DIS BIT(8)
-+#define MT7531_SGMII_FORCE_DUPLEX BIT(4)
-+#define MT7531_SGMII_IF_MODE_MASK GENMASK(5, 1)
-+#define MT7531_SGMII_FORCE_SPEED_10 0x0
-+#define MT7531_SGMII_FORCE_SPEED_100 BIT(2)
-+#define MT7531_SGMII_FORCE_SPEED_1000 BIT(3)
-+
-+/* Fields of QPHY_PWR_STATE_CTRL */
-+#define MT7531_QPHY_PWR_STATE_CTRL(p) MT7531_SGMII_REG(p, 0xe8)
-+#define MT7531_SGMII_PHYA_PWD BIT(4)
-+
-+/* Values of SGMII SPEED */
-+#define MT7531_PHYA_CTRL_SIGNAL3(p) MT7531_SGMII_REG(p, 0x128)
-+#define MT7531_RG_TPHY_SPEED_MASK (BIT(2) | BIT(3))
-+#define MT7531_RG_TPHY_SPEED_1_25G 0x0
-+#define MT7531_RG_TPHY_SPEED_3_125G BIT(2)
-+
- /* Register for system reset */
- #define MT7530_SYS_CTRL 0x7000
- #define SYS_CTRL_PHY_RST BIT(2)
- #define SYS_CTRL_SW_RST BIT(1)
- #define SYS_CTRL_REG_RST BIT(0)
-
-+/* Register for PHY Indirect Access Control */
-+#define MT7531_PHY_IAC 0x701C
-+#define PHY_ACS_ST BIT(31)
-+#define MDIO_REG_ADDR_MASK (0x1f << 25)
-+#define MDIO_PHY_ADDR_MASK (0x1f << 20)
-+#define MDIO_CMD_MASK (0x3 << 18)
-+#define MDIO_ST_MASK (0x3 << 16)
-+#define MDIO_RW_DATA_MASK (0xffff)
-+#define MDIO_REG_ADDR(x) (((x) & 0x1f) << 25)
-+#define MDIO_DEV_ADDR(x) (((x) & 0x1f) << 25)
-+#define MDIO_PHY_ADDR(x) (((x) & 0x1f) << 20)
-+#define MDIO_CMD(x) (((x) & 0x3) << 18)
-+#define MDIO_ST(x) (((x) & 0x3) << 16)
-+
-+enum mt7531_phy_iac_cmd {
-+ MT7531_MDIO_ADDR = 0,
-+ MT7531_MDIO_WRITE = 1,
-+ MT7531_MDIO_READ = 2,
-+ MT7531_MDIO_READ_CL45 = 3,
-+};
-+
-+/* MDIO_ST: MDIO start field */
-+enum mt7531_mdio_st {
-+ MT7531_MDIO_ST_CL45 = 0,
-+ MT7531_MDIO_ST_CL22 = 1,
-+};
-+
-+#define MDIO_CL22_READ (MDIO_ST(MT7531_MDIO_ST_CL22) | \
-+ MDIO_CMD(MT7531_MDIO_READ))
-+#define MDIO_CL22_WRITE (MDIO_ST(MT7531_MDIO_ST_CL22) | \
-+ MDIO_CMD(MT7531_MDIO_WRITE))
-+#define MDIO_CL45_ADDR (MDIO_ST(MT7531_MDIO_ST_CL45) | \
-+ MDIO_CMD(MT7531_MDIO_ADDR))
-+#define MDIO_CL45_READ (MDIO_ST(MT7531_MDIO_ST_CL45) | \
-+ MDIO_CMD(MT7531_MDIO_READ))
-+#define MDIO_CL45_WRITE (MDIO_ST(MT7531_MDIO_ST_CL45) | \
-+ MDIO_CMD(MT7531_MDIO_WRITE))
-+
-+#define MT7531_CLKGEN_CTRL 0x7500
-+#define CLK_SKEW_OUT(x) (((x) & 0x3) << 8)
-+#define CLK_SKEW_OUT_MASK (0x3 << 8)
-+#define CLK_SKEW_IN(x) (((x) & 0x3) << 6)
-+#define CLK_SKEW_IN_MASK (0x3 << 6)
-+#define RXCLK_NO_DELAY BIT(5)
-+#define TXCLK_NO_REVERSE BIT(4)
-+#define GP_MODE(x) (((x) & 0x3) << 1)
-+#define GP_MODE_MASK (0x3 << 1)
-+#define GP_CLK_EN BIT(0)
-+
-+#define PHY_DEV1F 0x1f
-+#define MT7531_PHY_DEV1F_REG_403 0x403
-+
-+#define MT7531_PHY_EN_BYPASS_MODE BIT(4)
-+#define MT7531_PHY_POWER_OFF BIT(5)
-+
-+enum mt7531_gp_mode {
-+ MT7531_GP_MODE_RGMII = 0,
-+ MT7531_GP_MODE_MII = 1,
-+ MT7531_GP_MODE_REV_MII = 2
-+};
-+
-+enum mt7531_clk_skew {
-+ MT7531_CLK_SKEW_NO_CHG = 0,
-+ MT7531_CLK_SKEW_DLY_100PPS = 1,
-+ MT7531_CLK_SKEW_DLY_200PPS = 2,
-+ MT7531_CLK_SKEW_REVERSE = 3,
-+};
-+
- /* Register for hw trap status */
- #define MT7530_HWTRAP 0x7800
- #define HWTRAP_XTAL_MASK (BIT(10) | BIT(9))
-@@ -271,6 +384,11 @@ enum mt7530_vlan_port_attr {
- #define HWTRAP_XTAL_40MHZ (BIT(10))
- #define HWTRAP_XTAL_20MHZ (BIT(9))
-
-+#define MT7531_HWTRAP 0x7800
-+#define HWTRAP_XTAL_FSEL_MASK BIT(7)
-+#define HWTRAP_XTAL_FSEL_25MHZ BIT(7)
-+#define HWTRAP_XTAL_FSEL_40MHZ 0
-+
- /* Register for hw trap modification */
- #define MT7530_MHWTRAP 0x7804
- #define MHWTRAP_PHY0_SEL BIT(20)
-@@ -285,14 +403,34 @@ enum mt7530_vlan_port_attr {
- #define MT7530_TOP_SIG_CTRL 0x7808
- #define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16))
-
-+#define MT7531_TOP_SIG_SR 0x780c
-+#define PAD_DUAL_SGMII_EN BIT(1)
-+
- #define MT7530_IO_DRV_CR 0x7810
- #define P5_IO_CLK_DRV(x) ((x) & 0x3)
- #define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4)
-
-+#define MT7531_PLLGP_EN 0x7820
-+#define EN_COREPLL BIT(2)
-+#define SW_CLKSW BIT(1)
-+#define SW_PLLGP BIT(0)
-+
-+#define MT7531_PLLGP_CR0 0x78a8
-+#define RG_COREPLL_EN BIT(22)
-+#define RG_COREPLL_POSDIV_S 23
-+#define RG_COREPLL_POSDIV_M 0x3800000
-+#define RG_COREPLL_SDM_PCW_S 1
-+#define RG_COREPLL_SDM_PCW_M 0x3ffffe
-+#define RG_COREPLL_SDM_PCW_CHG BIT(0)
-+
- #define MT7530_P6ECR 0x7830
- #define P6_INTF_MODE_MASK 0x3
- #define P6_INTF_MODE(x) ((x) & 0x3)
-
-+/* RGMII and SGMII PLL clock */
-+#define MT7531_ANA_PLLGP_CR2 0x78b0
-+#define MT7531_ANA_PLLGP_CR5 0x78bc
-+
- /* Registers for TRGMII on the both side */
- #define MT7530_TRGMII_RCK_CTRL 0x7a00
- #define RX_RST BIT(31)
-@@ -335,6 +473,9 @@ enum mt7530_vlan_port_attr {
- #define CHIP_NAME_SHIFT 16
- #define MT7530_ID 0x7530
-
-+#define MT7531_CREV 0x781C
-+#define MT7531_ID 0x7531
-+
- /* Registers for core PLL access through mmd indirect */
- #define CORE_PLL_GROUP2 0x401
- #define RG_SYSPLL_EN_NORMAL BIT(15)
-@@ -458,6 +599,8 @@ static const char *p5_intf_modes(unsigne
- * port
- * @mac_setup: Holding the way setting up the PHY attribute for a
- * certain MAC port
-+ * @port_an_restart Holding the way restarting 802.3z BaseX autonegotiation
-+ * for a certain MAC port
- */
- struct mt753x_info {
- enum mt753x_id id;
-@@ -471,6 +614,7 @@ struct mt753x_info {
- const struct phylink_link_state *state);
- int (*mac_setup)(struct dsa_switch *ds, int port, unsigned int mode,
- const struct phylink_link_state *state);
-+ void (*port_an_restart)(struct dsa_switch *ds, int port);
- };
-
- /* struct mt7530_priv - This is the main data structure for holding the state
diff --git a/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch b/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
deleted file mode 100644
index 8919ad27e0..0000000000
--- a/target/linux/mediatek/patches-5.4/0600-6-6-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From patchwork Tue Dec 10 08:14:42 2019
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Landen Chao <landen.chao@mediatek.com>
-X-Patchwork-Id: 1206964
-X-Patchwork-Delegate: davem@davemloft.net
-Return-Path: <netdev-owner@vger.kernel.org>
-X-Original-To: patchwork-incoming-netdev@ozlabs.org
-Delivered-To: patchwork-incoming-netdev@ozlabs.org
-Authentication-Results: ozlabs.org; spf=none (no SPF record)
- smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67;
- helo=vger.kernel.org;
- envelope-from=netdev-owner@vger.kernel.org;
- receiver=<UNKNOWN>)
-Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none)
- header.from=mediatek.com
-Authentication-Results: ozlabs.org; dkim=pass (1024-bit key;
- unprotected) header.d=mediatek.com header.i=@mediatek.com
- header.b="eagJVm76"; dkim-atps=neutral
-Received: from vger.kernel.org (vger.kernel.org [209.132.180.67])
- by ozlabs.org (Postfix) with ESMTP id 47XCYF2fNjz9sR7
- for <patchwork-incoming-netdev@ozlabs.org>;
- Tue, 10 Dec 2019 19:15:29 +1100 (AEDT)
-Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
- id S1727295AbfLJIP0 (ORCPT
- <rfc822;patchwork-incoming-netdev@ozlabs.org>);
- Tue, 10 Dec 2019 03:15:26 -0500
-Received: from mailgw01.mediatek.com ([210.61.82.183]:21469 "EHLO
- mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by
- vger.kernel.org with ESMTP id S1726062AbfLJIO4 (ORCPT
- <rfc822;netdev@vger.kernel.org>); Tue, 10 Dec 2019 03:14:56 -0500
-X-UUID: f9b456136baf42daba0957485d388010-20191210
-DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
- d=mediatek.com; s=dk;
- h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From;
- bh=BT+q/z4xoeKXCk+y25bvARvW/z0vRa1uB7kHqAjvpaw=;
- b=eagJVm76XNgnVVvxDHR4QtcIyynPPYY4k7twyvlRAQeSnsJbABh1afLK+LlxnJ0TM069F+hNNzWXq7ZGru/I+gYhmqZcYCt/SkEYgxdTb0VNE+DIW0hmNAOoJ0i23gobJ3xa7JVRfIfeZcbjwRJSuqwzLBRZBLIFzqSs71VZx1Y=;
-X-UUID: f9b456136baf42daba0957485d388010-20191210
-Received: from mtkcas07.mediatek.inc [(172.21.101.84)] by
- mailgw01.mediatek.com (envelope-from <landen.chao@mediatek.com>)
- (Cellopoint E-mail Firewall v4.1.10 Build 0809 with TLS)
- with ESMTP id 1831961689; Tue, 10 Dec 2019 16:14:48 +0800
-Received: from mtkcas08.mediatek.inc (172.21.101.126) by
- mtkmbs07n2.mediatek.inc (172.21.101.141) with Microsoft SMTP Server
- (TLS) id 15.0.1395.4; Tue, 10 Dec 2019 16:14:32 +0800
-Received: from mtksdccf07.mediatek.inc (172.21.84.99) by mtkcas08.mediatek.inc
- (172.21.101.73) with Microsoft SMTP Server id 15.0.1395.4 via
- Frontend Transport; Tue, 10 Dec 2019 16:14:27 +0800
-From: Landen Chao <landen.chao@mediatek.com>
-To: <andrew@lunn.ch>, <f.fainelli@gmail.com>,
- <vivien.didelot@savoirfairelinux.com>, <matthias.bgg@gmail.com>,
- <robh+dt@kernel.org>, <mark.rutland@arm.com>
-CC: <devicetree@vger.kernel.org>, <netdev@vger.kernel.org>,
- <linux-kernel@vger.kernel.org>,
- <linux-mediatek@lists.infradead.org>, <davem@davemloft.net>,
- <sean.wang@mediatek.com>, <opensource@vdorst.com>,
- <frank-w@public-files.de>, Landen Chao <landen.chao@mediatek.com>
-Subject: [PATCH net-next 6/6] arm64: dts: mt7622: add mt7531 dsa to
- bananapi-bpi-r64 board
-Date: Tue, 10 Dec 2019 16:14:42 +0800
-Message-ID: <62eef5503c117f48d4b41e94fd28d75e123590b4.1575914275.git.landen.chao@mediatek.com>
-X-Mailer: git-send-email 2.18.0
-In-Reply-To: <cover.1575914275.git.landen.chao@mediatek.com>
-References: <cover.1575914275.git.landen.chao@mediatek.com>
-MIME-Version: 1.0
-X-MTK: N
-Sender: netdev-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <netdev.vger.kernel.org>
-X-Mailing-List: netdev@vger.kernel.org
-
-Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
-
-Signed-off-by: Landen Chao <landen.chao@mediatek.com>
----
- .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++++++++++++++++++
- 1 file changed, 50 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -150,6 +150,56 @@
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-+
-+ switch@0 {
-+ compatible = "mediatek,mt7531";
-+ reg = <0>;
-+ reset-gpios = <&pio 54 0>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan0";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan1";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan2";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "lan3";
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <2500>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+ };
-+ };
-+
- };
- };
-
diff --git a/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch
new file mode 100644
index 0000000000..34a15334d6
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch
@@ -0,0 +1,246 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Wed, 26 Feb 2020 10:23:41 +0000
+Subject: [PATCH] net: phylink: propagate resolved link config via
+ mac_link_up()
+
+Propagate the resolved link parameters via the mac_link_up() call for
+MACs that do not automatically track their PCS state. We propagate the
+link parameters via function arguments so that inappropriate members
+of struct phylink_link_state can't be accessed, and creating a new
+structure just for this adds needless complexity to the API.
+
+Tested-by: Andre Przywara <andre.przywara@arm.com>
+Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/Documentation/networking/sfp-phylink.rst
++++ b/Documentation/networking/sfp-phylink.rst
+@@ -74,10 +74,13 @@ phylib to the sfp/phylink support. Plea
+ this documentation.
+
+ 1. Optionally split the network driver's phylib update function into
+- three parts dealing with link-down, link-up and reconfiguring the
+- MAC settings. This can be done as a separate preparation commit.
++ two parts dealing with link-down and link-up. This can be done as
++ a separate preparation commit.
+
+- An example of this preparation can be found in git commit fc548b991fb0.
++ An older example of this preparation can be found in git commit
++ fc548b991fb0, although this was splitting into three parts; the
++ link-up part now includes configuring the MAC for the link settings.
++ Please see :c:func:`mac_link_up` for more information on this.
+
+ 2. Replace::
+
+@@ -207,6 +210,14 @@ this documentation.
+ using. This is particularly important for in-band negotiation
+ methods such as 1000base-X and SGMII.
+
++ The :c:func:`mac_link_up` method is used to inform the MAC that the
++ link has come up. The call includes the negotiation mode and interface
++ for reference only. The finalised link parameters are also supplied
++ (speed, duplex and flow control/pause enablement settings) which
++ should be used to configure the MAC when the MAC and PCS are not
++ tightly integrated, or when the settings are not coming from in-band
++ negotiation.
++
+ The :c:func:`mac_config` method is used to update the MAC with the
+ requested state, and must avoid unnecessarily taking the link down
+ when making changes to the MAC configuration. This means the
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -3653,9 +3653,11 @@ static void mvneta_mac_link_down(struct
+ mvneta_set_eee(pp, false);
+ }
+
+-static void mvneta_mac_link_up(struct phylink_config *config, unsigned int mode,
+- phy_interface_t interface,
+- struct phy_device *phy)
++static void mvneta_mac_link_up(struct phylink_config *config,
++ struct phy_device *phy,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct net_device *ndev = to_net_dev(config->dev);
+ struct mvneta_port *pp = netdev_priv(ndev);
+--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
++++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+@@ -58,8 +58,11 @@ static struct {
+ */
+ static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state);
+-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
+- phy_interface_t interface, struct phy_device *phy);
++static void mvpp2_mac_link_up(struct phylink_config *config,
++ struct phy_device *phy,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause);
+
+ /* Queue modes */
+ #define MVPP2_QDIST_SINGLE_MODE 0
+@@ -3467,8 +3470,9 @@ static void mvpp2_start_dev(struct mvpp2
+ .interface = port->phy_interface,
+ };
+ mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
+- mvpp2_mac_link_up(&port->phylink_config, MLO_AN_INBAND,
+- port->phy_interface, NULL);
++ mvpp2_mac_link_up(&port->phylink_config, NULL,
++ MLO_AN_INBAND, port->phy_interface,
++ SPEED_UNKNOWN, DUPLEX_UNKNOWN, false, false);
+ }
+
+ netif_tx_start_all_queues(port->dev);
+@@ -5124,8 +5128,11 @@ static void mvpp2_mac_config(struct phyl
+ mvpp2_port_enable(port);
+ }
+
+-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
+- phy_interface_t interface, struct phy_device *phy)
++static void mvpp2_mac_link_up(struct phylink_config *config,
++ struct phy_device *phy,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct net_device *dev = to_net_dev(config->dev);
+ struct mvpp2_port *port = netdev_priv(dev);
+--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+@@ -445,9 +445,10 @@ static void mtk_mac_link_down(struct phy
+ mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
+ }
+
+-static void mtk_mac_link_up(struct phylink_config *config, unsigned int mode,
+- phy_interface_t interface,
+- struct phy_device *phy)
++static void mtk_mac_link_up(struct phylink_config *config,
++ struct phy_device *phy,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex, bool tx_pause, bool rx_pause)
+ {
+ struct mtk_mac *mac = container_of(config, struct mtk_mac,
+ phylink_config);
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+@@ -951,8 +951,10 @@ static void stmmac_mac_link_down(struct
+ }
+
+ static void stmmac_mac_link_up(struct phylink_config *config,
++ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+- struct phy_device *phy)
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
++++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+@@ -1488,9 +1488,10 @@ static void axienet_mac_link_down(struct
+ }
+
+ static void axienet_mac_link_up(struct phylink_config *config,
+- unsigned int mode,
+- phy_interface_t interface,
+- struct phy_device *phy)
++ struct phy_device *phy,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ /* nothing meaningful to do */
+ }
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -447,8 +447,11 @@ static void phylink_mac_link_up(struct p
+ struct net_device *ndev = pl->netdev;
+
+ pl->cur_interface = link_state.interface;
+- pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
+- pl->cur_interface, pl->phydev);
++ pl->ops->mac_link_up(pl->config, pl->phydev,
++ pl->cur_link_an_mode, pl->cur_interface,
++ link_state.speed, link_state.duplex,
++ !!(link_state.pause & MLO_PAUSE_TX),
++ !!(link_state.pause & MLO_PAUSE_RX));
+
+ if (ndev)
+ netif_carrier_on(ndev);
+--- a/include/linux/phylink.h
++++ b/include/linux/phylink.h
+@@ -91,9 +91,10 @@ struct phylink_mac_ops {
+ void (*mac_an_restart)(struct phylink_config *config);
+ void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface);
+- void (*mac_link_up)(struct phylink_config *config, unsigned int mode,
+- phy_interface_t interface,
+- struct phy_device *phy);
++ void (*mac_link_up)(struct phylink_config *config,
++ struct phy_device *phy, unsigned int mode,
++ phy_interface_t interface, int speed, int duplex,
++ bool tx_pause, bool rx_pause);
+ };
+
+ #if 0 /* For kernel-doc purposes only. */
+@@ -217,19 +218,34 @@ void mac_link_down(struct phylink_config
+ /**
+ * mac_link_up() - allow the link to come up
+ * @config: a pointer to a &struct phylink_config.
++ * @phy: any attached phy
+ * @mode: link autonegotiation mode
+ * @interface: link &typedef phy_interface_t mode
+- * @phy: any attached phy
++ * @speed: link speed
++ * @duplex: link duplex
++ * @tx_pause: link transmit pause enablement status
++ * @rx_pause: link receive pause enablement status
+ *
+- * If @mode is not an in-band negotiation mode (as defined by
+- * phylink_autoneg_inband()), allow the link to come up. If @phy
+- * is non-%NULL, configure Energy Efficient Ethernet by calling
++ * Configure the MAC for an established link.
++ *
++ * @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link
++ * settings, and should be used to configure the MAC block appropriately
++ * where these settings are not automatically conveyed from the PCS block,
++ * or if in-band negotiation (as defined by phylink_autoneg_inband(@mode))
++ * is disabled.
++ *
++ * Note that when 802.3z in-band negotiation is in use, it is possible
++ * that the user wishes to override the pause settings, and this should
++ * be allowed when considering the implementation of this method.
++ *
++ * If in-band negotiation mode is disabled, allow the link to come up. If
++ * @phy is non-%NULL, configure Energy Efficient Ethernet by calling
+ * phy_init_eee() and perform appropriate MAC configuration for EEE.
+ * Interface type selection must be done in mac_config().
+ */
+-void mac_link_up(struct phylink_config *config, unsigned int mode,
+- phy_interface_t interface,
+- struct phy_device *phy);
++void mac_link_up(struct phylink_config *config, struct phy_device *phy,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex, bool tx_pause, bool rx_pause);
+ #endif
+
+ struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
+--- a/net/dsa/port.c
++++ b/net/dsa/port.c
+@@ -529,9 +529,11 @@ void dsa_port_phylink_mac_link_down(stru
+ EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_down);
+
+ void dsa_port_phylink_mac_link_up(struct phylink_config *config,
++ struct phy_device *phydev,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev)
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+ struct dsa_switch *ds = dp->ds;
diff --git a/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
new file mode 100644
index 0000000000..f74bc30d9e
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0601-net-dsa-propagate-resolved-link-config-via-mac_link_.patch
@@ -0,0 +1,143 @@
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Wed, 26 Feb 2020 10:23:46 +0000
+Subject: [PATCH] net: dsa: propagate resolved link config via mac_link_up()
+
+Propagate the resolved link configuration down via DSA's
+phylink_mac_link_up() operation to allow split PCS/MAC to work.
+
+Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1276,7 +1276,9 @@ EXPORT_SYMBOL(b53_phylink_mac_link_down)
+ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev)
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct b53_device *dev = ds->priv;
+
+--- a/drivers/net/dsa/b53/b53_priv.h
++++ b/drivers/net/dsa/b53/b53_priv.h
+@@ -337,7 +337,9 @@ void b53_phylink_mac_link_down(struct ds
+ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev);
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause);
+ int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering);
+ int b53_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+--- a/drivers/net/dsa/bcm_sf2.c
++++ b/drivers/net/dsa/bcm_sf2.c
+@@ -635,7 +635,9 @@ static void bcm_sf2_sw_mac_link_down(str
+ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev)
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ struct ethtool_eee *p = &priv->dev->ports[port].eee;
+--- a/drivers/net/dsa/lantiq_gswip.c
++++ b/drivers/net/dsa/lantiq_gswip.c
+@@ -1517,7 +1517,9 @@ static void gswip_phylink_mac_link_down(
+ static void gswip_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev)
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct gswip_priv *priv = ds->priv;
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1452,7 +1452,9 @@ static void mt7530_phylink_mac_link_down
+ static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev)
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ struct mt7530_priv *priv = ds->priv;
+
+--- a/drivers/net/dsa/mv88e6xxx/chip.c
++++ b/drivers/net/dsa/mv88e6xxx/chip.c
+@@ -652,7 +652,9 @@ static void mv88e6xxx_mac_link_down(stru
+
+ static void mv88e6xxx_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode, phy_interface_t interface,
+- struct phy_device *phydev)
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ if (mode == MLO_AN_FIXED)
+ mv88e6xxx_mac_link_force(ds, port, LINK_FORCED_UP);
+--- a/drivers/net/dsa/sja1105/sja1105_main.c
++++ b/drivers/net/dsa/sja1105/sja1105_main.c
+@@ -830,7 +830,9 @@ static void sja1105_mac_link_down(struct
+ static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev)
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause)
+ {
+ sja1105_inhibit_tx(ds->priv, BIT(port), false);
+ }
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
+@@ -401,7 +401,9 @@ struct dsa_switch_ops {
+ void (*phylink_mac_link_up)(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev);
++ struct phy_device *phydev,
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause);
+ void (*phylink_fixed_state)(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state);
+ /*
+--- a/net/dsa/port.c
++++ b/net/dsa/port.c
+@@ -544,7 +544,8 @@ void dsa_port_phylink_mac_link_up(struct
+ return;
+ }
+
+- ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev);
++ ds->ops->phylink_mac_link_up(ds, dp->index, mode, interface, phydev,
++ speed, duplex, tx_pause, rx_pause);
+ }
+ EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_up);
+
+--- a/net/dsa/dsa_priv.h
++++ b/net/dsa/dsa_priv.h
+@@ -180,9 +180,11 @@ void dsa_port_phylink_mac_link_down(stru
+ unsigned int mode,
+ phy_interface_t interface);
+ void dsa_port_phylink_mac_link_up(struct phylink_config *config,
++ struct phy_device *phydev,
+ unsigned int mode,
+ phy_interface_t interface,
+- struct phy_device *phydev);
++ int speed, int duplex,
++ bool tx_pause, bool rx_pause);
+ extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
+
+ /* slave.c */
diff --git a/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch
new file mode 100644
index 0000000000..30ce641486
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0602-net-dsa-mt7530-use-resolved-link-config-in-mac_link_.patch
@@ -0,0 +1,145 @@
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Fri, 27 Mar 2020 15:44:12 +0100
+Subject: [PATCH] net: dsa: mt7530: use resolved link config in mac_link_up()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Convert the mt7530 switch driver to use the finalised link
+parameters in mac_link_up() rather than the parameters in mac_config().
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+Tested-by: Sean Wang <sean.wang@mediatek.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -490,17 +490,6 @@ mt7530_mib_reset(struct dsa_switch *ds)
+ mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
+ }
+
+-static void
+-mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
+-{
+- u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK;
+-
+- if (enable)
+- mt7530_set(priv, MT7530_PMCR_P(port), mask);
+- else
+- mt7530_clear(priv, MT7530_PMCR_P(port), mask);
+-}
+-
+ static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
+ {
+ struct mt7530_priv *priv = ds->priv;
+@@ -674,7 +663,7 @@ mt7530_port_enable(struct dsa_switch *ds
+ priv->ports[port].enable = true;
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+ priv->ports[port].pm);
+- mt7530_port_set_status(priv, port, 0);
++ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
+
+ mutex_unlock(&priv->reg_mutex);
+
+@@ -697,7 +686,7 @@ mt7530_port_disable(struct dsa_switch *d
+ priv->ports[port].enable = false;
+ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
+ PCR_MATRIX_CLR);
+- mt7530_port_set_status(priv, port, 0);
++ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
+
+ mutex_unlock(&priv->reg_mutex);
+ }
+@@ -1407,8 +1396,7 @@ static void mt7530_phylink_mac_config(st
+
+ mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
+ mcr_new = mcr_cur;
+- mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 |
+- PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN);
++ mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
+ mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
+ PMCR_BACKPR_EN | PMCR_FORCE_MODE;
+
+@@ -1416,26 +1404,6 @@ static void mt7530_phylink_mac_config(st
+ if (port == 5 && dsa_is_user_port(ds, 5))
+ mcr_new |= PMCR_EXT_PHY;
+
+- switch (state->speed) {
+- case SPEED_1000:
+- mcr_new |= PMCR_FORCE_SPEED_1000;
+- if (priv->eee_enable & BIT(port))
+- mcr_new |= PMCR_FORCE_EEE1G;
+- break;
+- case SPEED_100:
+- mcr_new |= PMCR_FORCE_SPEED_100;
+- if (priv->eee_enable & BIT(port))
+- mcr_new |= PMCR_FORCE_EEE100;
+- break;
+- }
+- if (state->duplex == DUPLEX_FULL) {
+- mcr_new |= PMCR_FORCE_FDX;
+- if (state->pause & MLO_PAUSE_TX)
+- mcr_new |= PMCR_TX_FC_EN;
+- if (state->pause & MLO_PAUSE_RX)
+- mcr_new |= PMCR_RX_FC_EN;
+- }
+-
+ if (mcr_new != mcr_cur)
+ mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
+ }
+@@ -1446,7 +1414,7 @@ static void mt7530_phylink_mac_link_down
+ {
+ struct mt7530_priv *priv = ds->priv;
+
+- mt7530_port_set_status(priv, port, 0);
++ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
+ }
+
+ static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
+@@ -1457,8 +1425,31 @@ static void mt7530_phylink_mac_link_up(s
+ bool tx_pause, bool rx_pause)
+ {
+ struct mt7530_priv *priv = ds->priv;
++ u32 mcr;
+
+- mt7530_port_set_status(priv, port, 1);
++ mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
++
++ switch (speed) {
++ case SPEED_1000:
++ mcr |= PMCR_FORCE_SPEED_1000;
++ if (priv->eee_enable & BIT(port))
++ mcr_new |= PMCR_FORCE_EEE1G;
++ break;
++ case SPEED_100:
++ mcr |= PMCR_FORCE_SPEED_100;
++ if (priv->eee_enable & BIT(port))
++ mcr_new |= PMCR_FORCE_EEE100;
++ break;
++ }
++ if (duplex == DUPLEX_FULL) {
++ mcr |= PMCR_FORCE_FDX;
++ if (tx_pause)
++ mcr |= PMCR_TX_FC_EN;
++ if (rx_pause)
++ mcr |= PMCR_RX_FC_EN;
++ }
++
++ mt7530_set(priv, MT7530_PMCR_P(port), mcr);
+ }
+
+ static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -222,6 +222,10 @@ enum mt7530_vlan_port_attr {
+ #define PMCR_FORCE_LNK BIT(0)
+ #define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
+ PMCR_FORCE_SPEED_1000)
++#define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
++ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
++ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
++ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+ #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
+ #define PMSR_EEE1G BIT(7)
diff --git a/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch
new file mode 100644
index 0000000000..5ae3376290
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0603-net-dsa-mt7530-Extend-device-data-ready-for-adding-a.patch
@@ -0,0 +1,458 @@
+From: Landen Chao <landen.chao@mediatek.com>
+Date: Fri, 4 Sep 2020 22:21:57 +0800
+Subject: [PATCH] net: dsa: mt7530: Extend device data ready for adding a
+ new hardware
+
+Add a structure holding required operations for each device such as device
+initialization, PHY port read or write, a checker whether PHY interface is
+supported on a certain port, MAC port setup for either bus pad or a
+specific PHY interface.
+
+The patch is done for ready adding a new hardware MT7531, and keep the
+same setup logic of existing hardware.
+
+Signed-off-by: Landen Chao <landen.chao@mediatek.com>
+Signed-off-by: Sean Wang <sean.wang@mediatek.com>
+---
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -372,8 +372,9 @@ mt7530_fdb_write(struct mt7530_priv *pri
+ mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
+ }
+
++/* Setup TX circuit including relevant PAD and driving */
+ static int
+-mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
++mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
+ {
+ struct mt7530_priv *priv = ds->priv;
+ u32 ncpo1, ssc_delta, trgint, i, xtal;
+@@ -387,7 +388,7 @@ mt7530_pad_clk_setup(struct dsa_switch *
+ return -EINVAL;
+ }
+
+- switch (mode) {
++ switch (interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ trgint = 0;
+ /* PLL frequency: 125MHz */
+@@ -409,7 +410,8 @@ mt7530_pad_clk_setup(struct dsa_switch *
+ }
+ break;
+ default:
+- dev_err(priv->dev, "xMII mode %d not supported\n", mode);
++ dev_err(priv->dev, "xMII interface %d not supported\n",
++ interface);
+ return -EINVAL;
+ }
+
+@@ -1344,12 +1346,11 @@ mt7530_setup(struct dsa_switch *ds)
+ return 0;
+ }
+
+-static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
+- unsigned int mode,
+- const struct phylink_link_state *state)
++static bool
++mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
++ const struct phylink_link_state *state)
+ {
+ struct mt7530_priv *priv = ds->priv;
+- u32 mcr_cur, mcr_new;
+
+ switch (port) {
+ case 0: /* Internal phy */
+@@ -1358,33 +1359,114 @@ static void mt7530_phylink_mac_config(st
+ case 3:
+ case 4:
+ if (state->interface != PHY_INTERFACE_MODE_GMII)
+- return;
++ goto unsupported;
+ break;
+ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+- if (priv->p5_interface == state->interface)
+- break;
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_GMII)
+- return;
++ goto unsupported;
++ break;
++ case 6: /* 1st cpu port */
++ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
++ state->interface != PHY_INTERFACE_MODE_TRGMII)
++ goto unsupported;
++ break;
++ default:
++ dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
++ port);
++ goto unsupported;
++ }
++
++ return true;
++
++unsupported:
++ return false;
++}
++
++static bool
++mt753x_phy_mode_supported(struct dsa_switch *ds, int port,
++ const struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->phy_mode_supported(ds, port, state);
++}
++
++static int
++mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->pad_setup(ds, state->interface);
++}
++
++static int
++mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
++ phy_interface_t interface)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ /* Only need to setup port5. */
++ if (port != 5)
++ return 0;
++
++ mt7530_setup_port5(priv->ds, interface);
++
++ return 0;
++}
++
++static int
++mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
++ const struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->mac_port_config(ds, port, mode, state->interface);
++}
++
++static void
++mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
++ const struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
++ u32 mcr_cur, mcr_new;
++
++ if (!mt753x_phy_mode_supported(ds, port, state))
++ goto unsupported;
++
++ switch (port) {
++ case 0: /* Internal phy */
++ case 1:
++ case 2:
++ case 3:
++ case 4:
++ if (state->interface != PHY_INTERFACE_MODE_GMII)
++ goto unsupported;
++ break;
++ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
++ if (priv->p5_interface == state->interface)
++ break;
++
++ if (mt753x_mac_config(ds, port, mode, state) < 0)
++ goto unsupported;
+
+- mt7530_setup_port5(ds, state->interface);
+ break;
+ case 6: /* 1st cpu port */
+ if (priv->p6_interface == state->interface)
+ break;
+
+- if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+- state->interface != PHY_INTERFACE_MODE_TRGMII)
+- return;
++ mt753x_pad_setup(ds, state);
+
+- /* Setup TX circuit incluing relevant PAD and driving */
+- mt7530_pad_clk_setup(ds, state->interface);
++ if (mt753x_mac_config(ds, port, mode, state) < 0)
++ goto unsupported;
+
+ priv->p6_interface = state->interface;
+ break;
+ default:
+- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
++unsupported:
++ dev_err(ds->dev, "%s: unsupported %s port: %i\n",
++ __func__, phy_modes(state->interface), port);
+ return;
+ }
+
+@@ -1452,61 +1534,44 @@ static void mt7530_phylink_mac_link_up(s
+ mt7530_set(priv, MT7530_PMCR_P(port), mcr);
+ }
+
+-static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
+- unsigned long *supported,
+- struct phylink_link_state *state)
++static void
++mt7530_mac_port_validate(struct dsa_switch *ds, int port,
++ unsigned long *supported)
+ {
++ if (port == 5)
++ phylink_set(supported, 1000baseX_Full);
++}
++
++static void
++mt753x_phylink_validate(struct dsa_switch *ds, int port,
++ unsigned long *supported,
++ struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+- switch (port) {
+- case 0: /* Internal phy */
+- case 1:
+- case 2:
+- case 3:
+- case 4:
+- if (state->interface != PHY_INTERFACE_MODE_NA &&
+- state->interface != PHY_INTERFACE_MODE_GMII)
+- goto unsupported;
+- break;
+- case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */
+- if (state->interface != PHY_INTERFACE_MODE_NA &&
+- !phy_interface_mode_is_rgmii(state->interface) &&
+- state->interface != PHY_INTERFACE_MODE_MII &&
+- state->interface != PHY_INTERFACE_MODE_GMII)
+- goto unsupported;
+- break;
+- case 6: /* 1st cpu port */
+- if (state->interface != PHY_INTERFACE_MODE_NA &&
+- state->interface != PHY_INTERFACE_MODE_RGMII &&
+- state->interface != PHY_INTERFACE_MODE_TRGMII)
+- goto unsupported;
+- break;
+- default:
+- dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
+-unsupported:
++ if (state->interface != PHY_INTERFACE_MODE_NA &&
++ !mt753x_phy_mode_supported(ds, port, state)) {
+ linkmode_zero(supported);
+ return;
+ }
+
+ phylink_set_port_modes(mask);
+- phylink_set(mask, Autoneg);
+
+- if (state->interface == PHY_INTERFACE_MODE_TRGMII) {
+- phylink_set(mask, 1000baseT_Full);
+- } else {
++ if (state->interface != PHY_INTERFACE_MODE_TRGMII) {
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+-
+- if (state->interface != PHY_INTERFACE_MODE_MII) {
+- phylink_set(mask, 1000baseT_Half);
+- phylink_set(mask, 1000baseT_Full);
+- if (port == 5)
+- phylink_set(mask, 1000baseX_Full);
+- }
++ phylink_set(mask, Autoneg);
+ }
+
++ /* This switch only supports 1G full-duplex. */
++ if (state->interface != PHY_INTERFACE_MODE_MII)
++ phylink_set(mask, 1000baseT_Full);
++
++ priv->info->mac_port_validate(ds, port, mask);
++
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+@@ -1602,12 +1667,45 @@ static int mt7530_set_mac_eee(struct dsa
+ return 0;
+ }
+
++static int
++mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port,
++ struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->mac_port_get_state(ds, port, state);
++}
++
++static int
++mt753x_setup(struct dsa_switch *ds)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->sw_setup(ds);
++}
++
++static int
++mt753x_phy_read(struct dsa_switch *ds, int port, int regnum)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->phy_read(ds, port, regnum);
++}
++
++static int
++mt753x_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ return priv->info->phy_write(ds, port, regnum, val);
++}
++
+ static const struct dsa_switch_ops mt7530_switch_ops = {
+ .get_tag_protocol = mtk_get_tag_protocol,
+- .setup = mt7530_setup,
++ .setup = mt753x_setup,
+ .get_strings = mt7530_get_strings,
+- .phy_read = mt7530_phy_read,
+- .phy_write = mt7530_phy_write,
++ .phy_read = mt753x_phy_read,
++ .phy_write = mt753x_phy_write,
+ .get_ethtool_stats = mt7530_get_ethtool_stats,
+ .get_sset_count = mt7530_get_sset_count,
+ .port_enable = mt7530_port_enable,
+@@ -1624,18 +1722,43 @@ static const struct dsa_switch_ops mt753
+ .port_vlan_del = mt7530_port_vlan_del,
+ .port_mirror_add = mt7530_port_mirror_add,
+ .port_mirror_del = mt7530_port_mirror_del,
+- .phylink_validate = mt7530_phylink_validate,
+- .phylink_mac_link_state = mt7530_phylink_mac_link_state,
+- .phylink_mac_config = mt7530_phylink_mac_config,
++ .phylink_validate = mt753x_phylink_validate,
++ .phylink_mac_link_state = mt753x_phylink_mac_link_state,
++ .phylink_mac_config = mt753x_phylink_mac_config,
+ .phylink_mac_link_down = mt7530_phylink_mac_link_down,
+ .phylink_mac_link_up = mt7530_phylink_mac_link_up,
+ .get_mac_eee = mt7530_get_mac_eee,
+ .set_mac_eee = mt7530_set_mac_eee,
+ };
+
++static const struct mt753x_info mt753x_table[] = {
++ [ID_MT7621] = {
++ .id = ID_MT7621,
++ .sw_setup = mt7530_setup,
++ .phy_read = mt7530_phy_read,
++ .phy_write = mt7530_phy_write,
++ .pad_setup = mt7530_pad_clk_setup,
++ .phy_mode_supported = mt7530_phy_mode_supported,
++ .mac_port_validate = mt7530_mac_port_validate,
++ .mac_port_get_state = mt7530_phylink_mac_link_state,
++ .mac_port_config = mt7530_mac_config,
++ },
++ [ID_MT7530] = {
++ .id = ID_MT7530,
++ .sw_setup = mt7530_setup,
++ .phy_read = mt7530_phy_read,
++ .phy_write = mt7530_phy_write,
++ .pad_setup = mt7530_pad_clk_setup,
++ .phy_mode_supported = mt7530_phy_mode_supported,
++ .mac_port_validate = mt7530_mac_port_validate,
++ .mac_port_get_state = mt7530_phylink_mac_link_state,
++ .mac_port_config = mt7530_mac_config,
++ },
++};
++
+ static const struct of_device_id mt7530_of_match[] = {
+- { .compatible = "mediatek,mt7621", .data = (void *)ID_MT7621, },
+- { .compatible = "mediatek,mt7530", .data = (void *)ID_MT7530, },
++ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
++ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
+ { /* sentinel */ },
+ };
+ MODULE_DEVICE_TABLE(of, mt7530_of_match);
+@@ -1673,8 +1796,21 @@ mt7530_probe(struct mdio_device *mdiodev
+ /* Get the hardware identifier from the devicetree node.
+ * We will need it for some of the clock and regulator setup.
+ */
+- priv->id = (unsigned int)(unsigned long)
+- of_device_get_match_data(&mdiodev->dev);
++ priv->info = of_device_get_match_data(&mdiodev->dev);
++ if (!priv->info)
++ return -EINVAL;
++
++ /* Sanity check if these required device operations are filled
++ * properly.
++ */
++ if (!priv->info->sw_setup || !priv->info->pad_setup ||
++ !priv->info->phy_read || !priv->info->phy_write ||
++ !priv->info->phy_mode_supported ||
++ !priv->info->mac_port_validate ||
++ !priv->info->mac_port_get_state || !priv->info->mac_port_config)
++ return -EINVAL;
++
++ priv->id = priv->info->id;
+
+ if (priv->id == ID_MT7530) {
+ priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -11,7 +11,7 @@
+ #define MT7530_NUM_FDB_RECORDS 2048
+ #define MT7530_ALL_MEMBERS 0xff
+
+-enum {
++enum mt753x_id {
+ ID_MT7530 = 0,
+ ID_MT7621 = 1,
+ };
+@@ -451,6 +451,40 @@ static const char *p5_intf_modes(unsigne
+ }
+ }
+
++/* struct mt753x_info - This is the main data structure for holding the specific
++ * part for each supported device
++ * @sw_setup: Holding the handler to a device initialization
++ * @phy_read: Holding the way reading PHY port
++ * @phy_write: Holding the way writing PHY port
++ * @pad_setup: Holding the way setting up the bus pad for a certain
++ * MAC port
++ * @phy_mode_supported: Check if the PHY type is being supported on a certain
++ * port
++ * @mac_port_validate: Holding the way to set addition validate type for a
++ * certan MAC port
++ * @mac_port_get_state: Holding the way getting the MAC/PCS state for a certain
++ * MAC port
++ * @mac_port_config: Holding the way setting up the PHY attribute to a
++ * certain MAC port
++ */
++struct mt753x_info {
++ enum mt753x_id id;
++
++ int (*sw_setup)(struct dsa_switch *ds);
++ int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
++ int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
++ int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
++ bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
++ const struct phylink_link_state *state);
++ void (*mac_port_validate)(struct dsa_switch *ds, int port,
++ unsigned long *supported);
++ int (*mac_port_get_state)(struct dsa_switch *ds, int port,
++ struct phylink_link_state *state);
++ int (*mac_port_config)(struct dsa_switch *ds, int port,
++ unsigned int mode,
++ phy_interface_t interface);
++};
++
+ /* struct mt7530_priv - This is the main data structure for holding the state
+ * of the driver
+ * @dev: The device pointer
+@@ -476,6 +510,7 @@ struct mt7530_priv {
+ struct regulator *core_pwr;
+ struct regulator *io_pwr;
+ struct gpio_desc *reset;
++ const struct mt753x_info *info;
+ unsigned int id;
+ bool mcm;
+ phy_interface_t p6_interface;
diff --git a/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch b/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
new file mode 100644
index 0000000000..1e6126eb7f
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0604-net-dsa-mt7530-Add-the-support-of-MT7531-switch.patch
@@ -0,0 +1,1510 @@
+From: Landen Chao <landen.chao@mediatek.com>
+Date: Fri, 4 Sep 2020 22:21:59 +0800
+Subject: [PATCH] net: dsa: mt7530: Add the support of MT7531 switch
+
+Add new support for MT7531:
+
+MT7531 is the next generation of MT7530. It is also a 7-ports switch with
+5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu
+port 6 only supports SGMII interface. Cpu port 5 supports either RGMII
+or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like
+mt7530. Due to SGMII interface support, pll, and pad setting are different
+from MT7530. This patch adds different initial setting, and SGMII phylink
+handlers of MT7531.
+
+MT7531 SGMII interface can be configured in following mode:
+- 'SGMII AN mode' with in-band negotiation capability
+ which is compatible with PHY_INTERFACE_MODE_SGMII.
+- 'SGMII force mode' without in-band negotiation
+ which is compatible with 10B/8B encoding of
+ PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
+- 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
+ which is compatible with 10B/8B encoding of
+ PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
+
+Signed-off-by: Landen Chao <landen.chao@mediatek.com>
+Signed-off-by: Sean Wang <sean.wang@mediatek.com>
+---
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -234,6 +234,12 @@ mt7530_write(struct mt7530_priv *priv, u
+ }
+
+ static u32
++_mt7530_unlocked_read(struct mt7530_dummy_poll *p)
++{
++ return mt7530_mii_read(p->priv, p->reg);
++}
++
++static u32
+ _mt7530_read(struct mt7530_dummy_poll *p)
+ {
+ struct mii_bus *bus = p->priv->bus;
+@@ -483,6 +489,108 @@ mt7530_pad_clk_setup(struct dsa_switch *
+ return 0;
+ }
+
++static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
++{
++ u32 val;
++
++ val = mt7530_read(priv, MT7531_TOP_SIG_SR);
++
++ return (val & PAD_DUAL_SGMII_EN) != 0;
++}
++
++static int
++mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
++{
++ struct mt7530_priv *priv = ds->priv;
++ u32 val;
++ u32 top_sig;
++ u32 hwstrap;
++ u32 xtal;
++
++ if (mt7531_dual_sgmii_supported(priv))
++ return 0;
++
++ val = mt7530_read(priv, MT7531_CREV);
++ top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
++ hwstrap = mt7530_read(priv, MT7531_HWTRAP);
++ if ((val & CHIP_REV_M) > 0)
++ xtal = (top_sig & PAD_MCM_SMI_EN) ? HWTRAP_XTAL_FSEL_40MHZ :
++ HWTRAP_XTAL_FSEL_25MHZ;
++ else
++ xtal = hwstrap & HWTRAP_XTAL_FSEL_MASK;
++
++ /* Step 1 : Disable MT7531 COREPLL */
++ val = mt7530_read(priv, MT7531_PLLGP_EN);
++ val &= ~EN_COREPLL;
++ mt7530_write(priv, MT7531_PLLGP_EN, val);
++
++ /* Step 2: switch to XTAL output */
++ val = mt7530_read(priv, MT7531_PLLGP_EN);
++ val |= SW_CLKSW;
++ mt7530_write(priv, MT7531_PLLGP_EN, val);
++
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val &= ~RG_COREPLL_EN;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++
++ /* Step 3: disable PLLGP and enable program PLLGP */
++ val = mt7530_read(priv, MT7531_PLLGP_EN);
++ val |= SW_PLLGP;
++ mt7530_write(priv, MT7531_PLLGP_EN, val);
++
++ /* Step 4: program COREPLL output frequency to 500MHz */
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val &= ~RG_COREPLL_POSDIV_M;
++ val |= 2 << RG_COREPLL_POSDIV_S;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++ usleep_range(25, 35);
++
++ switch (xtal) {
++ case HWTRAP_XTAL_FSEL_25MHZ:
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val &= ~RG_COREPLL_SDM_PCW_M;
++ val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++ break;
++ case HWTRAP_XTAL_FSEL_40MHZ:
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val &= ~RG_COREPLL_SDM_PCW_M;
++ val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++ break;
++ };
++
++ /* Set feedback divide ratio update signal to high */
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val |= RG_COREPLL_SDM_PCW_CHG;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++ /* Wait for at least 16 XTAL clocks */
++ usleep_range(10, 20);
++
++ /* Step 5: set feedback divide ratio update signal to low */
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val &= ~RG_COREPLL_SDM_PCW_CHG;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++
++ /* Enable 325M clock for SGMII */
++ mt7530_write(priv, MT7531_ANA_PLLGP_CR5, 0xad0000);
++
++ /* Enable 250SSC clock for RGMII */
++ mt7530_write(priv, MT7531_ANA_PLLGP_CR2, 0x4f40000);
++
++ /* Step 6: Enable MT7531 PLL */
++ val = mt7530_read(priv, MT7531_PLLGP_CR0);
++ val |= RG_COREPLL_EN;
++ mt7530_write(priv, MT7531_PLLGP_CR0, val);
++
++ val = mt7530_read(priv, MT7531_PLLGP_EN);
++ val |= EN_COREPLL;
++ mt7530_write(priv, MT7531_PLLGP_EN, val);
++ usleep_range(25, 35);
++
++ return 0;
++}
++
+ static void
+ mt7530_mib_reset(struct dsa_switch *ds)
+ {
+@@ -507,6 +615,217 @@ static int mt7530_phy_write(struct dsa_s
+ return mdiobus_write_nested(priv->bus, port, regnum, val);
+ }
+
++static int
++mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad,
++ int regnum)
++{
++ struct mii_bus *bus = priv->bus;
++ struct mt7530_dummy_poll p;
++ u32 reg, val;
++ int ret;
++
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
++
++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
++ MT7531_MDIO_DEV_ADDR(devad) | regnum;
++ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ reg = MT7531_MDIO_CL45_READ | MT7531_MDIO_PHY_ADDR(port) |
++ MT7531_MDIO_DEV_ADDR(devad);
++ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ ret = val & MT7531_MDIO_RW_DATA_MASK;
++out:
++ mutex_unlock(&bus->mdio_lock);
++
++ return ret;
++}
++
++static int
++mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad,
++ int regnum, u32 data)
++{
++ struct mii_bus *bus = priv->bus;
++ struct mt7530_dummy_poll p;
++ u32 val, reg;
++ int ret;
++
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
++
++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ reg = MT7531_MDIO_CL45_ADDR | MT7531_MDIO_PHY_ADDR(port) |
++ MT7531_MDIO_DEV_ADDR(devad) | regnum;
++ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ reg = MT7531_MDIO_CL45_WRITE | MT7531_MDIO_PHY_ADDR(port) |
++ MT7531_MDIO_DEV_ADDR(devad) | data;
++ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++out:
++ mutex_unlock(&bus->mdio_lock);
++
++ return ret;
++}
++
++static int
++mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum)
++{
++ struct mii_bus *bus = priv->bus;
++ struct mt7530_dummy_poll p;
++ int ret;
++ u32 val;
++
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
++
++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ val = MT7531_MDIO_CL22_READ | MT7531_MDIO_PHY_ADDR(port) |
++ MT7531_MDIO_REG_ADDR(regnum);
++
++ mt7530_mii_write(priv, MT7531_PHY_IAC, val | MT7531_PHY_ACS_ST);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val,
++ !(val & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ ret = val & MT7531_MDIO_RW_DATA_MASK;
++out:
++ mutex_unlock(&bus->mdio_lock);
++
++ return ret;
++}
++
++static int
++mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum,
++ u16 data)
++{
++ struct mii_bus *bus = priv->bus;
++ struct mt7530_dummy_poll p;
++ int ret;
++ u32 reg;
++
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT7531_PHY_IAC);
++
++ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
++ !(reg & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++ reg = MT7531_MDIO_CL22_WRITE | MT7531_MDIO_PHY_ADDR(port) |
++ MT7531_MDIO_REG_ADDR(regnum) | data;
++
++ mt7530_mii_write(priv, MT7531_PHY_IAC, reg | MT7531_PHY_ACS_ST);
++
++ ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg,
++ !(reg & MT7531_PHY_ACS_ST), 20, 100000);
++ if (ret < 0) {
++ dev_err(priv->dev, "poll timeout\n");
++ goto out;
++ }
++
++out:
++ mutex_unlock(&bus->mdio_lock);
++
++ return ret;
++}
++
++static int
++mt7531_ind_phy_read(struct dsa_switch *ds, int port, int regnum)
++{
++ struct mt7530_priv *priv = ds->priv;
++ int devad;
++ int ret;
++
++ if (regnum & MII_ADDR_C45) {
++ devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f;
++ ret = mt7531_ind_c45_phy_read(priv, port, devad,
++ regnum & MII_REGADDR_C45_MASK);
++ } else {
++ ret = mt7531_ind_c22_phy_read(priv, port, regnum);
++ }
++
++ return ret;
++}
++
++static int
++mt7531_ind_phy_write(struct dsa_switch *ds, int port, int regnum,
++ u16 data)
++{
++ struct mt7530_priv *priv = ds->priv;
++ int devad;
++ int ret;
++
++ if (regnum & MII_ADDR_C45) {
++ devad = (regnum >> MII_DEVADDR_C45_SHIFT) & 0x1f;
++ ret = mt7531_ind_c45_phy_write(priv, port, devad,
++ regnum & MII_REGADDR_C45_MASK,
++ data);
++ } else {
++ ret = mt7531_ind_c22_phy_write(priv, port, regnum, data);
++ }
++
++ return ret;
++}
++
+ static void
+ mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+@@ -623,9 +942,14 @@ unlock_exit:
+ }
+
+ static int
+-mt7530_cpu_port_enable(struct mt7530_priv *priv,
+- int port)
++mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
+ {
++ struct mt7530_priv *priv = ds->priv;
++
++ /* Setup max capability of CPU port at first */
++ if (priv->info->cpu_port_config)
++ priv->info->cpu_port_config(ds, port);
++
+ /* Enable Mediatek header mode on the cpu port */
+ mt7530_write(priv, MT7530_PVC_P(port),
+ PORT_SPEC_TAG);
+@@ -638,7 +962,7 @@ mt7530_cpu_port_enable(struct mt7530_pri
+ mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port));
+
+ /* CPU port gets connected to all user ports of
+- * the switch
++ * the switch.
+ */
+ mt7530_write(priv, MT7530_PCR_P(port),
+ PCR_MATRIX(dsa_user_ports(priv->ds)));
+@@ -1132,27 +1456,42 @@ mt7530_port_vlan_del(struct dsa_switch *
+ return 0;
+ }
+
+-static int mt7530_port_mirror_add(struct dsa_switch *ds, int port,
++static int mt753x_mirror_port_get(unsigned int id, u32 val)
++{
++ return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) :
++ MIRROR_PORT(val);
++}
++
++static int mt753x_mirror_port_set(unsigned int id, u32 val)
++{
++ return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) :
++ MIRROR_PORT(val);
++}
++
++static int mt753x_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress)
+ {
+ struct mt7530_priv *priv = ds->priv;
++ int monitor_port;
+ u32 val;
+
+ /* Check for existent entry */
+ if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
+ return -EEXIST;
+
+- val = mt7530_read(priv, MT7530_MFC);
++ val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
+
+ /* MT7530 only supports one monitor port */
+- if (val & MIRROR_EN && MIRROR_PORT(val) != mirror->to_local_port)
++ monitor_port = mt753x_mirror_port_get(priv->id, val);
++ if (val & MT753X_MIRROR_EN(priv->id) &&
++ monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+- val |= MIRROR_EN;
+- val &= ~MIRROR_MASK;
+- val |= mirror->to_local_port;
+- mt7530_write(priv, MT7530_MFC, val);
++ val |= MT753X_MIRROR_EN(priv->id);
++ val &= ~MT753X_MIRROR_MASK(priv->id);
++ val |= mt753x_mirror_port_set(priv->id, mirror->to_local_port);
++ mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
+
+ val = mt7530_read(priv, MT7530_PCR_P(port));
+ if (ingress) {
+@@ -1167,7 +1506,7 @@ static int mt7530_port_mirror_add(struct
+ return 0;
+ }
+
+-static void mt7530_port_mirror_del(struct dsa_switch *ds, int port,
++static void mt753x_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+ {
+ struct mt7530_priv *priv = ds->priv;
+@@ -1184,9 +1523,9 @@ static void mt7530_port_mirror_del(struc
+ mt7530_write(priv, MT7530_PCR_P(port), val);
+
+ if (!priv->mirror_rx && !priv->mirror_tx) {
+- val = mt7530_read(priv, MT7530_MFC);
+- val &= ~MIRROR_EN;
+- mt7530_write(priv, MT7530_MFC, val);
++ val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id));
++ val &= ~MT753X_MIRROR_EN(priv->id);
++ mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val);
+ }
+ }
+
+@@ -1292,7 +1631,7 @@ mt7530_setup(struct dsa_switch *ds)
+ PCR_MATRIX_CLR);
+
+ if (dsa_is_cpu_port(ds, i))
+- mt7530_cpu_port_enable(priv, i);
++ mt753x_cpu_port_enable(ds, i);
+ else
+ mt7530_port_disable(ds, i);
+
+@@ -1346,6 +1685,118 @@ mt7530_setup(struct dsa_switch *ds)
+ return 0;
+ }
+
++static int
++mt7531_setup(struct dsa_switch *ds)
++{
++ struct mt7530_priv *priv = ds->priv;
++ struct mt7530_dummy_poll p;
++ u32 val, id;
++ int ret, i;
++
++ /* Reset whole chip through gpio pin or memory-mapped registers for
++ * different type of hardware
++ */
++ if (priv->mcm) {
++ reset_control_assert(priv->rstc);
++ usleep_range(1000, 1100);
++ reset_control_deassert(priv->rstc);
++ } else {
++ gpiod_set_value_cansleep(priv->reset, 0);
++ usleep_range(1000, 1100);
++ gpiod_set_value_cansleep(priv->reset, 1);
++ }
++
++ /* Waiting for MT7530 got to stable */
++ INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
++ ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
++ 20, 1000000);
++ if (ret < 0) {
++ dev_err(priv->dev, "reset timeout\n");
++ return ret;
++ }
++
++ id = mt7530_read(priv, MT7531_CREV);
++ id >>= CHIP_NAME_SHIFT;
++
++ if (id != MT7531_ID) {
++ dev_err(priv->dev, "chip %x can't be supported\n", id);
++ return -ENODEV;
++ }
++
++ /* Reset the switch through internal reset */
++ mt7530_write(priv, MT7530_SYS_CTRL,
++ SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
++ SYS_CTRL_REG_RST);
++
++ if (mt7531_dual_sgmii_supported(priv)) {
++ priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
++
++ /* Let ds->slave_mii_bus be able to access external phy. */
++ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
++ MT7531_EXT_P_MDC_11);
++ mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
++ MT7531_EXT_P_MDIO_12);
++ } else {
++ priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
++ }
++ dev_dbg(ds->dev, "P5 support %s interface\n",
++ p5_intf_modes(priv->p5_intf_sel));
++
++ mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
++ MT7531_GPIO0_INTERRUPT);
++
++ /* Let phylink decide the interface later. */
++ priv->p5_interface = PHY_INTERFACE_MODE_NA;
++ priv->p6_interface = PHY_INTERFACE_MODE_NA;
++
++ /* Enable PHY core PLL, since phy_device has not yet been created
++ * provided for phy_[read,write]_mmd_indirect is called, we provide
++ * our own mt7531_ind_mmd_phy_[read,write] to complete this
++ * function.
++ */
++ val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
++ MDIO_MMD_VEND2, CORE_PLL_GROUP4);
++ val |= MT7531_PHY_PLL_BYPASS_MODE;
++ val &= ~MT7531_PHY_PLL_OFF;
++ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
++ CORE_PLL_GROUP4, val);
++
++ /* BPDU to CPU port */
++ mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
++ BIT(MT7530_CPU_PORT));
++ mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
++ MT753X_BPDU_CPU_ONLY);
++
++ /* Enable and reset MIB counters */
++ mt7530_mib_reset(ds);
++
++ for (i = 0; i < MT7530_NUM_PORTS; i++) {
++ /* Disable forwarding by default on all ports */
++ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
++ PCR_MATRIX_CLR);
++
++ mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR);
++
++ if (dsa_is_cpu_port(ds, i))
++ mt753x_cpu_port_enable(ds, i);
++ else
++ mt7530_port_disable(ds, i);
++
++ /* Enable consistent egress tag */
++ mt7530_rmw(priv, MT7530_PVC_P(i), PVC_EG_TAG_MASK,
++ PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT));
++ }
++
++ ds->configure_vlan_while_not_filtering = true;
++
++ /* Flush the FDB table */
++ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
++ if (ret < 0)
++ return ret;
++
++ return 0;
++}
++
+ static bool
+ mt7530_phy_mode_supported(struct dsa_switch *ds, int port,
+ const struct phylink_link_state *state)
+@@ -1384,6 +1835,47 @@ unsupported:
+ return false;
+ }
+
++static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
++{
++ return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
++}
++
++static bool
++mt7531_phy_supported(struct dsa_switch *ds, int port,
++ const struct phylink_link_state *state)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ switch (port) {
++ case 0: /* Internal phy */
++ case 1:
++ case 2:
++ case 3:
++ case 4:
++ if (state->interface != PHY_INTERFACE_MODE_GMII)
++ goto unsupported;
++ break;
++ case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
++ if (mt7531_is_rgmii_port(priv, port))
++ return phy_interface_mode_is_rgmii(state->interface);
++ fallthrough;
++ case 6: /* 1st cpu port supports sgmii/8023z only */
++ if (state->interface != PHY_INTERFACE_MODE_SGMII &&
++ !phy_interface_mode_is_8023z(state->interface))
++ goto unsupported;
++ break;
++ default:
++ dev_err(priv->dev, "%s: unsupported port: %i\n", __func__,
++ port);
++ goto unsupported;
++ }
++
++ return true;
++
++unsupported:
++ return false;
++}
++
+ static bool
+ mt753x_phy_mode_supported(struct dsa_switch *ds, int port,
+ const struct phylink_link_state *state)
+@@ -1416,6 +1908,227 @@ mt7530_mac_config(struct dsa_switch *ds,
+ return 0;
+ }
+
++static int mt7531_rgmii_setup(struct mt7530_priv *priv, u32 port,
++ phy_interface_t interface,
++ struct phy_device *phydev)
++{
++ u32 val;
++
++ if (!mt7531_is_rgmii_port(priv, port)) {
++ dev_err(priv->dev, "RGMII mode is not available for port %d\n",
++ port);
++ return -EINVAL;
++ }
++
++ val = mt7530_read(priv, MT7531_CLKGEN_CTRL);
++ val |= GP_CLK_EN;
++ val &= ~GP_MODE_MASK;
++ val |= GP_MODE(MT7531_GP_MODE_RGMII);
++ val &= ~CLK_SKEW_IN_MASK;
++ val |= CLK_SKEW_IN(MT7531_CLK_SKEW_NO_CHG);
++ val &= ~CLK_SKEW_OUT_MASK;
++ val |= CLK_SKEW_OUT(MT7531_CLK_SKEW_NO_CHG);
++ val |= TXCLK_NO_REVERSE | RXCLK_NO_DELAY;
++
++ /* Do not adjust rgmii delay when vendor phy driver presents. */
++ if (!phydev || phy_driver_is_genphy(phydev)) {
++ val &= ~(TXCLK_NO_REVERSE | RXCLK_NO_DELAY);
++ switch (interface) {
++ case PHY_INTERFACE_MODE_RGMII:
++ val |= TXCLK_NO_REVERSE;
++ val |= RXCLK_NO_DELAY;
++ break;
++ case PHY_INTERFACE_MODE_RGMII_RXID:
++ val |= TXCLK_NO_REVERSE;
++ break;
++ case PHY_INTERFACE_MODE_RGMII_TXID:
++ val |= RXCLK_NO_DELAY;
++ break;
++ case PHY_INTERFACE_MODE_RGMII_ID:
++ break;
++ default:
++ return -EINVAL;
++ }
++ }
++ mt7530_write(priv, MT7531_CLKGEN_CTRL, val);
++
++ return 0;
++}
++
++static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
++ unsigned long *supported)
++{
++ /* Port5 supports ethier RGMII or SGMII.
++ * Port6 supports SGMII only.
++ */
++ switch (port) {
++ case 5:
++ if (mt7531_is_rgmii_port(priv, port))
++ break;
++ fallthrough;
++ case 6:
++ phylink_set(supported, 1000baseX_Full);
++ phylink_set(supported, 2500baseX_Full);
++ phylink_set(supported, 2500baseT_Full);
++ }
++}
++
++static void
++mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex)
++{
++ struct mt7530_priv *priv = ds->priv;
++ unsigned int val;
++
++ /* For adjusting speed and duplex of SGMII force mode. */
++ if (interface != PHY_INTERFACE_MODE_SGMII ||
++ phylink_autoneg_inband(mode))
++ return;
++
++ /* SGMII force mode setting */
++ val = mt7530_read(priv, MT7531_SGMII_MODE(port));
++ val &= ~MT7531_SGMII_IF_MODE_MASK;
++
++ switch (speed) {
++ case SPEED_10:
++ val |= MT7531_SGMII_FORCE_SPEED_10;
++ break;
++ case SPEED_100:
++ val |= MT7531_SGMII_FORCE_SPEED_100;
++ break;
++ case SPEED_1000:
++ val |= MT7531_SGMII_FORCE_SPEED_1000;
++ break;
++ }
++
++ /* MT7531 SGMII 1G force mode can only work in full duplex mode,
++ * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
++ */
++ if ((speed == SPEED_10 || speed == SPEED_100) &&
++ duplex != DUPLEX_FULL)
++ val |= MT7531_SGMII_FORCE_HALF_DUPLEX;
++
++ mt7530_write(priv, MT7531_SGMII_MODE(port), val);
++}
++
++static bool mt753x_is_mac_port(u32 port)
++{
++ return (port == 5 || port == 6);
++}
++
++static int mt7531_sgmii_setup_mode_force(struct mt7530_priv *priv, u32 port,
++ phy_interface_t interface)
++{
++ u32 val;
++
++ if (!mt753x_is_mac_port(port))
++ return -EINVAL;
++
++ mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
++ MT7531_SGMII_PHYA_PWD);
++
++ val = mt7530_read(priv, MT7531_PHYA_CTRL_SIGNAL3(port));
++ val &= ~MT7531_RG_TPHY_SPEED_MASK;
++ /* Setup 2.5 times faster clock for 2.5Gbps data speeds with 10B/8B
++ * encoding.
++ */
++ val |= (interface == PHY_INTERFACE_MODE_2500BASEX) ?
++ MT7531_RG_TPHY_SPEED_3_125G : MT7531_RG_TPHY_SPEED_1_25G;
++ mt7530_write(priv, MT7531_PHYA_CTRL_SIGNAL3(port), val);
++
++ mt7530_clear(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
++
++ /* MT7531 SGMII 1G and 2.5G force mode can only work in full duplex
++ * mode, no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not.
++ */
++ mt7530_rmw(priv, MT7531_SGMII_MODE(port),
++ MT7531_SGMII_IF_MODE_MASK | MT7531_SGMII_REMOTE_FAULT_DIS,
++ MT7531_SGMII_FORCE_SPEED_1000);
++
++ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
++
++ return 0;
++}
++
++static int mt7531_sgmii_setup_mode_an(struct mt7530_priv *priv, int port,
++ phy_interface_t interface)
++{
++ if (!mt753x_is_mac_port(port))
++ return -EINVAL;
++
++ mt7530_set(priv, MT7531_QPHY_PWR_STATE_CTRL(port),
++ MT7531_SGMII_PHYA_PWD);
++
++ mt7530_rmw(priv, MT7531_PHYA_CTRL_SIGNAL3(port),
++ MT7531_RG_TPHY_SPEED_MASK, MT7531_RG_TPHY_SPEED_1_25G);
++
++ mt7530_set(priv, MT7531_SGMII_MODE(port),
++ MT7531_SGMII_REMOTE_FAULT_DIS |
++ MT7531_SGMII_SPEED_DUPLEX_AN);
++
++ mt7530_rmw(priv, MT7531_PCS_SPEED_ABILITY(port),
++ MT7531_SGMII_TX_CONFIG_MASK, 1);
++
++ mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_ENABLE);
++
++ mt7530_set(priv, MT7531_PCS_CONTROL_1(port), MT7531_SGMII_AN_RESTART);
++
++ mt7530_write(priv, MT7531_QPHY_PWR_STATE_CTRL(port), 0);
++
++ return 0;
++}
++
++static void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port)
++{
++ struct mt7530_priv *priv = ds->priv;
++ u32 val;
++
++ /* Only restart AN when AN is enabled */
++ val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
++ if (val & MT7531_SGMII_AN_ENABLE) {
++ val |= MT7531_SGMII_AN_RESTART;
++ mt7530_write(priv, MT7531_PCS_CONTROL_1(port), val);
++ }
++}
++
++static int
++mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
++ phy_interface_t interface)
++{
++ struct mt7530_priv *priv = ds->priv;
++ struct phy_device *phydev;
++ const struct dsa_port *dp;
++
++ if (!mt753x_is_mac_port(port)) {
++ dev_err(priv->dev, "port %d is not a MAC port\n", port);
++ return -EINVAL;
++ }
++
++ switch (interface) {
++ case PHY_INTERFACE_MODE_RGMII:
++ case PHY_INTERFACE_MODE_RGMII_ID:
++ case PHY_INTERFACE_MODE_RGMII_RXID:
++ case PHY_INTERFACE_MODE_RGMII_TXID:
++ dp = dsa_to_port(ds, port);
++ phydev = dp->slave->phydev;
++ return mt7531_rgmii_setup(priv, port, interface, phydev);
++ case PHY_INTERFACE_MODE_SGMII:
++ return mt7531_sgmii_setup_mode_an(priv, port, interface);
++ case PHY_INTERFACE_MODE_NA:
++ case PHY_INTERFACE_MODE_1000BASEX:
++ case PHY_INTERFACE_MODE_2500BASEX:
++ if (phylink_autoneg_inband(mode))
++ return -EINVAL;
++
++ return mt7531_sgmii_setup_mode_force(priv, port, interface);
++ default:
++ return -EINVAL;
++ }
++
++ return -EINVAL;
++}
++
+ static int
+ mt753x_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+ const struct phylink_link_state *state)
+@@ -1451,6 +2164,8 @@ mt753x_phylink_mac_config(struct dsa_swi
+ if (mt753x_mac_config(ds, port, mode, state) < 0)
+ goto unsupported;
+
++ if (priv->p5_intf_sel != P5_DISABLED)
++ priv->p5_interface = state->interface;
+ break;
+ case 6: /* 1st cpu port */
+ if (priv->p6_interface == state->interface)
+@@ -1470,7 +2185,8 @@ unsupported:
+ return;
+ }
+
+- if (phylink_autoneg_inband(mode)) {
++ if (phylink_autoneg_inband(mode) &&
++ state->interface != PHY_INTERFACE_MODE_SGMII) {
+ dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
+ __func__);
+ return;
+@@ -1480,7 +2196,7 @@ unsupported:
+ mcr_new = mcr_cur;
+ mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
+ mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
+- PMCR_BACKPR_EN | PMCR_FORCE_MODE;
++ PMCR_BACKPR_EN | PMCR_FORCE_MODE_ID(priv->id);
+
+ /* Are we connected to external phy */
+ if (port == 5 && dsa_is_user_port(ds, 5))
+@@ -1490,7 +2206,18 @@ unsupported:
+ mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
+ }
+
+-static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port,
++static void
++mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ if (!priv->info->mac_pcs_an_restart)
++ return;
++
++ priv->info->mac_pcs_an_restart(ds, port);
++}
++
++static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+ {
+@@ -1499,7 +2226,19 @@ static void mt7530_phylink_mac_link_down
+ mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
+ }
+
+-static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
++static void mt753x_mac_pcs_link_up(struct dsa_switch *ds, int port,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ if (!priv->info->mac_pcs_link_up)
++ return;
++
++ priv->info->mac_pcs_link_up(ds, port, mode, interface, speed, duplex);
++}
++
++static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev,
+@@ -1509,18 +2248,29 @@ static void mt7530_phylink_mac_link_up(s
+ struct mt7530_priv *priv = ds->priv;
+ u32 mcr;
+
++ mt753x_mac_pcs_link_up(ds, port, mode, interface, speed, duplex);
++
+ mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
+
++ /* MT753x MAC works in 1G full duplex mode for all up-clocked
++ * variants.
++ */
++ if (interface == PHY_INTERFACE_MODE_TRGMII ||
++ (phy_interface_mode_is_8023z(interface))) {
++ speed = SPEED_1000;
++ duplex = DUPLEX_FULL;
++ }
++
+ switch (speed) {
+ case SPEED_1000:
+ mcr |= PMCR_FORCE_SPEED_1000;
+ if (priv->eee_enable & BIT(port))
+- mcr_new |= PMCR_FORCE_EEE1G;
++ mcr |= PMCR_FORCE_EEE1G;
+ break;
+ case SPEED_100:
+ mcr |= PMCR_FORCE_SPEED_100;
+ if (priv->eee_enable & BIT(port))
+- mcr_new |= PMCR_FORCE_EEE100;
++ mcr |= PMCR_FORCE_EEE100;
+ break;
+ }
+ if (duplex == DUPLEX_FULL) {
+@@ -1534,6 +2284,45 @@ static void mt7530_phylink_mac_link_up(s
+ mt7530_set(priv, MT7530_PMCR_P(port), mcr);
+ }
+
++static int
++mt7531_cpu_port_config(struct dsa_switch *ds, int port)
++{
++ struct mt7530_priv *priv = ds->priv;
++ phy_interface_t interface;
++ int speed;
++
++ switch (port) {
++ case 5:
++ if (mt7531_is_rgmii_port(priv, port))
++ interface = PHY_INTERFACE_MODE_RGMII;
++ else
++ interface = PHY_INTERFACE_MODE_2500BASEX;
++
++ priv->p5_interface = interface;
++ break;
++ case 6:
++ interface = PHY_INTERFACE_MODE_2500BASEX;
++
++ mt7531_pad_setup(ds, interface);
++
++ priv->p6_interface = interface;
++ break;
++ };
++
++ if (interface == PHY_INTERFACE_MODE_2500BASEX)
++ speed = SPEED_2500;
++ else
++ speed = SPEED_1000;
++
++ mt7531_mac_config(ds, port, MLO_AN_FIXED, interface);
++ mt7530_write(priv, MT7530_PMCR_P(port),
++ PMCR_CPU_PORT_SETTING(priv->id));
++ mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
++ speed, DUPLEX_FULL, true, true);
++
++ return 0;
++}
++
+ static void
+ mt7530_mac_port_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported)
+@@ -1542,6 +2331,14 @@ mt7530_mac_port_validate(struct dsa_swit
+ phylink_set(supported, 1000baseX_Full);
+ }
+
++static void mt7531_mac_port_validate(struct dsa_switch *ds, int port,
++ unsigned long *supported)
++{
++ struct mt7530_priv *priv = ds->priv;
++
++ mt7531_sgmii_validate(priv, port, supported);
++}
++
+ static void
+ mt753x_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+@@ -1558,7 +2355,8 @@ mt753x_phylink_validate(struct dsa_switc
+
+ phylink_set_port_modes(mask);
+
+- if (state->interface != PHY_INTERFACE_MODE_TRGMII) {
++ if (state->interface != PHY_INTERFACE_MODE_TRGMII ||
++ !phy_interface_mode_is_8023z(state->interface)) {
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+@@ -1577,6 +2375,11 @@ mt753x_phylink_validate(struct dsa_switc
+
+ linkmode_and(supported, supported, mask);
+ linkmode_and(state->advertising, state->advertising, mask);
++
++ /* We can only operate at 2500BaseX or 1000BaseX. If requested
++ * to advertise both, only report advertising at 2500BaseX.
++ */
++ phylink_helper_basex_speed(state);
+ }
+
+ static int
+@@ -1667,6 +2470,63 @@ static int mt7530_set_mac_eee(struct dsa
+ return 0;
+ }
+
++#ifdef notyet
++static int
++mt7531_sgmii_pcs_get_state_an(struct mt7530_priv *priv, int port,
++ struct phylink_link_state *state)
++{
++ u32 status, val;
++ u16 config_reg;
++
++ status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
++ state->link = !!(status & MT7531_SGMII_LINK_STATUS);
++ if (state->interface == PHY_INTERFACE_MODE_SGMII &&
++ (status & MT7531_SGMII_AN_ENABLE)) {
++ val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
++ config_reg = val >> 16;
++
++ switch (config_reg & LPA_SGMII_SPD_MASK) {
++ case LPA_SGMII_1000:
++ state->speed = SPEED_1000;
++ break;
++ case LPA_SGMII_100:
++ state->speed = SPEED_100;
++ break;
++ case LPA_SGMII_10:
++ state->speed = SPEED_10;
++ break;
++ default:
++ dev_err(priv->dev, "invalid sgmii PHY speed\n");
++ state->link = false;
++ return -EINVAL;
++ }
++
++ if (config_reg & LPA_SGMII_FULL_DUPLEX)
++ state->duplex = DUPLEX_FULL;
++ else
++ state->duplex = DUPLEX_HALF;
++ }
++
++ return 0;
++}
++#endif
++
++static int
++mt7531_phylink_mac_link_state(struct dsa_switch *ds, int port,
++ struct phylink_link_state *state)
++{
++#ifdef notyet
++ struct mt7530_priv *priv = ds->priv;
++
++ if (state->interface == PHY_INTERFACE_MODE_SGMII)
++ return mt7531_sgmii_pcs_get_state_an(priv, port, state);
++#else
++ return mt7530_phylink_mac_link_state(ds, port, state);
++#endif
++
++ return -EOPNOTSUPP;
++}
++
+ static int
+ mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state)
+@@ -1720,13 +2580,14 @@ static const struct dsa_switch_ops mt753
+ .port_vlan_prepare = mt7530_port_vlan_prepare,
+ .port_vlan_add = mt7530_port_vlan_add,
+ .port_vlan_del = mt7530_port_vlan_del,
+- .port_mirror_add = mt7530_port_mirror_add,
+- .port_mirror_del = mt7530_port_mirror_del,
++ .port_mirror_add = mt753x_port_mirror_add,
++ .port_mirror_del = mt753x_port_mirror_del,
+ .phylink_validate = mt753x_phylink_validate,
+ .phylink_mac_link_state = mt753x_phylink_mac_link_state,
+ .phylink_mac_config = mt753x_phylink_mac_config,
+- .phylink_mac_link_down = mt7530_phylink_mac_link_down,
+- .phylink_mac_link_up = mt7530_phylink_mac_link_up,
++ .phylink_mac_an_restart = mt753x_phylink_mac_an_restart,
++ .phylink_mac_link_down = mt753x_phylink_mac_link_down,
++ .phylink_mac_link_up = mt753x_phylink_mac_link_up,
+ .get_mac_eee = mt7530_get_mac_eee,
+ .set_mac_eee = mt7530_set_mac_eee,
+ };
+@@ -1754,11 +2615,26 @@ static const struct mt753x_info mt753x_t
+ .mac_port_get_state = mt7530_phylink_mac_link_state,
+ .mac_port_config = mt7530_mac_config,
+ },
++ [ID_MT7531] = {
++ .id = ID_MT7531,
++ .sw_setup = mt7531_setup,
++ .phy_read = mt7531_ind_phy_read,
++ .phy_write = mt7531_ind_phy_write,
++ .pad_setup = mt7531_pad_setup,
++ .cpu_port_config = mt7531_cpu_port_config,
++ .phy_mode_supported = mt7531_phy_supported,
++ .mac_port_validate = mt7531_mac_port_validate,
++ .mac_port_get_state = mt7531_phylink_mac_link_state,
++ .mac_port_config = mt7531_mac_config,
++ .mac_pcs_an_restart = mt7531_sgmii_restart_an,
++ .mac_pcs_link_up = mt7531_sgmii_link_up_force,
++ },
+ };
+
+ static const struct of_device_id mt7530_of_match[] = {
+ { .compatible = "mediatek,mt7621", .data = &mt753x_table[ID_MT7621], },
+ { .compatible = "mediatek,mt7530", .data = &mt753x_table[ID_MT7530], },
++ { .compatible = "mediatek,mt7531", .data = &mt753x_table[ID_MT7531], },
+ { /* sentinel */ },
+ };
+ MODULE_DEVICE_TABLE(of, mt7530_of_match);
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -14,6 +14,7 @@
+ enum mt753x_id {
+ ID_MT7530 = 0,
+ ID_MT7621 = 1,
++ ID_MT7531 = 2,
+ };
+
+ #define NUM_TRGMII_CTRL 5
+@@ -41,6 +42,33 @@ enum mt753x_id {
+ #define MIRROR_PORT(x) ((x) & 0x7)
+ #define MIRROR_MASK 0x7
+
++/* Registers for CPU forward control */
++#define MT7531_CFC 0x4
++#define MT7531_MIRROR_EN BIT(19)
++#define MT7531_MIRROR_MASK (MIRROR_MASK << 16)
++#define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK)
++#define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16)
++#define MT7531_CPU_PMAP_MASK GENMASK(7, 0)
++
++#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \
++ MT7531_CFC : MT7530_MFC)
++#define MT753X_MIRROR_EN(id) (((id) == ID_MT7531) ? \
++ MT7531_MIRROR_EN : MIRROR_EN)
++#define MT753X_MIRROR_MASK(id) (((id) == ID_MT7531) ? \
++ MT7531_MIRROR_MASK : MIRROR_MASK)
++
++/* Registers for BPDU and PAE frame control*/
++#define MT753X_BPC 0x24
++#define MT753X_BPDU_PORT_FW_MASK GENMASK(2, 0)
++
++enum mt753x_bpdu_port_fw {
++ MT753X_BPDU_FOLLOW_MFC,
++ MT753X_BPDU_CPU_EXCLUDE = 4,
++ MT753X_BPDU_CPU_INCLUDE = 5,
++ MT753X_BPDU_CPU_ONLY = 6,
++ MT753X_BPDU_DROP = 7,
++};
++
+ /* Registers for address table access */
+ #define MT7530_ATA1 0x74
+ #define STATIC_EMP 0
+@@ -222,10 +250,30 @@ enum mt7530_vlan_port_attr {
+ #define PMCR_FORCE_LNK BIT(0)
+ #define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \
+ PMCR_FORCE_SPEED_1000)
++#define MT7531_FORCE_LNK BIT(31)
++#define MT7531_FORCE_SPD BIT(30)
++#define MT7531_FORCE_DPX BIT(29)
++#define MT7531_FORCE_RX_FC BIT(28)
++#define MT7531_FORCE_TX_FC BIT(27)
++#define MT7531_FORCE_MODE (MT7531_FORCE_LNK | \
++ MT7531_FORCE_SPD | \
++ MT7531_FORCE_DPX | \
++ MT7531_FORCE_RX_FC | \
++ MT7531_FORCE_TX_FC)
++#define PMCR_FORCE_MODE_ID(id) (((id) == ID_MT7531) ? \
++ MT7531_FORCE_MODE : \
++ PMCR_FORCE_MODE)
+ #define PMCR_LINK_SETTINGS_MASK (PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+ PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
+ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
++#define PMCR_CPU_PORT_SETTING(id) (PMCR_FORCE_MODE_ID((id)) | \
++ PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \
++ PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \
++ PMCR_TX_EN | PMCR_RX_EN | \
++ PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
++ PMCR_FORCE_SPEED_1000 | \
++ PMCR_FORCE_FDX | PMCR_FORCE_LNK)
+
+ #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100)
+ #define PMSR_EEE1G BIT(7)
+@@ -245,6 +293,10 @@ enum mt7530_vlan_port_attr {
+ #define LPI_THRESH(x) ((x & 0xFFF) << 4)
+ #define LPI_MODE_EN BIT(0)
+
++/* Register for port debug count */
++#define MT7531_DBG_CNT(x) (0x3018 + (x) * 0x100)
++#define MT7531_DIS_CLR BIT(31)
++
+ /* Register for MIB */
+ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100)
+ #define MT7530_MIB_CCR 0x4fe0
+@@ -262,12 +314,118 @@ enum mt7530_vlan_port_attr {
+ CCR_RX_OCT_CNT_BAD | \
+ CCR_TX_OCT_CNT_GOOD | \
+ CCR_TX_OCT_CNT_BAD)
++
++/* MT7531 SGMII register group */
++#define MT7531_SGMII_REG_BASE 0x5000
++#define MT7531_SGMII_REG(p, r) (MT7531_SGMII_REG_BASE + \
++ ((p) - 5) * 0x1000 + (r))
++
++/* Register forSGMII PCS_CONTROL_1 */
++#define MT7531_PCS_CONTROL_1(p) MT7531_SGMII_REG(p, 0x00)
++#define MT7531_SGMII_LINK_STATUS BIT(18)
++#define MT7531_SGMII_AN_ENABLE BIT(12)
++#define MT7531_SGMII_AN_RESTART BIT(9)
++
++/* Register for SGMII PCS_SPPED_ABILITY */
++#define MT7531_PCS_SPEED_ABILITY(p) MT7531_SGMII_REG(p, 0x08)
++#define MT7531_SGMII_TX_CONFIG_MASK GENMASK(15, 0)
++#define MT7531_SGMII_TX_CONFIG BIT(0)
++
++/* Register for SGMII_MODE */
++#define MT7531_SGMII_MODE(p) MT7531_SGMII_REG(p, 0x20)
++#define MT7531_SGMII_REMOTE_FAULT_DIS BIT(8)
++#define MT7531_SGMII_IF_MODE_MASK GENMASK(5, 1)
++#define MT7531_SGMII_FORCE_DUPLEX BIT(4)
++#define MT7531_SGMII_FORCE_SPEED_MASK GENMASK(3, 2)
++#define MT7531_SGMII_FORCE_SPEED_1000 BIT(3)
++#define MT7531_SGMII_FORCE_SPEED_100 BIT(2)
++#define MT7531_SGMII_FORCE_SPEED_10 0
++#define MT7531_SGMII_SPEED_DUPLEX_AN BIT(1)
++
++enum mt7531_sgmii_force_duplex {
++ MT7531_SGMII_FORCE_FULL_DUPLEX = 0,
++ MT7531_SGMII_FORCE_HALF_DUPLEX = 0x10,
++};
++
++/* Fields of QPHY_PWR_STATE_CTRL */
++#define MT7531_QPHY_PWR_STATE_CTRL(p) MT7531_SGMII_REG(p, 0xe8)
++#define MT7531_SGMII_PHYA_PWD BIT(4)
++
++/* Values of SGMII SPEED */
++#define MT7531_PHYA_CTRL_SIGNAL3(p) MT7531_SGMII_REG(p, 0x128)
++#define MT7531_RG_TPHY_SPEED_MASK (BIT(2) | BIT(3))
++#define MT7531_RG_TPHY_SPEED_1_25G 0x0
++#define MT7531_RG_TPHY_SPEED_3_125G BIT(2)
++
+ /* Register for system reset */
+ #define MT7530_SYS_CTRL 0x7000
+ #define SYS_CTRL_PHY_RST BIT(2)
+ #define SYS_CTRL_SW_RST BIT(1)
+ #define SYS_CTRL_REG_RST BIT(0)
+
++/* Register for PHY Indirect Access Control */
++#define MT7531_PHY_IAC 0x701C
++#define MT7531_PHY_ACS_ST BIT(31)
++#define MT7531_MDIO_REG_ADDR_MASK (0x1f << 25)
++#define MT7531_MDIO_PHY_ADDR_MASK (0x1f << 20)
++#define MT7531_MDIO_CMD_MASK (0x3 << 18)
++#define MT7531_MDIO_ST_MASK (0x3 << 16)
++#define MT7531_MDIO_RW_DATA_MASK (0xffff)
++#define MT7531_MDIO_REG_ADDR(x) (((x) & 0x1f) << 25)
++#define MT7531_MDIO_DEV_ADDR(x) (((x) & 0x1f) << 25)
++#define MT7531_MDIO_PHY_ADDR(x) (((x) & 0x1f) << 20)
++#define MT7531_MDIO_CMD(x) (((x) & 0x3) << 18)
++#define MT7531_MDIO_ST(x) (((x) & 0x3) << 16)
++
++enum mt7531_phy_iac_cmd {
++ MT7531_MDIO_ADDR = 0,
++ MT7531_MDIO_WRITE = 1,
++ MT7531_MDIO_READ = 2,
++ MT7531_MDIO_READ_CL45 = 3,
++};
++
++/* MDIO_ST: MDIO start field */
++enum mt7531_mdio_st {
++ MT7531_MDIO_ST_CL45 = 0,
++ MT7531_MDIO_ST_CL22 = 1,
++};
++
++#define MT7531_MDIO_CL22_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \
++ MT7531_MDIO_CMD(MT7531_MDIO_READ))
++#define MT7531_MDIO_CL22_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL22) | \
++ MT7531_MDIO_CMD(MT7531_MDIO_WRITE))
++#define MT7531_MDIO_CL45_ADDR (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \
++ MT7531_MDIO_CMD(MT7531_MDIO_ADDR))
++#define MT7531_MDIO_CL45_READ (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \
++ MT7531_MDIO_CMD(MT7531_MDIO_READ))
++#define MT7531_MDIO_CL45_WRITE (MT7531_MDIO_ST(MT7531_MDIO_ST_CL45) | \
++ MT7531_MDIO_CMD(MT7531_MDIO_WRITE))
++
++/* Register for RGMII clock phase */
++#define MT7531_CLKGEN_CTRL 0x7500
++#define CLK_SKEW_OUT(x) (((x) & 0x3) << 8)
++#define CLK_SKEW_OUT_MASK GENMASK(9, 8)
++#define CLK_SKEW_IN(x) (((x) & 0x3) << 6)
++#define CLK_SKEW_IN_MASK GENMASK(7, 6)
++#define RXCLK_NO_DELAY BIT(5)
++#define TXCLK_NO_REVERSE BIT(4)
++#define GP_MODE(x) (((x) & 0x3) << 1)
++#define GP_MODE_MASK GENMASK(2, 1)
++#define GP_CLK_EN BIT(0)
++
++enum mt7531_gp_mode {
++ MT7531_GP_MODE_RGMII = 0,
++ MT7531_GP_MODE_MII = 1,
++ MT7531_GP_MODE_REV_MII = 2
++};
++
++enum mt7531_clk_skew {
++ MT7531_CLK_SKEW_NO_CHG = 0,
++ MT7531_CLK_SKEW_DLY_100PPS = 1,
++ MT7531_CLK_SKEW_DLY_200PPS = 2,
++ MT7531_CLK_SKEW_REVERSE = 3,
++};
++
+ /* Register for hw trap status */
+ #define MT7530_HWTRAP 0x7800
+ #define HWTRAP_XTAL_MASK (BIT(10) | BIT(9))
+@@ -275,6 +433,16 @@ enum mt7530_vlan_port_attr {
+ #define HWTRAP_XTAL_40MHZ (BIT(10))
+ #define HWTRAP_XTAL_20MHZ (BIT(9))
+
++#define MT7531_HWTRAP 0x7800
++#define HWTRAP_XTAL_FSEL_MASK BIT(7)
++#define HWTRAP_XTAL_FSEL_25MHZ BIT(7)
++#define HWTRAP_XTAL_FSEL_40MHZ 0
++/* Unique fields of (M)HWSTRAP for MT7531 */
++#define XTAL_FSEL_S 7
++#define XTAL_FSEL_M BIT(7)
++#define PHY_EN BIT(6)
++#define CHG_STRAP BIT(8)
++
+ /* Register for hw trap modification */
+ #define MT7530_MHWTRAP 0x7804
+ #define MHWTRAP_PHY0_SEL BIT(20)
+@@ -289,14 +457,37 @@ enum mt7530_vlan_port_attr {
+ #define MT7530_TOP_SIG_CTRL 0x7808
+ #define TOP_SIG_CTRL_NORMAL (BIT(17) | BIT(16))
+
++#define MT7531_TOP_SIG_SR 0x780c
++#define PAD_DUAL_SGMII_EN BIT(1)
++#define PAD_MCM_SMI_EN BIT(0)
++
+ #define MT7530_IO_DRV_CR 0x7810
+ #define P5_IO_CLK_DRV(x) ((x) & 0x3)
+ #define P5_IO_DATA_DRV(x) (((x) & 0x3) << 4)
+
++#define MT7531_CHIP_REV 0x781C
++
++#define MT7531_PLLGP_EN 0x7820
++#define EN_COREPLL BIT(2)
++#define SW_CLKSW BIT(1)
++#define SW_PLLGP BIT(0)
++
+ #define MT7530_P6ECR 0x7830
+ #define P6_INTF_MODE_MASK 0x3
+ #define P6_INTF_MODE(x) ((x) & 0x3)
+
++#define MT7531_PLLGP_CR0 0x78a8
++#define RG_COREPLL_EN BIT(22)
++#define RG_COREPLL_POSDIV_S 23
++#define RG_COREPLL_POSDIV_M 0x3800000
++#define RG_COREPLL_SDM_PCW_S 1
++#define RG_COREPLL_SDM_PCW_M 0x3ffffe
++#define RG_COREPLL_SDM_PCW_CHG BIT(0)
++
++/* Registers for RGMII and SGMII PLL clock */
++#define MT7531_ANA_PLLGP_CR2 0x78b0
++#define MT7531_ANA_PLLGP_CR5 0x78bc
++
+ /* Registers for TRGMII on the both side */
+ #define MT7530_TRGMII_RCK_CTRL 0x7a00
+ #define RX_RST BIT(31)
+@@ -335,10 +526,25 @@ enum mt7530_vlan_port_attr {
+ #define MT7530_P5RGMIITXCR 0x7b04
+ #define CSR_RGMII_TXC_CFG(x) ((x) & 0x1f)
+
++/* Registers for GPIO mode */
++#define MT7531_GPIO_MODE0 0x7c0c
++#define MT7531_GPIO0_MASK GENMASK(3, 0)
++#define MT7531_GPIO0_INTERRUPT 1
++
++#define MT7531_GPIO_MODE1 0x7c10
++#define MT7531_GPIO11_RG_RXD2_MASK GENMASK(15, 12)
++#define MT7531_EXT_P_MDC_11 (2 << 12)
++#define MT7531_GPIO12_RG_RXD3_MASK GENMASK(19, 16)
++#define MT7531_EXT_P_MDIO_12 (2 << 16)
++
+ #define MT7530_CREV 0x7ffc
+ #define CHIP_NAME_SHIFT 16
+ #define MT7530_ID 0x7530
+
++#define MT7531_CREV 0x781C
++#define CHIP_REV_M 0x0f
++#define MT7531_ID 0x7531
++
+ /* Registers for core PLL access through mmd indirect */
+ #define CORE_PLL_GROUP2 0x401
+ #define RG_SYSPLL_EN_NORMAL BIT(15)
+@@ -355,6 +561,10 @@ enum mt7530_vlan_port_attr {
+ #define RG_SYSPLL_DDSFBK_EN BIT(12)
+ #define RG_SYSPLL_BIAS_EN BIT(11)
+ #define RG_SYSPLL_BIAS_LPF_EN BIT(10)
++#define MT7531_PHY_PLL_OFF BIT(5)
++#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
++
++#define MT753X_CTRL_PHY_ADDR 0
+
+ #define CORE_PLL_GROUP5 0x404
+ #define RG_LCDDS_PCW_NCPO1(x) ((x) & 0xffff)
+@@ -433,6 +643,7 @@ enum p5_interface_select {
+ P5_INTF_SEL_PHY_P0,
+ P5_INTF_SEL_PHY_P4,
+ P5_INTF_SEL_GMAC5,
++ P5_INTF_SEL_GMAC5_SGMII,
+ };
+
+ static const char *p5_intf_modes(unsigned int p5_interface)
+@@ -446,6 +657,8 @@ static const char *p5_intf_modes(unsigne
+ return "PHY P4";
+ case P5_INTF_SEL_GMAC5:
+ return "GMAC5";
++ case P5_INTF_SEL_GMAC5_SGMII:
++ return "GMAC5_SGMII";
+ default:
+ return "unknown";
+ }
+@@ -466,6 +679,10 @@ static const char *p5_intf_modes(unsigne
+ * MAC port
+ * @mac_port_config: Holding the way setting up the PHY attribute to a
+ * certain MAC port
++ * @mac_pcs_an_restart Holding the way restarting PCS autonegotiation for a
++ * certain MAC port
++ * @mac_pcs_link_up: Holding the way setting up the PHY attribute to the pcs
++ * of the certain MAC port
+ */
+ struct mt753x_info {
+ enum mt753x_id id;
+@@ -474,6 +691,7 @@ struct mt753x_info {
+ int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
+ int (*phy_write)(struct dsa_switch *ds, int port, int regnum, u16 val);
+ int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface);
++ int (*cpu_port_config)(struct dsa_switch *ds, int port);
+ bool (*phy_mode_supported)(struct dsa_switch *ds, int port,
+ const struct phylink_link_state *state);
+ void (*mac_port_validate)(struct dsa_switch *ds, int port,
+@@ -483,6 +701,10 @@ struct mt753x_info {
+ int (*mac_port_config)(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface);
++ void (*mac_pcs_an_restart)(struct dsa_switch *ds, int port);
++ void (*mac_pcs_link_up)(struct dsa_switch *ds, int port,
++ unsigned int mode, phy_interface_t interface,
++ int speed, int duplex);
+ };
+
+ /* struct mt7530_priv - This is the main data structure for holding the state
diff --git a/target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch b/target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
new file mode 100644
index 0000000000..8c3fe52089
--- /dev/null
+++ b/target/linux/mediatek/patches-5.4/0605-arm64-dts-mt7622-add-mt7531-dsa-to-bananapi-bpi-r64-board.patch
@@ -0,0 +1,71 @@
+From: Landen Chao <landen.chao@mediatek.com>
+Subject: [PATCH net-next 6/6] arm64: dts: mt7622: add mt7531 dsa to
+ bananapi-bpi-r64 board
+Date: Tue, 10 Dec 2019 16:14:42 +0800
+
+Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
+
+Signed-off-by: Landen Chao <landen.chao@mediatek.com>
+---
+ .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 50 +++++++++++++++++++
+ 1 file changed, 50 insertions(+)
+
+--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
++++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+@@ -150,6 +150,56 @@
+ mdio: mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
++
++ switch@0 {
++ compatible = "mediatek,mt7531";
++ reg = <0>;
++ reset-gpios = <&pio 54 0>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ label = "wan";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan0";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan1";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan2";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan3";
++ };
++
++ port@6 {
++ reg = <6>;
++ label = "cpu";
++ ethernet = <&gmac0>;
++ phy-mode = "2500base-x";
++
++ fixed-link {
++ speed = <2500>;
++ full-duplex;
++ pause;
++ };
++ };
++ };
++ };
++
+ };
+ };
+