aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/files-4.19
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-10-09 21:53:35 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-10-30 19:29:59 +0100
commit278512665094888d3c007fdd74e090496d6c811d (patch)
tree6d4f2cdddef316e07829b89c1c1a790d0db92fc3 /target/linux/mvebu/files-4.19
parent3824fa26d256d162fc0e02e46714eda7816cae4a (diff)
downloadupstream-278512665094888d3c007fdd74e090496d6c811d.tar.gz
upstream-278512665094888d3c007fdd74e090496d6c811d.tar.bz2
upstream-278512665094888d3c007fdd74e090496d6c811d.zip
kernel: remove support for kernel 4.19
We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/mvebu/files-4.19')
-rw-r--r--target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts162
1 files changed, 0 insertions, 162 deletions
diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
deleted file mode 100644
index 5649c4cba4..0000000000
--- a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <vladimir.vid@sartura.hr>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
- model = "Methode uDPU Board";
- compatible = "methode,udpu", "marvell,armada3720";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- leds {
- pinctrl-names = "default";
- compatible = "gpio-leds";
-
- power1 {
- label = "udpu:green:power";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
-
- power2 {
- label = "udpu:red:power";
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
-
- network1 {
- label = "udpu:green:network";
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- };
-
- network2 {
- label = "udpu:red:network";
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
-
- alarm1 {
- label = "udpu:green:alarm";
- gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
- };
-
- alarm2 {
- label = "udpu:red:alarm";
- gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c0>;
- los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
- };
-
- sfp_eth1: sfp-eth1 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
- los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
- non-removable;
- no-sd;
- no-sdio;
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <54000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- /* only bootloader is located on the SPI */
- partition@0 {
- label = "uboot";
- reg = <0 0x400000>;
- };
- };
- };
-};
-
-&i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- lm75@48 {
- status = "okay";
- compatible = "lm75";
- reg = <0x48>;
- };
-
- lm75@49 {
- status = "okay";
- compatible = "lm75";
- reg = <0x49>;
- };
-};
-
-&eth0 {
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
- sfp = <&sfp_eth0>;
-};
-
-&eth1 {
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
- sfp = <&sfp_eth1>;
-};
-
-&usb3 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};