ramips/rt288x,rt3883: Name DTS files based on scheme

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

1 files changed, 0 insertions, 116 deletions

diff --git a/target/linux/ramips/dts/AR670W.dts b/target/linux/ramips/dts/AR670W.dts
deleted file mode 100644
index 96e4a8cbe2..0000000000
--- a/target/linux/ramips/dts/AR670W.dts
+++ /dev/null
@@ -1,116 +0,0 @@
-/dts-v1/;
-
-#include "rt2880.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	compatible = "airlink101,ar670w", "ralink,rt2880-soc";
-	model = "Airlink101 AR670W";
-
-	aliases {
-		led-boot = &led_power;
-		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
-	};
-
-	cfi@bdc00000 {
-		compatible = "cfi-flash";
-		reg = <0xbc400000 0x800000>;
-		bank-width = <2>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				reg = <0x0 0x30000>;
-				label = "u-boot";
-				read-only;
-			};
-
-			factory: partition@30000 {
-				reg = <0x30000 0x10000>;
-				label = "factory";
-				read-only;
-			};
-
-			partition@40000 {
-				compatible = "lzma";
-				reg = <0x40000 0x3c0000>;
-				label = "firmware";
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_power: power {
-			label = "ar670w:green:power";
-			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		};
-
-		wpsblue {
-			label = "ar670w:blue:wps";
-			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
-
-		wps {
-			label = "wps";
-			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WPS_BUTTON>;
-		};
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&pinctrl {
-	state_default: pinctrl0 {
-		gpio {
-			ralink,group = "i2c", "spi", "uartlite";
-			ralink,function = "gpio";
-		};
-	};
-};
-
-&ethernet {
-	status = "okay";
-	mtd-mac-address = <&factory 0x2004>;
-
-	port@0 {
-		phy-handle = <&phy0>;
-		phy-mode = "mii";
-	};
-
-	mdio-bus {
-		status = "okay";
-
-		phy0: ethernet-phy@0 {
-			phy-mode = "mii";
-			reg = <0>;
-		};
-	};
-};
-
-&wmac {
-	status = "okay";
-	ralink,mtd-eeprom = <&factory 0x2000>;
-};