mpc85xx: Add Aerohive HiveAP-330 Access Point

The following adds the Aerohive HiveAP-330 Access Point to LEDE under
the mpc85xx/p1020 subtarget.

Hardware:
- SoC: Freescale P1020NSE2DFB
- NAND: Intel JS28F512M29EWH 64MB
- Memory: 2x ProMOS V59C1G01168QBJ3 128MB (Total of 256MB)
- 2.4GHz WiFi: Atheros AR9390-AL1A
- 5.0GHz WiFi: Atheros AR9390-AL1A
- Eth1: Atheros AR8035-A PoE
- Eth2: Atheros AR8035-A
- TPM: Atmel AT97SC3204
- LED Driver: TI LP5521

Flashing:
1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a
password of administrator or AhNf?d@ta06 if prompted.
2. Once in U-Boot, tftp boot the initramfs image:
    dhcp;
    tftpboot 0x1000000 192.168.1.101:lede-
mpc85xx-p1020-hiveap-330-initramfs.zImage;
    tftpboot 0x6000000 192.168.1.101:lede-mpc85xx-p1020-hiveap-330.fdt;
    bootm 0x1000000 - 0x6000000;
3. Once booted, scp over the sysupgrade file and sysupgrade the device
to flash LEDE to the NAND.
    sysupgrade /tmp/lede-mpc85xx-p1020-hiveap-330-sysupgrade.img

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>

1 files changed, 7 insertions, 4 deletions

diff --git a/target/linux/mpc85xx/config-4.9 b/target/linux/mpc85xx/config-4.9
index 9086ba9177..46950e70c8 100644
--- a/target/linux/mpc85xx/config-4.9
+++ b/target/linux/mpc85xx/config-4.9
@@ -25,6 +25,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_USE_BUILTIN_BSWAP=y
 CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
 CONFIG_ASN1=y
+CONFIG_AT803X_PHY=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_BLK_MQ_PCI=y
 CONFIG_BOOKE=y
@@ -81,6 +82,7 @@ CONFIG_E500=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_EDAC_ATOMIC_SCRUB=y
 CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_LEGACY=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_EPAPR_BOOT is not set
 CONFIG_ETHERNET_PACKET_MANGLE=y
@@ -161,6 +163,7 @@ CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
+CONFIG_HIVEAP_330=y
 CONFIG_HW_RANDOM=y
 CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
@@ -168,6 +171,7 @@ CONFIG_HZ_250=y
 CONFIG_HZ_PERIODIC=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_IOMMU_HELPER=y
@@ -180,17 +184,16 @@ CONFIG_ISA_DMA_API=y
 CONFIG_KERNEL_GZIP=y
 CONFIG_KERNEL_START=0xc0000000
 # CONFIG_KSI8560 is not set
+CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_LP55XX_COMMON=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_LIBFDT=y
 CONFIG_LOWMEM_CAM_NUM=3
 CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_LXT_PHY=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MFD_MAX77620 is not set
 CONFIG_MIGRATION=y
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MODULES_USE_ELF_RELA=y
@@ -207,8 +210,8 @@ CONFIG_MPIC_TIMER=y
 # CONFIG_MPIC_U3_HT_IRQS is not set
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
 CONFIG_MTD_M25P80=y
+CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_SPI_NOR=y
 # CONFIG_MVME2500 is not set
 # CONFIG_NEED_DMA_MAP_STATE is not set