diff options
author | Li Zhang <li.zhang@gl-inet.com> | 2020-04-17 14:39:32 +0800 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2020-04-26 21:45:41 +0200 |
commit | 050c24f05c85268431515fb118a0710941473f2c (patch) | |
tree | fc0369a05667b8175308443a2d5a4b8bd0d6c128 /target/linux/mvebu/files-5.4/arch/arm64/boot/dts | |
parent | cf22c4435e3bcf33e407cab71f7ff48aa00b4ac8 (diff) | |
download | upstream-050c24f05c85268431515fb118a0710941473f2c.tar.gz upstream-050c24f05c85268431515fb118a0710941473f2c.tar.bz2 upstream-050c24f05c85268431515fb118a0710941473f2c.zip |
mvebu: add support for GL.iNet GL-MV1000
This patch adds supports for GL-MV1000.
Specification:
- SOC: Marvell Armada 88F3720 (1GHz)
- Flash: 16MB (W25Q128FWSIG)
- RAM: 1GB DDR4
- Ethernet: 3x GE (1 WAN + 2 LAN)
- EMMC: 8GB EMMC (KLM8G1GETF-B041)
- MicroSD: 1x microSD slot
- USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC)
- Button: 1x reset button,1x slide switch
- LED: 3x greed LED
- UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND)
Update firmware instructions
============================
In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web.
Signed-off-by: Li Zhang <li.zhang@gl-inet.com>
[Copied dts file to files-5.4]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Diffstat (limited to 'target/linux/mvebu/files-5.4/arch/arm64/boot/dts')
-rw-r--r-- | target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts new file mode 100644 index 0000000000..9d7963c5b7 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-gl-mv1000.dts @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for GL.iNet GL-MV1000 + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + model = "GL.inet GL-MV1000"; + compatible = "glinet,gl-mv1000", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0xf0000>; + }; + + partition@f0000 { + label = "u-boot-env"; + reg = <0Xf0000 0x8000>; + }; + + factory: partition@f8000 { + label = "factory"; + reg = <0xf8000 0x8000>; + }; + }; + }; +}; + +&sdhci1 { + wp-inverted; + bus-width = <4>; + cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + no-1-8-v; + vqmmc-supply = <&vcc_sd_reg1>; + status = "okay"; +}; + +&sdhci0 { + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + non-removable; + no-sd; + no-sdio; + marvell,pad-type = "fixed-1-8v"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + switch0: switch0@1 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + dsa,member = <0 0>; + + ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <ð0>; + }; + + port@1 { + reg = <1>; + label = "wan"; + phy-handle = <&switch0phy0>; + }; + + port@2 { + reg = <2>; + label = "lan0"; + phy-handle = <&switch0phy1>; + }; + + port@3 { + reg = <3>; + label = "lan1"; + phy-handle = <&switch0phy2>; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch0phy0: switch0phy0@11 { + reg = <0x11>; + }; + switch0phy1: switch0phy1@12 { + reg = <0x12>; + }; + switch0phy2: switch0phy2@13 { + reg = <0x13>; + }; + }; + }; +}; + +ð0 { + mtd-mac-address = <&factory 0x0>; + phy-mode = "rgmii-id"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; |