diff options
| author | Amish Vishwakarma <vishwakarma.amish@gmail.com> | 2021-06-05 12:31:00 +0530 |
|---|---|---|
| committer | David Bauer <mail@david-bauer.net> | 2021-06-13 11:32:31 +0200 |
| commit | d22fb7f4fd833c420bc2ab34384862da0a6688b5 (patch) | |
| tree | 4e800c3c5bc6dc58a4c11654c8b8fe52853a1429 /target/linux/pistachio/patches-5.4 | |
| parent | 9bf654ac4742326ddda6656182f5bae00ad3757b (diff) | |
| download | upstream-d22fb7f4fd833c420bc2ab34384862da0a6688b5.tar.gz upstream-d22fb7f4fd833c420bc2ab34384862da0a6688b5.tar.bz2 upstream-d22fb7f4fd833c420bc2ab34384862da0a6688b5.zip | |
ramips: add support for TP-Link Archer C6 v3
The patch adds support for the TP-Link Archer C6 v3 (FCC ID TE7A6V3)
The patch adds identification changes to the existing TP-Link Archer A6,
by Vinay Patil <post2vinay@gmail.com>, which has identical hardware.
Specification
-------------
MediaTek MT7621 SOC
RAM: 128MB DDR3
SPI Flash: W25Q128 (16MB)
Ethernet: MT7530 5x 1000Base-T
WiFi 5GHz: Mediatek MT7613BE
WiFi 2.4GHz: Mediatek MT7603E
UART/Serial: 115200 8n1
Device Configuration & Serial Port Pins
---------------------------------------
ETH Ports: LAN4 LAN3 LAN2 LAN1 WAN
_______________________
| |
Serial Pins: | VCC GND TXD RXD |
|_____________________|
LEDs: Power Wifi2G Wifi5G LAN WAN
Build Output
------------
The build will generate following set of files
[1] openwrt-ramips-mt7621-tplink_archer-c6-v3-initramfs-kernel.bin
[2] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-factory.bin
[3] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-sysupgrade.bin
How to Use - Flashing from TP-Link Web Interface
------------------------------------------------
* Go to "Advanced/System Tools/Firmware Update".
* Click "Browse" and upload the OpenWrt factory image: factory.bin[2]
* Click the "Upgrade" button, and select "Yes" when prompted.
TFTP Booting
------------
Setup a TFTP boot server with address 192.168.0.5.
While starting U-boot press '4' key to stop autoboot.
Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin
From u-boot command prompt run tftpboot followed by bootm.
Recovery
--------
Archer A6 V3 has recovery page activated if SPI booting from flash fails.
Recovery page can be activated by powercycling the router four times
before the boot process is complete.
Note: TFTP boot can be activated only from u-boot serial console.
Device recovery address: 192.168.0.1
Signed-off-by: Amish Vishwakarma <vishwakarma.amish@gmail.com>
[fix indent]
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/linux/pistachio/patches-5.4')
0 files changed, 0 insertions, 0 deletions