aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu
diff options
context:
space:
mode:
authorImre Kaloz <kaloz@openwrt.org>2015-03-26 09:42:59 +0000
committerImre Kaloz <kaloz@openwrt.org>2015-03-26 09:42:59 +0000
commitaf69bf56b6810419879f1aecad8160697877a8c6 (patch)
tree3904731ce5bfb9f3c9f44ef4aa3350114ee4a46e /target/linux/mvebu
parent6c0d6a3cb32b0b366b6c28aa7735f00a44226edd (diff)
downloadupstream-af69bf56b6810419879f1aecad8160697877a8c6.tar.gz
upstream-af69bf56b6810419879f1aecad8160697877a8c6.tar.bz2
upstream-af69bf56b6810419879f1aecad8160697877a8c6.zip
drop 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 45002
Diffstat (limited to 'target/linux/mvebu')
-rw-r--r--target/linux/mvebu/config-3.19343
-rw-r--r--target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch10
-rw-r--r--target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch97
-rw-r--r--target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch70
-rw-r--r--target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch220
-rw-r--r--target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch39
-rw-r--r--target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch43
-rw-r--r--target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch98
-rw-r--r--target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch51
-rw-r--r--target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch297
-rw-r--r--target/linux/mvebu/patches-3.19/100-find_active_root.patch153
-rw-r--r--target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch15
-rw-r--r--target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch223
-rw-r--r--target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch63
-rw-r--r--target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch433
-rw-r--r--target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch52
-rw-r--r--target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch149
-rw-r--r--target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch18
-rw-r--r--target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch28
-rw-r--r--target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch19
-rw-r--r--target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch39
21 files changed, 0 insertions, 2460 deletions
diff --git a/target/linux/mvebu/config-3.19 b/target/linux/mvebu/config-3.19
deleted file mode 100644
index fe02c4d486..0000000000
--- a/target/linux/mvebu/config-3.19
+++ /dev/null
@@ -1,343 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_XZ=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART=y
-# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-# CONFIG_DW_DMAC_CORE is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_MVEBU_PWM=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UIMAGE_SPLIT=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVSW61XX_PHY=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_PWM=y
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_STATS=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_XZ=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch
deleted file mode 100644
index 1569c709b8..0000000000
--- a/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -541,6 +541,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-db.dtb \
- armada-xp-gp.dtb \
- armada-xp-lenovo-ix4-300d.dtb \
-+ armada-xp-mamba.dtb \
- armada-xp-matrix.dtb \
- armada-xp-netgear-rn2120.dtb \
- armada-xp-openblocks-ax3-4.dtb \
diff --git a/target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch b/target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch
deleted file mode 100644
index bf2006927e..0000000000
--- a/target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 11aa9df4de06cc257327d783c5cb615989e87286 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 23 Jan 2015 15:18:27 +0100
-Subject: [PATCH v2 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining
-
-The NDDB register holds the data that are needed by the read and write
-commands.
-
-However, during a read PIO access, the datasheet specifies that after each 32
-bits read in that register, when BCH is enabled, we have to make sure that the
-RDDREQ bit is set in the NDSR register.
-
-This fixes an issue that was seen on the Armada 385, and presumably other mvebu
-SoCs, when a read on a newly erased page would end up in the driver reporting a
-timeout from the NAND.
-
-Cc: <stable@vger.kernel.org> # v3.14
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/mtd/nand/pxa3xx_nand.c | 45 ++++++++++++++++++++++++++++++++++++------
- 1 file changed, 39 insertions(+), 6 deletions(-)
-
-diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
-index 96b0b1d27df1..e6918befb951 100644
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -23,6 +23,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/io.h>
- #include <linux/irq.h>
-+#include <linux/jiffies.h>
- #include <linux/slab.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -480,6 +481,38 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
- nand_writel(info, NDCR, ndcr | int_mask);
- }
-
-+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
-+{
-+ u32 *dst = (u32 *)data;
-+
-+ if (info->ecc_bch) {
-+ while (len--) {
-+ u32 timeout;
-+
-+ *dst++ = nand_readl(info, NDDB);
-+
-+ /*
-+ * According to the datasheet, when reading
-+ * from NDDB with BCH enabled, after each 32
-+ * bits reads, we have to make sure that the
-+ * NDSR.RDDREQ bit is set
-+ */
-+ timeout = jiffies + msecs_to_jiffies(5);
-+ while (!(nand_readl(info, NDSR) & NDSR_RDDREQ)) {
-+ if (!time_before(jiffies, timeout)) {
-+ dev_err(&info->pdev->dev,
-+ "Timeout on RDDREQ while draining the FIFO\n");
-+ return;
-+ }
-+
-+ cpu_relax();
-+ }
-+ }
-+ } else {
-+ __raw_readsl(info->mmio_base + NDDB, data, len);
-+ }
-+}
-+
- static void handle_data_pio(struct pxa3xx_nand_info *info)
- {
- unsigned int do_bytes = min(info->data_size, info->chunk_size);
-@@ -496,14 +529,14 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
- DIV_ROUND_UP(info->oob_size, 4));
- break;
- case STATE_PIO_READING:
-- __raw_readsl(info->mmio_base + NDDB,
-- info->data_buff + info->data_buff_pos,
-- DIV_ROUND_UP(do_bytes, 4));
-+ drain_fifo(info,
-+ info->data_buff + info->data_buff_pos,
-+ DIV_ROUND_UP(do_bytes, 4));
-
- if (info->oob_size > 0)
-- __raw_readsl(info->mmio_base + NDDB,
-- info->oob_buff + info->oob_buff_pos,
-- DIV_ROUND_UP(info->oob_size, 4));
-+ drain_fifo(info,
-+ info->oob_buff + info->oob_buff_pos,
-+ DIV_ROUND_UP(info->oob_size, 4));
- break;
- default:
- dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
---
-2.2.2
-
diff --git a/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch b/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch
deleted file mode 100644
index 7e27ae2b41..0000000000
--- a/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 91b4c91f919abffa72cbf7545a944252f8e4f775 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 8 Jan 2015 18:38:08 +0100
-Subject: [PATCH 3/4] ARM: mvebu: Add a number of pinctrl functions
-
-Some pinctrl functions can be shared with all DTS out there, since they are
-generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid
-duplication.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
-diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
-index 40200084c6c8..98885c58be29 100644
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -195,6 +195,45 @@
-
- pinctrl@18000 {
- reg = <0x18000 0x20>;
-+
-+ ge0_rgmii_pins: ge-rgmii-pins-0 {
-+ marvell,pins = "mpp6", "mpp7", "mpp8",
-+ "mpp9", "mpp10", "mpp11",
-+ "mpp12", "mpp13", "mpp14",
-+ "mpp15", "mpp16", "mpp17";
-+ marvell,function = "ge0";
-+ };
-+
-+ i2c0_pins: i2c-pins-0 {
-+ marvell,pins = "mpp2", "mpp3";
-+ marvell,function = "i2c0";
-+ };
-+
-+ mdio_pins: mdio-pins {
-+ marvell,pins = "mpp4", "mpp5";
-+ marvell,function = "ge";
-+ };
-+
-+ ref_clk0_pins: ref-clk-pins-0 {
-+ marvell,pins = "mpp45";
-+ marvell,function = "ref";
-+ };
-+
-+ spi1_pins: spi-pins-1 {
-+ marvell,pins = "mpp56", "mpp57", "mpp58",
-+ "mpp59";
-+ marvell,function = "spi1";
-+ };
-+
-+ uart0_pins: uart-pins-0 {
-+ marvell,pins = "mpp0", "mpp1";
-+ marvell,function = "ua0";
-+ };
-+
-+ uart1_pins: uart-pins-1 {
-+ marvell,pins = "mpp19", "mpp20";
-+ marvell,function = "ua1";
-+ };
- };
-
- gpio0: gpio@18100 {
---
-2.2.1
-
diff --git a/target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch b/target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch
deleted file mode 100644
index a40c957fb3..0000000000
--- a/target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch
+++ /dev/null
@@ -1,220 +0,0 @@
-From e5ee12817e9eac891c6b2a340f64d94d9abd355f Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 8 Jan 2015 18:38:09 +0100
-Subject: [PATCH 4/4] ARM: mvebu: Add Armada 385 Access Point Development Board
- support
-
-The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB
-SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage.
-
-[gregory.clement@free-electrons.com: switch the license to the dual
-X11/GPL with the agreement of the author]
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/armada-385-db-ap.dts | 178 +++++++++++++++++++++++++++++++++
- 2 files changed, 179 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts
-
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 6dc9c17f9ff5..d34837104949 100644
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -536,6 +536,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
- armada-375-db.dtb
- dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb \
-+ armada-385-db-ap.dtb \
- armada-385-rd.dtb
- dtb-$(CONFIG_MACH_ARMADA_XP) += \
- armada-xp-axpwifiap.dtb \
-diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
-new file mode 100644
-index 000000000000..57b9119fb3e0
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -0,0 +1,178 @@
-+/*
-+ * Device Tree file for Marvell Armada 385 Access Point Development board
-+ * (DB-88F6820-AP)
-+ *
-+ * Copyright (C) 2014 Marvell
-+ *
-+ * Nadav Haklai <nadavh@marvell.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without
-+ * any warranty of any kind, whether express or implied.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "armada-385.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ model = "Marvell Armada 385 Access Point Development Board";
-+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ stdout-path = &uart1;
-+ };
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x80000000>; /* 2GB */
-+ };
-+
-+ soc {
-+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-+
-+ internal-regs {
-+ spi1: spi@10680 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi1_pins>;
-+ status = "okay";
-+
-+ spi-flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "st,m25p128";
-+ reg = <0>; /* Chip select 0 */
-+ spi-max-frequency = <54000000>;
-+ };
-+ };
-+
-+ i2c0: i2c@11000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins>;
-+ status = "okay";
-+
-+ /*
-+ * This bus is wired to two EEPROM
-+ * sockets, one of which holding the
-+ * board ID used by the bootloader.
-+ * Erasing this EEPROM's content will
-+ * brick the board.
-+ * Use this bus with caution.
-+ */
-+ };
-+
-+ mdio@72004 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mdio_pins>;
-+
-+ phy0: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+
-+ phy1: ethernet-phy@4 {
-+ reg = <4>;
-+ };
-+
-+ phy2: ethernet-phy@6 {
-+ reg = <6>;
-+ };
-+ };
-+
-+ /* UART0 is exposed through the JP8 connector */
-+ uart0: serial@12000 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins>;
-+ status = "okay";
-+ };
-+
-+ /*
-+ * UART1 is exposed through a FTDI chip
-+ * wired to the mini-USB connector
-+ */
-+ uart1: serial@12100 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "okay";
-+ };
-+
-+ ethernet@30000 {
-+ status = "okay";
-+ phy = <&phy2>;
-+ phy-mode = "sgmii";
-+ };
-+
-+ ethernet@34000 {
-+ status = "okay";
-+ phy = <&phy1>;
-+ phy-mode = "sgmii";
-+ };
-+
-+ ethernet@70000 {
-+ pinctrl-names = "default";
-+
-+ /*
-+ * The Reference Clock 0 is used to
-+ * provide a clock to the PHY
-+ */
-+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
-+ status = "okay";
-+ phy = <&phy0>;
-+ phy-mode = "rgmii-id";
-+ };
-+ };
-+
-+ pcie-controller {
-+ status = "okay";
-+
-+ /*
-+ * The three PCIe units are accessible through
-+ * standard mini-PCIe slots on the board.
-+ */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ pcie@2,0 {
-+ /* Port 1, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ pcie@3,0 {
-+ /* Port 2, Lane 0 */
-+ status = "okay";
-+ };
-+ };
-+ };
-+};
---
-2.2.1
-
diff --git a/target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch b/target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch
deleted file mode 100644
index 85a9511547..0000000000
--- a/target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 7eb1f09ec8e25aa2fc3f6fc5fc9405d9f917d503 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 11 Dec 2014 14:14:58 +0100
-Subject: [PATCH 1/2] ARM: mvebu: A385-AP: Enable the NAND controller
-
-The A385 AP has a 1GB NAND chip. Enable it.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
-diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
-index 3a51531eb37b..02db04867d8f 100644
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -122,6 +122,19 @@
- phy = <&phy0>;
- phy-mode = "rgmii-id";
- };
-+
-+ nfc: flash@d0000 {
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ num-cs = <1>;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+ marvell,nand-keep-config;
-+ marvell,nand-enable-arbiter;
-+ nand-on-flash-bbt;
-+ };
- };
-
- pcie-controller {
---
-2.2.1
-
diff --git a/target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch b/target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch
deleted file mode 100644
index cd85d9d155..0000000000
--- a/target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From a95308d88c07e0093aedae7e64f92cb1e165f592 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Fri, 5 Dec 2014 15:44:57 +0100
-Subject: [PATCH] pinctrl: mvebu: a38x: Add UART1 muxing options
-
-The MPP19 and MMP20 pins also have the ability to be muxed to the uart1
-function.
-
-Add this case to the pinctrl driver.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Jason Cooper <jason@lakedaemon.net>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
-index 224c6cff6aa2..7302f66f4f19 100644
---- a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
-+++ b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c
-@@ -145,14 +145,16 @@ static struct mvebu_mpp_mode armada_38x_mpp_modes[] = {
- MPP_VAR_FUNCTION(2, "ptp", "event_req", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(3, "pcie0", "clkreq", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(4, "sata1", "prsnt", V_88F6810_PLUS),
-- MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS)),
-+ MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS),
-+ MPP_VAR_FUNCTION(6, "ua1", "rxd", V_88F6810_PLUS)),
- MPP_MODE(20,
- MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS),
- MPP_VAR_FUNCTION(1, "ge0", "txclk", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(2, "ptp", "clk", V_88F6810_PLUS),
- MPP_VAR_FUNCTION(3, "pcie1", "rstout", V_88F6820_PLUS),
- MPP_VAR_FUNCTION(4, "sata0", "prsnt", V_88F6810_PLUS),
-- MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS)),
-+ MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS),
-+ MPP_VAR_FUNCTION(6, "ua1", "txd", V_88F6810_PLUS)),
- MPP_MODE(21,
- MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS),
- MPP_VAR_FUNCTION(1, "spi0", "cs1", V_88F6810_PLUS),
---
-2.2.1
-
diff --git a/target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch b/target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch
deleted file mode 100644
index 7b506e75a8..0000000000
--- a/target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From 4a25432b13090b57d257fa0ffb6712d8acf94523 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Thu, 8 Jan 2015 18:38:05 +0100
-Subject: [PATCH 1/4] ARM: mvebu: a38x: Fix node names
-
-Some nodes in the DTs have a reg property but no unit name in their node name.
-
-This contradicts the way the ePAPR defines the node names. Fix this.
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-380.dtsi | 2 +-
- arch/arm/boot/dts/armada-385-db.dts | 2 +-
- arch/arm/boot/dts/armada-385-rd.dts | 2 +-
- arch/arm/boot/dts/armada-385.dtsi | 2 +-
- arch/arm/boot/dts/armada-38x.dtsi | 4 ++--
- 5 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
-index 4173a8ab34e7..13400ce88c54 100644
---- a/arch/arm/boot/dts/armada-380.dtsi
-+++ b/arch/arm/boot/dts/armada-380.dtsi
-@@ -32,7 +32,7 @@
-
- soc {
- internal-regs {
-- pinctrl {
-+ pinctrl@18000 {
- compatible = "marvell,mv88f6810-pinctrl";
- reg = <0x18000 0x20>;
- };
-diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts
-index 2aaa9d2ac284..212605ccc7b6 100644
---- a/arch/arm/boot/dts/armada-385-db.dts
-+++ b/arch/arm/boot/dts/armada-385-db.dts
-@@ -74,7 +74,7 @@
- phy-mode = "rgmii-id";
- };
-
-- mdio {
-+ mdio@72004 {
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts
-index aaca2861dc87..74a3bfe6efd7 100644
---- a/arch/arm/boot/dts/armada-385-rd.dts
-+++ b/arch/arm/boot/dts/armada-385-rd.dts
-@@ -67,7 +67,7 @@
- };
-
-
-- mdio {
-+ mdio@72004 {
- phy0: ethernet-phy@0 {
- reg = <0>;
- };
-diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
-index 6283d7912f71..5249a4d3c207 100644
---- a/arch/arm/boot/dts/armada-385.dtsi
-+++ b/arch/arm/boot/dts/armada-385.dtsi
-@@ -37,7 +37,7 @@
-
- soc {
- internal-regs {
-- pinctrl {
-+ pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
- };
-diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
-index 74391dace9e7..ada1f206028b 100644
---- a/arch/arm/boot/dts/armada-38x.dtsi
-+++ b/arch/arm/boot/dts/armada-38x.dtsi
-@@ -193,7 +193,7 @@
- status = "disabled";
- };
-
-- pinctrl {
-+ pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- reg = <0x18000 0x20>;
- };
-@@ -373,7 +373,7 @@
- status = "disabled";
- };
-
-- mdio {
-+ mdio@72004 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,orion-mdio";
---
-2.2.1
-
diff --git a/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch b/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch
deleted file mode 100644
index e55eca3e04..0000000000
--- a/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-Document the binding for the TLC59116 LED driver.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt
-@@ -0,0 +1,40 @@
-+LEDs connected to tcl59116
-+
-+Required properties
-+- compatible: should be "ti,tlc59116"
-+- #address-cells: must be 1
-+- #size-cells: must be 0
-+- reg: typically 0x68
-+
-+Each led is represented as a sub-node of the ti,,tlc59116.
-+See Documentation/devicetree/bindings/leds/common.txt
-+
-+LED sub-node properties:
-+- reg: number of LED line, 0 to 15
-+- label: (optional) name of LED
-+- linux,default-trigger : (optional)
-+
-+Examples:
-+
-+tlc59116@68 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "ti,tlc59116";
-+ reg = <0x68>;
-+
-+ wan@0 {
-+ label = "wrt1900ac:amber:wan";
-+ reg = <0x0>;
-+ };
-+
-+ 2g@2 {
-+ label = "wrt1900ac:white:2g";
-+ reg = <0x2>;
-+ };
-+
-+ alive@9 {
-+ label = "wrt1900ac:green:alive";
-+ reg = <0x9>;
-+ linux,default_trigger = "heartbeat";
-+ };
-+};
diff --git a/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch b/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch
deleted file mode 100644
index 6aa57a34fc..0000000000
--- a/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED
-output has its own 8-bit fixed-frequency PWM controller to control the
-brightness of the LED.
-
-This is based on a driver from Belkin, but has been extensively
-rewritten.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/leds/Kconfig | 8 ++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 261 insertions(+)
- create mode 100644 drivers/leds/leds-tlc59116.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -457,6 +457,14 @@ config LEDS_TCA6507
- LED driver chips accessed via the I2C bus.
- Driver support brightness control and hardware-assisted blinking.
-
-+config LEDS_TLC59116
-+ tristate "LED driver for TLC59116F controllers"
-+ depends on LEDS_CLASS && I2C
-+ select REGMAP_I2C
-+ help
-+ This option enables support for Texas Instruments TLC59116F
-+ LED controller.
-+
- config LEDS_MAX8997
- tristate "LED support for MAX8997 PMIC"
- depends on LEDS_CLASS && MFD_MAX8997
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp850
- obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
- obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
- obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
-+obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o
- obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
---- /dev/null
-+++ b/drivers/leds/leds-tlc59116.c
-@@ -0,0 +1,252 @@
-+/*
-+ * Copyright 2014 Belkin Inc.
-+ * Copyright 2014 Andrew Lunn <andrew@lunn.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License.
-+ */
-+
-+#include <linux/i2c.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#define TLC59116_LEDS 16
-+
-+#define TLC59116_REG_MODE1 0x00
-+#define MODE1_RESPON_ADDR_MASK 0xF0
-+#define MODE1_NORMAL_MODE (0 << 4)
-+#define MODE1_SPEED_MODE (1 << 4)
-+
-+#define TLC59116_REG_MODE2 0x01
-+#define MODE2_DIM (0 << 5)
-+#define MODE2_BLINK (1 << 5)
-+#define MODE2_OCH_STOP (0 << 3)
-+#define MODE2_OCH_ACK (1 << 3)
-+
-+#define TLC59116_REG_PWM(x) (0x02 + (x))
-+
-+#define TLC59116_REG_GRPPWM 0x12
-+#define TLC59116_REG_GRPFREQ 0x13
-+
-+/* LED Driver Output State, determine the source that drives LED outputs */
-+#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2))
-+#define TLC59116_LED_OFF 0x0 /* Output LOW */
-+#define TLC59116_LED_ON 0x1 /* Output HI-Z */
-+#define TLC59116_DIM 0x2 /* Dimming */
-+#define TLC59116_BLINK 0x3 /* Blinking */
-+#define LED_MASK 0x3
-+
-+#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev)
-+#define work_to_led(work) container_of(work, struct tlc59116_led, work)
-+
-+struct tlc59116_led {
-+ bool active;
-+ struct regmap *regmap;
-+ unsigned int led_no;
-+ struct led_classdev ldev;
-+ struct work_struct work;
-+};
-+
-+struct tlc59116_priv {
-+ struct tlc59116_led leds[TLC59116_LEDS];
-+};
-+
-+static int
-+tlc59116_set_mode(struct regmap *regmap, u8 mode)
-+{
-+ int err;
-+ u8 val;
-+
-+ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
-+ mode = MODE2_DIM;
-+
-+ /* Configure MODE1 register */
-+ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE);
-+ if (err)
-+ return err;
-+
-+ /* Configure MODE2 Reg */
-+ val = MODE2_OCH_STOP | mode;
-+
-+ return regmap_write(regmap, TLC59116_REG_MODE2, val);
-+}
-+
-+static int
-+tlc59116_set_led(struct tlc59116_led *led, u8 val)
-+{
-+ struct regmap *regmap = led->regmap;
-+ unsigned int i = (led->led_no % 4) * 2;
-+ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no);
-+ unsigned int mask = LED_MASK << i;
-+
-+ val = val << i;
-+
-+ return regmap_update_bits(regmap, addr, mask, val);
-+}
-+
-+static void
-+tlc59116_led_work(struct work_struct *work)
-+{
-+ struct tlc59116_led *led = work_to_led(work);
-+ struct regmap *regmap = led->regmap;
-+ int err;
-+ u8 pwm;
-+
-+ pwm = TLC59116_REG_PWM(led->led_no);
-+ err = regmap_write(regmap, pwm, led->ldev.brightness);
-+ if (err)
-+ dev_err(led->ldev.dev, "Failed setting brightness\n");
-+}
-+
-+static void
-+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
-+{
-+ struct tlc59116_led *led = ldev_to_led(led_cdev);
-+
-+ led->ldev.brightness = value;
-+ schedule_work(&led->work);
-+}
-+
-+static void
-+tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i)
-+{
-+ while (--i >= 0) {
-+ if (priv->leds[i].active) {
-+ led_classdev_unregister(&priv->leds[i].ldev);
-+ cancel_work_sync(&priv->leds[i].work);
-+ }
-+ }
-+}
-+
-+static int
-+tlc59116_configure(struct device *dev,
-+ struct tlc59116_priv *priv,
-+ struct regmap *regmap)
-+{
-+ unsigned int i;
-+ int err = 0;
-+
-+ tlc59116_set_mode(regmap, MODE2_DIM);
-+ for (i = 0; i < TLC59116_LEDS; i++) {
-+ struct tlc59116_led *led = &priv->leds[i];
-+
-+ if (!led->active)
-+ continue;
-+
-+ led->regmap = regmap;
-+ led->led_no = i;
-+ led->ldev.brightness_set = tlc59116_led_set;
-+ led->ldev.max_brightness = LED_FULL;
-+ INIT_WORK(&led->work, tlc59116_led_work);
-+ err = led_classdev_register(dev, &led->ldev);
-+ if (err < 0) {
-+ dev_err(dev, "couldn't register LED %s\n",
-+ led->ldev.name);
-+ goto exit;
-+ }
-+ tlc59116_set_led(led, TLC59116_DIM);
-+ }
-+
-+ return 0;
-+
-+exit:
-+ tlc59116_destroy_devices(priv, i);
-+ return err;
-+}
-+
-+static const struct regmap_config tlc59116_regmap = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+ .max_register = 0x1e,
-+};
-+
-+static int
-+tlc59116_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct tlc59116_priv *priv = i2c_get_clientdata(client);
-+ struct device *dev = &client->dev;
-+ struct device_node *np = client->dev.of_node, *child;
-+ struct regmap *regmap;
-+ int err, count, reg;
-+
-+ count = of_get_child_count(np);
-+ if (!count || count > TLC59116_LEDS)
-+ return -EINVAL;
-+
-+ if (!i2c_check_functionality(client->adapter,
-+ I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -EIO;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap);
-+ if (IS_ERR(regmap)) {
-+ err = PTR_ERR(regmap);
-+ dev_err(dev, "Failed to allocate register map: %d\n", err);
-+ return err;
-+ }
-+
-+ i2c_set_clientdata(client, priv);
-+
-+ for_each_child_of_node(np, child) {
-+ err = of_property_read_u32(child, "reg", &reg);
-+ if (err)
-+ return err;
-+ if (reg < 0 || reg >= TLC59116_LEDS)
-+ return -EINVAL;
-+ if (priv->leds[reg].active)
-+ return -EINVAL;
-+ priv->leds[reg].active = true;
-+ priv->leds[reg].ldev.name =
-+ of_get_property(child, "label", NULL) ? : child->name;
-+ priv->leds[reg].ldev.default_trigger =
-+ of_get_property(child, "linux,default-trigger", NULL);
-+ }
-+ return tlc59116_configure(dev, priv, regmap);
-+}
-+
-+static int
-+tlc59116_remove(struct i2c_client *client)
-+{
-+ struct tlc59116_priv *priv = i2c_get_clientdata(client);
-+
-+ tlc59116_destroy_devices(priv, TLC59116_LEDS);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id of_tlc59116_leds_match[] = {
-+ { .compatible = "ti,tlc59116", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match);
-+
-+static const struct i2c_device_id tlc59116_id[] = {
-+ { "tlc59116" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(i2c, tlc59116_id);
-+
-+static struct i2c_driver tlc59116_driver = {
-+ .driver = {
-+ .name = "tlc59116",
-+ .of_match_table = of_match_ptr(of_tlc59116_leds_match),
-+ },
-+ .probe = tlc59116_probe,
-+ .remove = tlc59116_remove,
-+ .id_table = tlc59116_id,
-+};
-+
-+module_i2c_driver(tlc59116_driver);
-+
-+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
-+MODULE_LICENSE("GPL");
-+MODULE_DESCRIPTION("TLC59116 LED driver");
diff --git a/target/linux/mvebu/patches-3.19/100-find_active_root.patch b/target/linux/mvebu/patches-3.19/100-find_active_root.patch
deleted file mode 100644
index 68826fc4e1..0000000000
--- a/target/linux/mvebu/patches-3.19/100-find_active_root.patch
+++ /dev/null
@@ -1,153 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-The bootloader passes the active rootfs in bootargs and also sets the
-rootfstype to jffs2 - which is clearly something we don't want.
-
-Rename both root= and rootfstype= variables to avoid issues and also
-use the former to dynamically rename the active partition to "ubi".
-
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -66,6 +66,18 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+static void mangle_bootargs(void *fdt, const char *fdt_cmdline)
-+{
-+ char *rootdev;
-+ char *rootfs;
-+
-+ rootdev = strstr(fdt_cmdline, "root=/dev/mtdblock");
-+ strncpy(rootdev, "uboot_active_root=", 18);
-+
-+ rootfs = strstr(fdt_cmdline, "rootfstype");
-+ strncpy(rootfs, "origfstype", 10);
-+}
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -135,6 +147,9 @@ int atags_to_fdt(void *atag_list, void *
-
- for_each_tag(atag, atag_list) {
- if (atag->hdr.tag == ATAG_CMDLINE) {
-+ /* Rename the original root= and rootfstype= options */
-+ mangle_bootargs(fdt,
-+ atag->u.cmdline.cmdline);
- /* Append the ATAGS command line to the device tree
- * command line.
- * NB: This means that if the same parameter is set in
---- a/arch/arm/boot/compressed/string.c
-+++ b/arch/arm/boot/compressed/string.c
-@@ -111,6 +111,53 @@ char *strchr(const char *s, int c)
- return (char *)s;
- }
-
-+/**
-+ * strncpy - Copy a length-limited, %NUL-terminated string
-+ * @dest: Where to copy the string to
-+ * @src: Where to copy the string from
-+ * @count: The maximum number of bytes to copy
-+ *
-+ * The result is not %NUL-terminated if the source exceeds
-+ * @count bytes.
-+ *
-+ * In the case where the length of @src is less than that of
-+ * count, the remainder of @dest will be padded with %NUL.
-+ *
-+ */
-+char *strncpy(char *dest, const char *src, size_t count)
-+{
-+ char *tmp = dest;
-+
-+ while (count) {
-+ if ((*tmp = *src) != 0)
-+ src++;
-+ tmp++;
-+ count--;
-+ }
-+ return dest;
-+}
-+
-+/**
-+ * strstr - Find the first substring in a %NUL terminated string
-+ * @s1: The string to be searched
-+ * @s2: The string to search for
-+ */
-+char *strstr(const char *s1, const char *s2)
-+{
-+ size_t l1, l2;
-+
-+ l2 = strlen(s2);
-+ if (!l2)
-+ return (char *)s1;
-+ l1 = strlen(s1);
-+ while (l1 >= l2) {
-+ l1--;
-+ if (!memcmp(s1, s2, l2))
-+ return (char *)s1;
-+ s1++;
-+ }
-+ return NULL;
-+}
- #undef memset
-
- void *memset(void *s, int c, size_t count)
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int uboot_active_root;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
- {
- struct device_node *node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i;
-
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- (*pparts)[i].offset = of_read_number(reg, a_cells);
- (*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (uboot_active_root && (i == uboot_active_root)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
-+
- (*pparts)[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &uboot_active_root);
-+
-+ if (!uboot_active_root)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("uboot_active_root=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch
deleted file mode 100644
index 02e913e30b..0000000000
--- a/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -54,12 +54,10 @@
- };
-
- i2c0: i2c@11000 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- i2c1: i2c@11100 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
diff --git a/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch b/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch
deleted file mode 100644
index 844df4f6f5..0000000000
--- a/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch
+++ /dev/null
@@ -1,223 +0,0 @@
-Wrap some long lines.
-Prefer seq_puts() over seq_printf().
-space to tab conversions.
-Spelling error fix.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/gpio-mvebu.c | 77 ++++++++++++++++++++++++++---------------------
- 1 file changed, 42 insertions(+), 35 deletions(-)
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -59,7 +59,7 @@
- #define GPIO_LEVEL_MASK_OFF 0x001c
-
- /* The MV78200 has per-CPU registers for edge mask and level mask */
--#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
-+#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
- #define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C)
-
- /* The Armada XP has per-CPU registers for interrupt cause, interrupt
-@@ -69,11 +69,11 @@
- #define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4)
- #define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4)
-
--#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1
--#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2
-+#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1
-+#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2
- #define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3
-
--#define MVEBU_MAX_GPIO_PER_BANK 32
-+#define MVEBU_MAX_GPIO_PER_BANK 32
-
- struct mvebu_gpio_chip {
- struct gpio_chip chip;
-@@ -82,9 +82,9 @@ struct mvebu_gpio_chip {
- void __iomem *percpu_membase;
- int irqbase;
- struct irq_domain *domain;
-- int soc_variant;
-+ int soc_variant;
-
-- /* Used to preserve GPIO registers accross suspend/resume */
-+ /* Used to preserve GPIO registers across suspend/resume */
- u32 out_reg;
- u32 io_conf_reg;
- u32 blink_en_reg;
-@@ -107,7 +107,8 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_BLINK_EN_OFF;
- }
-
--static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip)
- {
- return mvchip->membase + GPIO_IO_CONF_OFF;
- }
-@@ -117,12 +118,14 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_IN_POL_OFF;
- }
-
--static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip)
- {
- return mvchip->membase + GPIO_DATA_IN_OFF;
- }
-
--static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip)
- {
- int cpu;
-
-@@ -132,13 +135,15 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_EDGE_CAUSE_OFF;
- case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
- cpu = smp_processor_id();
-- return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu);
-+ return mvchip->percpu_membase +
-+ GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu);
- default:
- BUG();
- }
- }
-
--static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip)
-+static inline void __iomem *
-+mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip)
- {
- int cpu;
-
-@@ -150,7 +155,8 @@ static inline void __iomem *mvebu_gpiore
- return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu);
- case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
- cpu = smp_processor_id();
-- return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu);
-+ return mvchip->percpu_membase +
-+ GPIO_EDGE_MASK_ARMADAXP_OFF(cpu);
- default:
- BUG();
- }
-@@ -168,7 +174,8 @@ static void __iomem *mvebu_gpioreg_level
- return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu);
- case MVEBU_GPIO_SOC_VARIANT_ARMADAXP:
- cpu = smp_processor_id();
-- return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu);
-+ return mvchip->percpu_membase +
-+ GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu);
- default:
- BUG();
- }
-@@ -364,22 +371,22 @@ static void mvebu_gpio_level_irq_unmask(
- * value of the line or the opposite value.
- *
- * Level IRQ handlers: DATA_IN is used directly as cause register.
-- * Interrupt are masked by LEVEL_MASK registers.
-+ * Interrupt are masked by LEVEL_MASK registers.
- * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE.
-- * Interrupt are masked by EDGE_MASK registers.
-+ * Interrupt are masked by EDGE_MASK registers.
- * Both-edge handlers: Similar to regular Edge handlers, but also swaps
-- * the polarity to catch the next line transaction.
-- * This is a race condition that might not perfectly
-- * work on some use cases.
-+ * the polarity to catch the next line transaction.
-+ * This is a race condition that might not perfectly
-+ * work on some use cases.
- *
- * Every eight GPIO lines are grouped (OR'ed) before going up to main
- * cause register.
- *
-- * EDGE cause mask
-- * data-in /--------| |-----| |----\
-- * -----| |----- ---- to main cause reg
-- * X \----------------| |----/
-- * polarity LEVEL mask
-+ * EDGE cause mask
-+ * data-in /--------| |-----| |----\
-+ * -----| |----- ---- to main cause reg
-+ * X \----------------| |----/
-+ * polarity LEVEL mask
- *
- ****************************************************************************/
-
-@@ -394,9 +401,8 @@ static int mvebu_gpio_irq_set_type(struc
- pin = d->hwirq;
-
- u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin);
-- if (!u) {
-+ if (!u)
- return -EINVAL;
-- }
-
- type &= IRQ_TYPE_SENSE_MASK;
- if (type == IRQ_TYPE_NONE)
-@@ -529,13 +535,13 @@ static void mvebu_gpio_dbg_show(struct s
- (data_in ^ in_pol) & msk ? "hi" : "lo",
- in_pol & msk ? "lo" : "hi");
- if (!((edg_msk | lvl_msk) & msk)) {
-- seq_printf(s, " disabled\n");
-+ seq_puts(s, " disabled\n");
- continue;
- }
- if (edg_msk & msk)
-- seq_printf(s, " edge ");
-+ seq_puts(s, " edge ");
- if (lvl_msk & msk)
-- seq_printf(s, " level");
-+ seq_puts(s, " level");
- seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear ");
- }
- }
-@@ -546,15 +552,15 @@ static void mvebu_gpio_dbg_show(struct s
- static const struct of_device_id mvebu_gpio_of_match[] = {
- {
- .compatible = "marvell,orion-gpio",
-- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
-+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION,
- },
- {
- .compatible = "marvell,mv78200-gpio",
-- .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200,
-+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200,
- },
- {
- .compatible = "marvell,armadaxp-gpio",
-- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
-+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP,
- },
- {
- /* sentinel */
-@@ -668,7 +674,8 @@ static int mvebu_gpio_probe(struct platf
- else
- soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION;
-
-- mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL);
-+ mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip),
-+ GFP_KERNEL);
- if (!mvchip)
- return -ENOMEM;
-
-@@ -767,8 +774,8 @@ static int mvebu_gpio_probe(struct platf
- * interrupt handlers, with each handler dealing with 8 GPIO
- * pins. */
- for (i = 0; i < 4; i++) {
-- int irq;
-- irq = platform_get_irq(pdev, i);
-+ int irq = platform_get_irq(pdev, i);
-+
- if (irq < 0)
- continue;
- irq_set_handler_data(irq, mvchip);
-@@ -827,7 +834,7 @@ static int mvebu_gpio_probe(struct platf
-
- static struct platform_driver mvebu_gpio_driver = {
- .driver = {
-- .name = "mvebu-gpio",
-+ .name = "mvebu-gpio",
- .of_match_table = mvebu_gpio_of_match,
- },
- .probe = mvebu_gpio_probe,
diff --git a/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch b/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch
deleted file mode 100644
index aecf8e3c12..0000000000
--- a/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-Ensure that when there is an error during probe that the gpiochip is
-removed and the generic irq chip is removed.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/gpio-mvebu.c | 23 +++++++++++++++++------
- 1 file changed, 17 insertions(+), 6 deletions(-)
-
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -667,6 +667,7 @@ static int mvebu_gpio_probe(struct platf
- unsigned int ngpios;
- int soc_variant;
- int i, cpu, id;
-+ int err;
-
- match = of_match_device(mvebu_gpio_of_match, &pdev->dev);
- if (match)
-@@ -785,14 +786,16 @@ static int mvebu_gpio_probe(struct platf
- mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1);
- if (mvchip->irqbase < 0) {
- dev_err(&pdev->dev, "no irqs\n");
-- return mvchip->irqbase;
-+ err = mvchip->irqbase;
-+ goto err_gpiochip_add;
- }
-
- gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase,
- mvchip->membase, handle_level_irq);
- if (!gc) {
- dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n");
-- return -ENOMEM;
-+ err = -ENOMEM;
-+ goto err_gpiochip_add;
- }
-
- gc->private = mvchip;
-@@ -823,13 +826,21 @@ static int mvebu_gpio_probe(struct platf
- if (!mvchip->domain) {
- dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n",
- mvchip->chip.label);
-- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
-- IRQ_LEVEL | IRQ_NOPROBE);
-- kfree(gc);
-- return -ENODEV;
-+ err = -ENODEV;
-+ goto err_generic_chip;
- }
-
- return 0;
-+
-+err_generic_chip:
-+ irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
-+ IRQ_LEVEL | IRQ_NOPROBE);
-+ kfree(gc);
-+
-+err_gpiochip_add:
-+ gpiochip_remove(&mvchip->chip);
-+
-+ return err;
- }
-
- static struct platform_driver mvebu_gpio_driver = {
diff --git a/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch
deleted file mode 100644
index 19376f82b5..0000000000
--- a/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch
+++ /dev/null
@@ -1,433 +0,0 @@
-Armada 370/XP devices can 'blink' gpio lines with a configurable on
-and off period. This can be modelled as a PWM.
-
-However, there are only two sets of PWM configuration registers for
-all the gpio lines. This driver simply allows a single gpio line per
-gpio chip of 32 lines to be used as a PWM. Attempts to use more return
-EBUSY.
-
-Due to the interleaving of registers it is not simple to separate the
-PWM driver from the gpio driver. Thus the gpio driver has been
-extended with a PWM driver.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- drivers/gpio/Kconfig | 5 ++
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpio-mvebu.c | 37 +++-----
- drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++
- 5 files changed, 299 insertions(+), 25 deletions(-)
- create mode 100644 drivers/gpio/gpio-mvebu-pwm.c
- create mode 100644 drivers/gpio/gpio-mvebu.h
-
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -239,6 +239,11 @@ config GPIO_MVEBU
- select GPIO_GENERIC
- select GENERIC_IRQ_CHIP
-
-+config GPIO_MVEBU_PWM
-+ def_bool y
-+ depends on GPIO_MVEBU
-+ depends on PWM
-+
- config GPIO_MXC
- def_bool y
- depends on ARCH_MXC
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
- obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o
- obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o
- obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
-+obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
- obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
---- /dev/null
-+++ b/drivers/gpio/gpio-mvebu-pwm.c
-@@ -0,0 +1,202 @@
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/gpio.h>
-+#include <linux/pwm.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include "gpio-mvebu.h"
-+#include "gpiolib.h"
-+
-+static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip)
-+{
-+ return mvchip->membase + GPIO_BLINK_CNT_SELECT;
-+}
-+
-+static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip)
-+{
-+ return container_of(chip, struct mvebu_pwm, chip);
-+}
-+
-+static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm)
-+{
-+ return container_of(pwm, struct mvebu_gpio_chip, pwm);
-+}
-+
-+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
-+ unsigned long flags;
-+ int ret = 0;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ if (pwm->used) {
-+ ret = -EBUSY;
-+ } else {
-+ if (!desc) {
-+ ret = -ENODEV;
-+ goto out;
-+ }
-+ ret = gpiod_request(desc, "mvebu-pwm");
-+ if (ret)
-+ goto out;
-+
-+ ret = gpiod_direction_output(desc, 0);
-+ if (ret) {
-+ gpiod_free(desc);
-+ goto out;
-+ }
-+
-+ pwm->pin = pwmd->pwm - mvchip->chip.base;
-+ pwm->used = true;
-+ }
-+
-+out:
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+ return ret;
-+}
-+
-+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&pwm->lock, flags);
-+ gpiod_free(desc);
-+ pwm->used = false;
-+ spin_unlock_irqrestore(&pwm->lock, flags);
-+}
-+
-+static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd,
-+ int duty_ns, int period_ns)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+ unsigned int on, off;
-+ unsigned long long val;
-+ u32 u;
-+
-+ val = (unsigned long long) pwm->clk_rate * duty_ns;
-+ do_div(val, NSEC_PER_SEC);
-+ if (val > UINT_MAX)
-+ return -EINVAL;
-+ if (val)
-+ on = val;
-+ else
-+ on = 1;
-+
-+ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns);
-+ do_div(val, NSEC_PER_SEC);
-+ if (val > UINT_MAX)
-+ return -EINVAL;
-+ if (val)
-+ off = val;
-+ else
-+ off = 1;
-+
-+ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
-+ u &= ~(1 << pwm->pin);
-+ u |= (pwm->id << pwm->pin);
-+ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip));
-+
-+ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION);
-+ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION);
-+
-+ return 0;
-+}
-+
-+static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+
-+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1);
-+
-+ return 0;
-+}
-+
-+static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd)
-+{
-+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip);
-+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm);
-+
-+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0);
-+}
-+
-+static const struct pwm_ops mvebu_pwm_ops = {
-+ .request = mvebu_pwm_request,
-+ .free = mvebu_pwm_free,
-+ .config = mvebu_pwm_config,
-+ .enable = mvebu_pwm_enable,
-+ .disable = mvebu_pwm_disable,
-+ .owner = THIS_MODULE,
-+};
-+
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
-+{
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+
-+ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip));
-+ pwm->blink_on_duration =
-+ readl_relaxed(pwm->membase + BLINK_ON_DURATION);
-+ pwm->blink_off_duration =
-+ readl_relaxed(pwm->membase + BLINK_OFF_DURATION);
-+}
-+
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
-+{
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+
-+ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip));
-+ writel_relaxed(pwm->blink_on_duration,
-+ pwm->membase + BLINK_ON_DURATION);
-+ writel_relaxed(pwm->blink_off_duration,
-+ pwm->membase + BLINK_OFF_DURATION);
-+}
-+
-+/*
-+ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs
-+ * don't have this hardware. So if we don't have the necessary
-+ * resource, it is not an error.
-+ */
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct mvebu_pwm *pwm = &mvchip->pwm;
-+ struct resource *res;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
-+ if (!res)
-+ return 0;
-+
-+ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(mvchip->pwm.membase))
-+ return PTR_ERR(mvchip->percpu_membase);
-+
-+ if (id < 0 || id > 1)
-+ return -EINVAL;
-+ pwm->id = id;
-+
-+ if (IS_ERR(mvchip->clk))
-+ return PTR_ERR(mvchip->clk);
-+
-+ pwm->clk_rate = clk_get_rate(mvchip->clk);
-+ if (!pwm->clk_rate) {
-+ dev_err(dev, "failed to get clock rate\n");
-+ return -EINVAL;
-+ }
-+
-+ pwm->chip.dev = dev;
-+ pwm->chip.ops = &mvebu_pwm_ops;
-+ pwm->chip.base = mvchip->chip.base;
-+ pwm->chip.npwm = mvchip->chip.ngpio;
-+ pwm->chip.can_sleep = false;
-+
-+ spin_lock_init(&pwm->lock);
-+
-+ return pwmchip_add(&pwm->chip);
-+}
---- a/drivers/gpio/gpio-mvebu.c
-+++ b/drivers/gpio/gpio-mvebu.c
-@@ -42,10 +42,11 @@
- #include <linux/io.h>
- #include <linux/of_irq.h>
- #include <linux/of_device.h>
-+#include <linux/pwm.h>
- #include <linux/clk.h>
- #include <linux/pinctrl/consumer.h>
- #include <linux/irqchip/chained_irq.h>
--
-+#include "gpio-mvebu.h"
- /*
- * GPIO unit register offsets.
- */
-@@ -75,24 +76,6 @@
-
- #define MVEBU_MAX_GPIO_PER_BANK 32
-
--struct mvebu_gpio_chip {
-- struct gpio_chip chip;
-- spinlock_t lock;
-- void __iomem *membase;
-- void __iomem *percpu_membase;
-- int irqbase;
-- struct irq_domain *domain;
-- int soc_variant;
--
-- /* Used to preserve GPIO registers across suspend/resume */
-- u32 out_reg;
-- u32 io_conf_reg;
-- u32 blink_en_reg;
-- u32 in_pol_reg;
-- u32 edge_mask_regs[4];
-- u32 level_mask_regs[4];
--};
--
- /*
- * Functions returning addresses of individual registers for a given
- * GPIO controller.
-@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch
- return (u >> pin) & 1;
- }
-
--static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
-+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value)
- {
- struct mvebu_gpio_chip *mvchip =
- container_of(chip, struct mvebu_gpio_chip, chip);
-@@ -609,6 +592,8 @@ static int mvebu_gpio_suspend(struct pla
- BUG();
- }
-
-+ mvebu_pwm_suspend(mvchip);
-+
- return 0;
- }
-
-@@ -652,6 +637,8 @@ static int mvebu_gpio_resume(struct plat
- BUG();
- }
-
-+ mvebu_pwm_resume(mvchip);
-+
- return 0;
- }
-
-@@ -663,7 +650,6 @@ static int mvebu_gpio_probe(struct platf
- struct resource *res;
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-- struct clk *clk;
- unsigned int ngpios;
- int soc_variant;
- int i, cpu, id;
-@@ -693,10 +679,10 @@ static int mvebu_gpio_probe(struct platf
- return id;
- }
-
-- clk = devm_clk_get(&pdev->dev, NULL);
-+ mvchip->clk = devm_clk_get(&pdev->dev, NULL);
- /* Not all SoCs require a clock.*/
-- if (!IS_ERR(clk))
-- clk_prepare_enable(clk);
-+ if (!IS_ERR(mvchip->clk))
-+ clk_prepare_enable(mvchip->clk);
-
- mvchip->soc_variant = soc_variant;
- mvchip->chip.label = dev_name(&pdev->dev);
-@@ -830,7 +816,8 @@ static int mvebu_gpio_probe(struct platf
- goto err_generic_chip;
- }
-
-- return 0;
-+ /* Armada 370/XP has simple PWM support for gpio lines */
-+ return mvebu_pwm_probe(pdev, mvchip, id);
-
- err_generic_chip:
- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
---- /dev/null
-+++ b/drivers/gpio/gpio-mvebu.h
-@@ -0,0 +1,79 @@
-+/*
-+ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins
-+ *
-+ * Copyright (C) 2015, Andrew Lunn <andrew@lunn.ch>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef MVEBU_GPIO_PWM_H
-+#define MVEBU_GPIO_PWM_H
-+
-+#define BLINK_ON_DURATION 0x0
-+#define BLINK_OFF_DURATION 0x4
-+#define GPIO_BLINK_CNT_SELECT 0x0020
-+
-+struct mvebu_pwm {
-+ void __iomem *membase;
-+ unsigned long clk_rate;
-+ bool used;
-+ unsigned pin;
-+ struct pwm_chip chip;
-+ int id;
-+ spinlock_t lock;
-+
-+ /* Used to preserve GPIO/PWM registers across suspend /
-+ * resume */
-+ u32 blink_select;
-+ u32 blink_on_duration;
-+ u32 blink_off_duration;
-+};
-+
-+struct mvebu_gpio_chip {
-+ struct gpio_chip chip;
-+ spinlock_t lock;
-+ void __iomem *membase;
-+ void __iomem *percpu_membase;
-+ int irqbase;
-+ struct irq_domain *domain;
-+ int soc_variant;
-+ struct clk *clk;
-+#ifdef CONFIG_PWM
-+ struct mvebu_pwm pwm;
-+#endif
-+ /* Used to preserve GPIO registers across suspend/resume */
-+ u32 out_reg;
-+ u32 io_conf_reg;
-+ u32 blink_en_reg;
-+ u32 in_pol_reg;
-+ u32 edge_mask_regs[4];
-+ u32 level_mask_regs[4];
-+};
-+
-+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value);
-+
-+#ifdef CONFIG_PWM
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id);
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip);
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip);
-+#else
-+int mvebu_pwm_probe(struct platform_device *pdev,
-+ struct mvebu_gpio_chip *mvchip,
-+ int id)
-+{
-+ return 0;
-+}
-+
-+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip)
-+{
-+}
-+
-+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip)
-+{
-+}
-+#endif
-+#endif
diff --git a/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch b/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch
deleted file mode 100644
index 48f93944bf..0000000000
--- a/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-Document the optional parameters needed for PWM operation of gpio
-lines.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
-+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
-@@ -38,6 +38,23 @@ Required properties:
- - #gpio-cells: Should be two. The first cell is the pin number. The
- second cell is reserved for flags, unused at the moment.
-
-+Optional properties:
-+
-+In order to use the gpio lines in PWM mode, some additional optional
-+properties are required. Only Armada 370 and XP supports these
-+properties.
-+
-+- reg: an additional register set is needed, for the GPIO Blink
-+ Counter on/off registers.
-+
-+- reg-names: Must contain an entry "pwm" corresponding to the
-+ additional register range needed for pwm operation.
-+
-+- #pwm-cells: Should be two. The first cell is the pin number. The
-+ second cell is reserved for flags, unused at the moment.
-+
-+- clocks: Must be a phandle to the clock for the gpio controller.
-+
- Example:
-
- gpio0: gpio@d0018100 {
-@@ -51,3 +68,17 @@ Example:
- #interrupt-cells = <2>;
- interrupts = <16>, <17>, <18>, <19>;
- };
-+
-+ gpio1: gpio@18140 {
-+ compatible = "marvell,orion-gpio";
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
-+ ngpios = <17>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ #pwm-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ interrupts = <87>, <88>, <89>;
-+ clocks = <&coreclk 0>;
-+ };
diff --git a/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch b/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch
deleted file mode 100644
index 2f81504a50..0000000000
--- a/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch
+++ /dev/null
@@ -1,149 +0,0 @@
-Add properties to the gpio nodes to allow them to be also used
-as pwm lines.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++--
- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++--
- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++--
- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++--
- 4 files changed, 30 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -123,24 +123,30 @@
-
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -169,24 +169,30 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <17>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>;
-+ clocks = <&coreclk 0>;
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -253,24 +253,28 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -291,24 +291,30 @@
- internal-regs {
- gpio0: gpio@18100 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18100 0x40>;
-+ reg = <0x18100 0x40>, <0x181c0 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <82>, <83>, <84>, <85>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio1: gpio@18140 {
- compatible = "marvell,orion-gpio";
-- reg = <0x18140 0x40>;
-+ reg = <0x18140 0x40>, <0x181c8 0x08>;
-+ reg-names = "gpio", "pwm";
- ngpios = <32>;
- gpio-controller;
- #gpio-cells = <2>;
-+ #pwm-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <87>, <88>, <89>, <90>;
-+ clocks = <&coreclk 0>;
- };
-
- gpio2: gpio@18180 {
diff --git a/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch b/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch
deleted file mode 100644
index 9c46e6885d..0000000000
--- a/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-Now that the gpio driver also supports PWM operation, enable
-the PWM framework in mvebu_v7_defconfig.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/configs/mvebu_v7_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/configs/mvebu_v7_defconfig
-+++ b/arch/arm/configs/mvebu_v7_defconfig
-@@ -116,6 +116,7 @@ CONFIG_DMADEVICES=y
- CONFIG_MV_XOR=y
- # CONFIG_IOMMU_SUPPORT is not set
- CONFIG_MEMORY=y
-+CONFIG_PWM=y
- CONFIG_EXT4_FS=y
- CONFIG_ISO9660_FS=y
- CONFIG_JOLIET=y
diff --git a/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch b/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch
deleted file mode 100644
index 8af5eba5b0..0000000000
--- a/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-The mvebu gpio driver can also perform PWM on some pins. Us the
-pwm-fan driver to control the fan of the WRT1900AC, giving us fine
-grain control over its speed and hence noise.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
----
- arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-xp-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-mamba.dts
-@@ -302,13 +302,11 @@
- };
- };
-
-- gpio_fan {
-+ pwm_fan {
- /* SUNON HA4010V4-0000-C99 */
-- compatible = "gpio-fan";
-- gpios = <&gpio0 24 0>;
-
-- gpio-fan,speed-map = <0 0
-- 4500 1>;
-+ compatible = "pwm-fan";
-+ pwms = <&gpio0 24 4000 0>;
- };
-
- mvsw61xx {
diff --git a/target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch
deleted file mode 100644
index 80cec30649..0000000000
--- a/target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-rd.dts
-+++ b/arch/arm/boot/dts/armada-385-rd.dts
-@@ -42,6 +42,16 @@
- compatible = "st,m25p128";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition@1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
diff --git a/target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch
deleted file mode 100644
index 0c59d47956..0000000000
--- a/target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
-diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
-index 02db04867d8f..2a58443e2504 100644
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -134,6 +134,21 @@
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-+
-+ mtd0@00000000 {
-+ label = "u-boot";
-+ reg = <0x00000000 0x00800000>;
-+ };
-+
-+ mtd1@00800000 {
-+ label = "kernel";
-+ reg = <0x00800000 0x00800000>;
-+ };
-+
-+ mtd2@01000000 {
-+ label = "ubi";
-+ reg = <0x01000000 0x3f000000>;
-+ };
- };
- };
-
---
-2.2.1
-