ramips: fix Omnima models, images and profiles names

Official names for supported Omnima products are (as on website):
 * Omnima HPM
 * Omnima MiniEMBWiFi
 * Omnima MiniEMBPlug

This patch changes:
 * board names
 * dts filenames
 * profile names
 * image filenames
 * LED names

for Omnima devices, for consistency.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46627

1 files changed, 0 insertions, 149 deletions

diff --git a/target/linux/ramips/dts/OMNI-EMB-HPM.dts b/target/linux/ramips/dts/OMNI-EMB-HPM.dts
deleted file mode 100644
index 9540f4fbdd..0000000000
--- a/target/linux/ramips/dts/OMNI-EMB-HPM.dts
+++ /dev/null
@@ -1,149 +0,0 @@
-/dts-v1/;
-
-/include/ "rt3883.dtsi"
-
-/ {
-	compatible = "OMNI-EMB-HPM", "ralink,rt3883-soc";
-	model = "Omnima EMB HPM";
-
-	chosen {
-		bootargs = "console=ttyS0,115200";
-	};
-
-	palmbus@10000000 {
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				compatible = "macronix,mx25l12805d";
-				spi-max-frequency = <25000000>;
-				reg = <0>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partition@0 {
-					reg = <0x0 0x0030000>;
-					label = "u-boot";
-					read-only;
-				};
-
-				partition@30000 {
-					reg = <0x00030000 0x00010000>;
-					label = "config";
-					read-only;
-				};
-
-				factory: partition@40000 {
-					reg = <0x00040000 0x00010000>;
-					label = "factory";
-					read-only;
-				};
-
-				partition@50000 {
-					reg = <0x00050000 0x00fb0000>;
-					label = "firmware";
-				};
-			};
-		};
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "jtag", "uartf";
-				ralink,function = "gpio";
-			};
-		};
-	};
-
-	ethernet@10100000 {
-		phy-handle = <&phy0>;
-		phy-mode = "rgmii";
-		mtd-mac-address = <&factory 0x28>;
-
-		mdio-bus {
-			status = "okay";
-
-			phy0: ethernet-phy@4 {
-				reg = <4>;
-			};
-		};
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
-	ehci@101c0000 {
-		status = "okay";
-	};
-
-	ohci@101c1000 {
-		status = "okay";
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio0 14 0>;
-			linux,code = <0x198>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power {
-			label = "emb:orange:power";
-			gpios = <&gpio0 7 1>;
-		};
-
-		status {
-			label = "emb:green:status";
-			gpios = <&gpio0 21 1>;
-		};
-
-		eth {
-			label = "emb:green:eth";
-			gpios = <&gpio0 20 1>;
-		};
-
-		eth2 {
-			label = "emb:red:eth";
-			gpios = <&gpio0 18 1>;
-		};
-
-		wifi {
-			label = "emb:green:wifi";
-			gpios = <&gpio0 17 1>;
-		};
-
-		wifi2 {
-			label = "emb:red:wifi";
-			gpios = <&gpio0 19 1>;
-		};
-	};
-
-	gpio_export {
-		compatible = "gpio-export";
-		#size-cells = <0>;
-		/* gpio 12 and 13 handle the OC input */
-
-		usb0 {
-			gpio-export,name = "usb0";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 2 0>;
-		};
-
-		usb1 {
-			gpio-export,name = "usb1";
-			gpio-export,output = <1>;
-			gpios = <&gpio0 1 0>;
-		};
-	};
-};