aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files/etc/diag.sh
diff options
context:
space:
mode:
authorHenryk Heisig <hyniu@o2.pl>2018-01-28 19:49:38 +0100
committerJohn Crispin <john@phrozen.org>2018-02-11 16:04:16 +0100
commit14951e8f8e09ba6e2cff140769189a66155a5345 (patch)
tree5a9e873b663e37d6324cda25e3d86032a093ead1 /target/linux/ramips/base-files/etc/diag.sh
parente39a240ba28c9081d861a6d4e01a70b61d6097d4 (diff)
downloadupstream-14951e8f8e09ba6e2cff140769189a66155a5345.tar.gz
upstream-14951e8f8e09ba6e2cff140769189a66155a5345.tar.bz2
upstream-14951e8f8e09ba6e2cff140769189a66155a5345.zip
ramips: add support for TP-Link Archer C50 v3
TP-Link Archer C50 v3 is a router with 5-port FE switch and non-detachable antennas. It's based on MediaTek MT7628N+MT7612E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 4x external, non-detachable antennas - UART (J1) header on PCB (115200 8n1) - 7x LED (GPIO-controlled*), 2x button, power switch * WAN LED in this devices is a dual-color, dual-leads type which isn't (fully) supported by gpio-leds driver. This type of LED requires both GPIOs state change at the same time to select color or turn it off. For now, we support/use only the green part of the LED. Flash instruction: The only way to flash LEDE image in ArcherC50v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt7628-ArcherC50v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target/linux/ramips/base-files/etc/diag.sh')
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 068df1df68..6b11fb2872 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -39,6 +39,7 @@ get_status_led() {
pwh2004|\
r6220|\
tplink,c20-v4|\
+ tplink,c50-v3|\
tplink,tl-mr3420-v5|\
tl-wr840n-v4|\
tl-wr840n-v5|\