diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-09-27 00:16:33 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-17 13:36:11 +0100 |
| commit | 38bdfcdb87e9b3a1232e9820bd6534da4c28282b (patch) | |
| tree | 0d548e896d109870cb6b7f71a7b0e3f8379bcaa8 /target/linux/mxs | |
| parent | 01d39cd18c4035e362f179548cd2c051aac03042 (diff) | |
| download | upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.gz upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.tar.bz2 upstream-38bdfcdb87e9b3a1232e9820bd6534da4c28282b.zip | |
ramips: add support for ipTIME A104ns
ipTIME A104ns is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A.
Specifications:
- SoC: MT7620A
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
- 2.4GHz: SoC internal
- 5GHz: MT7610EN
- Ethernet: 5x 10/100Mbps
- Switch: SoC internal
- USB: 1x 2.0
- UART:
- J2: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
In contrast to to-be-supported A1004ns, the A104ns has no usable
value in 0x1fc40 (uboot), so wan_mac needs to be calculated.
Also note that GPIOs for the LEDs really are inverted compared to
the A1004ns.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[moved state_default to device DTS, reordered properties in wmac,
added comment about wan_mac and LED GPIOs]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/mxs')
0 files changed, 0 insertions, 0 deletions