aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/base-files
diff options
context:
space:
mode:
authorAlex Maclean <monkeh@monkeh.net>2017-07-23 20:06:44 +0100
committerMathias Kresin <dev@kresin.me>2017-07-25 21:02:53 +0200
commitf683385e73f09c13fd08c3d352f3f1739c1944c4 (patch)
treed5a10f6a8d7fbfa6a6639b9a202a88c6cc7616eb /target/linux/ramips/base-files
parent1c7144f078c98dbf0e6c70c534b98fe6186f19d6 (diff)
downloadupstream-f683385e73f09c13fd08c3d352f3f1739c1944c4.tar.gz
upstream-f683385e73f09c13fd08c3d352f3f1739c1944c4.tar.bz2
upstream-f683385e73f09c13fd08c3d352f3f1739c1944c4.zip
ramips: add support for TP-Link RE350
The TP-Link RE350 is a wall-wart AC1200 range extender/access point with a single gigabit ethernet port and two non-detachable antennas, based on the MT7621A SoC with MT7603E and MT7612E radios. Firmware wise it is very similar to the QCA based RE450. SoC: MediaTek MT7621A (880MHz) Flash: 8MiB (Winbond W25Q64) RAM: 64MiB (DDR2) Ethernet: 1x 1Gbit Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E) LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act (green) Buttons: On/off, LED, reset, WPS Serial header at J1, 57600 8n1: Pin 1 TX Pin 2 RX Pin 3 GND Pin 4 3.3V Factory image can be uploaded directly through the stock UI. Signed-off-by: Alex Maclean <monkeh@monkeh.net>
Diffstat (limited to 'target/linux/ramips/base-files')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh7
5 files changed, 21 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 83141dedd8..8ea464516c 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -308,6 +308,12 @@ r6220)
set_wifi_led "$board:green:wifi"
set_usb_led "$board:green:usb"
;;
+re350-v1)
+ ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$board:blue:wifi2G" "wlan0"
+ ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$board:blue:wifi5G" "wlan1"
+ ucidef_set_led_netdev "eth_act" "LAN act" "$board:green:eth_act" "eth0" "tx rx"
+ ucidef_set_led_switch "eth_link" "LAN link" "$board:green:eth_link" "switch0" "0x01"
+ ;;
re6500)
ucidef_set_led_default "power" "power" "$board:white:power" "1"
ucidef_set_led_default "wifi" "wifi" "$board:orange:wifi" "1"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index d0f3fce135..5cc711949f 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -270,6 +270,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan:2" "2:lan:1" "4:wan" "6@eth0"
;;
+ re350-v1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "6@eth0"
+ ;;
re6500)
ucidef_add_switch "switch0" \
"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "6@eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 1349c00b32..3933357aad 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -119,6 +119,7 @@ get_status_led() {
dap-1350|\
na930|\
pbr-m1|\
+ re350-v1|\
rt-ac51u|\
rt-n13u|\
rt-n14u|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index e2d7b07ecb..0fd871a5d6 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -427,6 +427,9 @@ ramips_board_detect() {
*"RB750Gr3")
name="rb750gr3"
;;
+ *"RE350 v1")
+ name="re350-v1"
+ ;;
*"RE6500")
name="re6500"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 36469ca704..830e129115 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -253,6 +253,13 @@ platform_check_image() {
# these boards use metadata images
return 0
;;
+ re350-v1)
+ [ "$magic" != "01000000" ] && {
+ echo "Invalid image type."
+ return 1
+ }
+ return 0
+ ;;
ubnt-erx|\
ubnt-erx-sfp)
nand_do_platform_check "$board" "$1"